P037B 2016 GMC Sierra Code - Wait To Start Indicator Control Circuit High Voltage
Quick Answer
The P037B diagnostic trouble code (DTC) specifically pertains to the Wait To Start (WTS) indicator control circuit in a 2016 GMC Sierra. Common causes include Faulty WTS indicator control module, Wiring issues such as shorts or open circuits, Corrosion or poor connections in the control circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P037B 2016 GMC Sierra indicates Wait To Start Indicator Control Circuit High Voltage.
- Common causes
- Common causes include Faulty WTS indicator control module, Wiring issues such as shorts or open circuits, Corrosion or poor connections in the control circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P037B 2016 GMC Sierra Description
The P037B diagnostic trouble code (DTC) specifically pertains to the Wait To Start (WTS) indicator control circuit in a 2016 GMC Sierra. This code indicates that there is a high voltage condition detected in the circuit responsible for controlling the WTS indicator. The WTS indicator is typically found on the dashboard of diesel vehicles and is used to inform the driver when the engine is ready to be started.
Common Causes of P037B 2016 GMC Sierra
- Faulty WTS indicator control module
- Wiring issues such as shorts or open circuits
- Corrosion or poor connections in the control circuit
- Issues with the engine control module (ECM)
- Electrical system malfunctions
Symptoms of P037B 2016 GMC Sierra
- WTS indicator not illuminating when it should
- Inaccurate or erratic WTS indicator behavior
- Difficulty starting the engine
- Poor fuel economy
- Illumination of the check engine light
How to Fix P037B 2016 GMC Sierra
- Begin by conducting a thorough inspection of the WTS indicator control circuit, checking for any visible damage or corrosion.
- Use a multimeter to test the voltage in the circuit and compare it to the manufacturer's specifications.
- Check the wiring harness for any signs of wear or damage, repairing or replacing any faulty wiring as needed.
- Inspect the WTS indicator control module and the ECM for any malfunctions, replacing them if necessary.
- Clear the DTC from the vehicle's memory using a diagnostic scan tool and test the WTS indicator to ensure it is functioning correctly.
Cost to Fix P037B 2016 GMC Sierra
The typical repair costs for addressing a P037B code in a 2016 GMC Sierra can range from $150 to $400, depending on the extent of the issue and the specific components that require replacement. It's important to note that labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate. Additionally, the cost of parts such as the WTS indicator control module or wiring harness will also contribute to the overall repair expenses.
Need more information about the P037B 2016 GMC Sierra code?
Need more information on how to fix the P037B 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P037B 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P037B 2016 GMC Sierra Code
What does the OBDII code P037B mean on a 2016 GMC Sierra?
The P037B code indicates a high-voltage issue in the Wait to Start Indicator Control Circuit, which is related to the glow plug system in diesel engines.
What are the common symptoms of the P037B code in a 2016 GMC Sierra?
Symptoms include the Wait to Start indicator not functioning properly, extended engine cranking, rough cold starts, or the check engine light turning on.
What causes the P037B code to appear on a 2016 GMC Sierra?
Common causes include a faulty Wait to Start indicator bulb, damaged wiring or connectors in the circuit, or a malfunctioning glow plug control module.
Can I drive my 2016 GMC Sierra with the P037B code?
While the vehicle may still be drivable, ignoring this code can result in hard starting or damage to the glow plug system, especially in cold weather.
How do I diagnose the P037B code on my 2016 GMC Sierra?
Diagnosis involves checking the Wait to Start indicator bulb, inspecting the circuit wiring and connectors for damage, and testing the glow plug control module for proper operation.
What tools are needed to diagnose the P037B code?
You'll need an OBDII scanner, a multimeter to check circuit voltage, and potentially a wiring diagram for the Wait to Start system.
How do I fix the P037B code on my 2016 GMC Sierra?
Repairs may include replacing the Wait to Start indicator bulb, repairing or replacing damaged wiring, or replacing a faulty glow plug control module.
What can happen if the P037B code is not addressed?
If not addressed, the engine may suffer from starting issues in cold conditions, and the glow plug system could experience further damage.
Is the P037B code specific to diesel engines?
Yes, this code is specific to diesel engines, as it relates to the Wait to Start indicator and glow plug system.
Can a dead battery cause the P037B code?
A weak or dead battery can contribute to electrical issues, but it is not a direct cause of the P037B code. However, verifying proper battery voltage is recommended when diagnosing electrical problems.
Discuss the causes and fixes for P037B 2016 GMC Sierra OBDII Code
Code P037B 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.