P0369 2012 Ford Fusion Code - Camshaft Position Sensor 'B' Circuit Intermittent Bank 2

P0369 indicates an intermittent issue with the Camshaft Position Sensor 'B' Circuit on Bank 2, meaning the sensor is not providing consistent input to the Powertrain Control Module (PCM).

Common symptoms include a check engine light, rough idling, reduced engine performance, difficulty starting, poor fuel economy, or stalling.

Causes can include a faulty camshaft position sensor, damaged wiring or connectors, timing chain issues, or a failing PCM.

Inspect and repair any damaged wiring or connectors, replace the camshaft position sensor if necessary, check the timing chain alignment, and clear the code to see if it returns.

Sensor 'B' is located on the exhaust camshaft of Bank 2, which is typically the side of the engine opposite the number one cylinder.

Driving with P0369 is not recommended as it may cause poor performance, potential stalling, or further damage to the engine.

Repair costs vary, but replacing the camshaft position sensor typically costs $100–$300, including parts and labor. Wiring repairs or timing chain issues can increase costs.

A technician will use a scan tool to confirm the code, visually inspect wiring, test sensor output with a multimeter, and verify proper camshaft timing.

Yes, dirty or low oil levels can affect the operation of the camshaft position sensor or variable valve timing system, potentially triggering the code.

Not always. While a faulty sensor is a common cause, wiring issues, timing problems, or a PCM fault could also trigger the code and require further diagnosis.