P0355 2008 Toyota Camry Code - Ignition Coil 5 Primary/Secondary Circuit
Quick Answer
The P0355 diagnostic trouble code (DTC) for a 2008 Toyota Camry indicates a problem with the ignition coil 5 primary/secondary circuit. Common causes include Faulty ignition coil, Wiring issues in the ignition coil circuit, Loose or corroded connections in the ignition coil circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0355 2008 Toyota Camry indicates Ignition Coil 5 Primary/Secondary Circuit.
- Common causes
- Common causes include Faulty ignition coil, Wiring issues in the ignition coil circuit, Loose or corroded connections in the ignition coil circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0355 2008 Toyota Camry Description
The P0355 diagnostic trouble code (DTC) for a 2008 Toyota Camry indicates a problem with the ignition coil 5 primary/secondary circuit. In a vehicle's ignition system, the ignition coil plays a crucial role in converting the low voltage from the battery into the high voltage needed to ignite the fuel-air mixture in the engine's cylinders. Ignition coil 5 is specific to the fifth cylinder in the engine.
Common Causes of P0355 2008 Toyota Camry
- Faulty ignition coil
- Wiring issues in the ignition coil circuit
- Loose or corroded connections in the ignition coil circuit
- PCM or ECM (engine control module) failure
- Spark plug issues
Symptoms of P0355 2008 Toyota Camry
- Engine misfires
- Rough idling or stalling
- Decreased fuel efficiency
- Illumination of the check engine light
- Lack of power or acceleration
How to Fix P0355 2008 Toyota Camry
- Diagnose the specific cause of the issue by using a scan tool to read the DTC and perform further testing on the ignition coil and related components.
- Inspect the wiring and connections in the ignition coil circuit for any damage, corrosion, or loose connections. Repair or replace as needed.
- Test the ignition coil using a multimeter to check for proper resistance and continuity. Replace the ignition coil if it fails the test.
- Clear the DTC from the PCM memory using the scan tool after the repair is completed.
- Test drive the vehicle to ensure that the issue has been resolved and that the check engine light does not reappear.
Cost to Fix P0355 2008 Toyota Camry
The typical repair costs for addressing a P0355 code on a 2008 Toyota Camry can vary depending on the specific cause of the issue. In general, the cost of replacing an ignition coil can range from $100 to $250, including parts and labor. Additional costs may apply if other components need to be replaced or if further diagnostics are required. It's important to note that labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate.
When is the Code Detected?
Need more information about the P0355 2008 Toyota Camry code?
Need more information on how to fix the P0355 2008 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0355 2008 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0355 2008 Toyota Camry Code
1. What does the OBDII code P0355 mean on a 2008 Toyota Camry?
P0355 indicates an issue with the ignition coil 5 primary or secondary circuit, meaning there is a problem in the fifth cylinder's ignition system.
2. What are the symptoms of code P0355 on a 2008 Toyota Camry?
Common symptoms include engine misfires, reduced fuel efficiency, rough idling, hesitation during acceleration, and the check engine light being illuminated.
3. What causes the P0355 code on a 2008 Toyota Camry?
Potential causes include a faulty ignition coil, damaged wiring or connectors in the coil circuit, a defective spark plug, or a malfunctioning engine control module (ECM).
4. How can I diagnose the P0355 code on my 2008 Toyota Camry?
Start by inspecting the ignition coil, spark plug, and associated wiring. Use a multimeter to check for proper voltage and resistance in the coil circuit. A scan tool can also help monitor cylinder-specific misfires.
5. Can I drive my 2008 Toyota Camry with a P0355 code?
Driving with a P0355 code is not recommended, as it can cause poor performance, damage the catalytic converter, and lead to further engine issues.
6. How do I fix the P0355 code on a 2008 Toyota Camry?
Common fixes include replacing the faulty ignition coil, repairing damaged wiring or connectors, replacing the spark plug, or, in rare cases, reprogramming or replacing the ECM.
7. How much does it cost to repair the P0355 code on a 2008 Toyota Camry?
The cost varies depending on the issue, but replacing an ignition coil typically costs $100-$200 for parts and labor, while spark plug replacement is usually less expensive.
8. Can a bad spark plug cause the P0355 code?
Yes, a bad or worn-out spark plug can cause the ignition coil to malfunction, triggering the P0355 code.
9. Will clearing the P0355 code fix the problem on my 2008 Toyota Camry?
Clearing the code will temporarily turn off the check engine light, but if the underlying issue is not fixed, the code will return.
10. How do I prevent the P0355 code from occurring again?
Regular maintenance, such as replacing spark plugs at recommended intervals and inspecting ignition components for wear, can help prevent this issue.
Discuss the causes and fixes for P0355 2008 Toyota Camry OBDII Code
Code P0355 2008 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.