P0355 2010 Ford Fusion Code - Ignition Coil 'E' Primary/Secondary Circuit
Quick Answer
The P0355 diagnostic trouble code (DTC) for a 2010 Ford Fusion indicates a problem with the Ignition Coil 'E' Primary/Secondary Circuit. Common causes include Faulty ignition coil, Damaged wiring or connectors, Defective spark plug. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0355 2010 Ford Fusion indicates Ignition Coil 'E' Primary/Secondary Circuit .
- Common causes
- Common causes include Faulty ignition coil, Damaged wiring or connectors, Defective spark plug.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0355 2010 Ford Fusion Description
The P0355 diagnostic trouble code (DTC) for a 2010 Ford Fusion indicates a problem with the Ignition Coil 'E' Primary/Secondary Circuit. This code specifically points to an issue with the electrical circuitry associated with the ignition coil for cylinder 'E'. The ignition coil is a crucial component of the ignition system, responsible for converting the low voltage from the battery into the high voltage needed to ignite the air-fuel mixture in the engine's cylinders. When this circuit malfunctions, it can lead to misfires, rough idling, decreased fuel efficiency, and even engine stalling.
Common Causes of P0355 2010 Ford Fusion
- Faulty ignition coil
- Damaged wiring or connectors
- Defective spark plug
- Issues with the engine control module (ECM)
- Environmental factors such as moisture or corrosion
Symptoms of P0355 2010 Ford Fusion
- Engine misfires
- Rough idling or vibrations
- Decreased fuel efficiency
- Engine stalling
- Illuminated check engine light
How to Fix P0355 2010 Ford Fusion
- Begin by diagnosing the specific cause of the issue using a scan tool to pinpoint the faulty component.
- Inspect the wiring and connectors associated with the ignition coil for any damage or corrosion. Repair or replace as necessary.
- Test the ignition coil using a multimeter to check for proper resistance values. Replace the ignition coil if it fails the test.
- Check the spark plug for signs of wear or damage. Replace if necessary.
- Clear the diagnostic trouble codes and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0355 2010 Ford Fusion
The typical repair costs for addressing the P0355 code on a 2010 Ford Fusion can range from $150 to $400, depending on the specific cause of the issue and the cost of parts and labor. It is important to note that diagnosis time and labor rates at auto repair shops can vary, with hourly rates typically ranging from $80 to $150. Factors such as location, vehicle make and model, and engine type can also impact the final repair costs. It is recommended to obtain quotes from local auto repair shops for a more accurate estimate.
When is the Code Detected?
Need more information about the P0355 2010 Ford Fusion code?
Need more information on how to fix the P0355 2010 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0355 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0355 2010 Ford Fusion Code
1. What does the OBDII code P0355 mean on a 2010 Ford Fusion?
P0355 indicates an issue in the Ignition Coil 'E' Primary/Secondary Circuit, which means the PCM (Powertrain Control Module) has detected a malfunction in the ignition coil circuit for cylinder 5.
2. What are the symptoms of code P0355 in a 2010 Ford Fusion?
Common symptoms include engine misfires, rough idling, reduced power, poor fuel economy, and the Check Engine Light illuminating.
3. What causes code P0355 in a 2010 Ford Fusion?
Possible causes include a faulty ignition coil, damaged or corroded wiring in the ignition coil circuit, a defective spark plug, or a malfunctioning PCM.
4. Can I drive my 2010 Ford Fusion with code P0355?
Driving with code P0355 is not recommended, as it can lead to engine misfires, reduced performance, and potential damage to the catalytic converter.
5. How do I diagnose code P0355 on a 2010 Ford Fusion?
Start by inspecting the ignition coil and its wiring for damage or corrosion. Use a multimeter to test the ignition coil's resistance and check for continuity in the wiring.
6. How do I fix code P0355 in a 2010 Ford Fusion?
Common fixes include replacing the faulty ignition coil, repairing or replacing damaged wiring, replacing the spark plug, or reprogramming the PCM if necessary.
7. How much does it cost to repair code P0355 on a 2010 Ford Fusion?
Repair costs depend on the issue but typically range from $50 to $250 for parts and labor, with ignition coil replacement being the most common fix.
8. Can a bad spark plug cause code P0355 in a 2010 Ford Fusion?
Yes, a faulty spark plug in cylinder 5 can cause improper ignition and trigger code P0355.
9. How do I prevent code P0355 in a 2010 Ford Fusion?
Regular maintenance, including inspecting and replacing spark plugs and ignition coils as needed, can help prevent this code.
10. Will clearing the code P0355 fix the problem in my 2010 Ford Fusion?
Clearing the code will turn off the Check Engine Light temporarily, but if the underlying issue is not resolved, the code will likely return.
Discuss the causes and fixes for P0355 2010 Ford Fusion OBDII Code
Code P0355 2010 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.