P037A 2014 Chevrolet Silverado Code - Wait To Start Indicator Control Circuit Low Voltage
Quick Answer
The P037A diagnostic trouble code (DTC) indicates an issue with the Wait To Start Indicator Control Circuit in a 2014 Chevrolet Silverado. Common causes include Faulty wiring in the control circuit, Malfunctioning wait to start indicator control module, Poor connection or corrosion in the circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P037A 2014 Chevrolet Silverado indicates Wait To Start Indicator Control Circuit Low Voltage.
- Common causes
- Common causes include Faulty wiring in the control circuit, Malfunctioning wait to start indicator control module, Poor connection or corrosion in the circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P037A 2014 Chevrolet Silverado Description
The P037A diagnostic trouble code (DTC) indicates an issue with the Wait To Start Indicator Control Circuit in a 2014 Chevrolet Silverado. This code specifically points to a low voltage condition within the circuit responsible for controlling the wait to start indicator. The wait to start indicator is an important feature in diesel engines, signaling to the driver when the engine is ready to be started after the glow plugs have warmed up.
Common Causes of P037A 2014 Chevrolet Silverado
- Faulty wiring in the control circuit
- Malfunctioning wait to start indicator control module
- Poor connection or corrosion in the circuit
- Low battery voltage affecting the circuit
- Issues with the power supply to the control circuit
Symptoms of P037A 2014 Chevrolet Silverado
- Check engine light illuminated
- Extended cranking times
- Rough starting
- Failure to start
- Inaccurate wait to start indicator
How to Fix P037A 2014 Chevrolet Silverado
- Begin by performing a thorough visual inspection of the wiring and connectors in the wait to start indicator control circuit.
- Test the voltage at the control module and at various points in the circuit to identify any low voltage readings.
- Check for any loose connections or corrosion that may be affecting the circuit's performance.
- Replace any damaged wiring or connectors in the control circuit.
- If necessary, replace the wait to start indicator control module to resolve the low voltage issue.
Cost to Fix P037A 2014 Chevrolet Silverado
The typical repair costs for addressing the P037A DTC in a 2014 Chevrolet Silverado can vary depending on the extent of the issue and the specific components that require replacement. On average, the repair costs for this issue can range from $100 to $300, including both parts and labor. It's important to note that diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It's recommended to check with local auto repair shops for a more accurate estimate.
Need more information about the P037A 2014 Chevrolet Silverado code?
Need more information on how to fix the P037A 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P037A 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P037A 2014 Chevrolet Silverado Code
1. What does the OBDII code P037A mean on a 2014 Chevrolet Silverado?
P037A indicates a low voltage issue in the Wait to Start Indicator Control Circuit, which is commonly associated with diesel engines and their glow plug systems.
2. What are the symptoms of code P037A in a 2014 Chevrolet Silverado?
Symptoms may include the Wait to Start light not illuminating, poor cold starting performance, or no noticeable symptoms at all.
3. What causes the P037A code to appear?
Common causes include a faulty Wait to Start indicator bulb, damaged wiring or connectors in the circuit, a defective glow plug control module, or a failing ECM.
4. Can I drive my 2014 Chevrolet Silverado with the P037A code?
You may be able to drive the vehicle, but cold starts could be more difficult, and ignoring the issue could lead to long-term damage to the glow plug system.
5. How do I diagnose the P037A code?
Start by checking the Wait to Start indicator bulb, inspecting wiring and connectors for damage, and testing the glow plug control module and ECM for proper function.
6. How can I fix the P037A code on my Silverado?
Repairs may involve replacing a faulty indicator bulb, repairing damaged wiring or connectors, or replacing the glow plug control module if it’s defective.
7. How much does it cost to fix code P037A on a 2014 Chevrolet Silverado?
Repair costs can vary but typically range from $50 to $300, depending on whether the issue is a simple bulb replacement or a more complex problem like a faulty module.
8. Can a bad battery cause the P037A code?
Yes, a weak or failing battery can contribute to low voltage issues in the circuit and trigger the P037A code.
9. Is the P037A code specific to diesel engines?
Yes, the code is typically found on diesel vehicles, as it relates to the glow plug system and the Wait to Start indicator.
10. Will clearing the P037A code fix the problem?
Clearing the code may turn off the check engine light temporarily, but the underlying issue must be addressed to prevent the code from returning.
Discuss the causes and fixes for P037A 2014 Chevrolet Silverado OBDII Code
Code P037A 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.