P0353 2011 Ford Fusion Code - Ignition Coil 'C' Primary/Secondary Circuit
Quick Answer
The P0353 diagnostic trouble code (DTC) for a 2011 Ford Fusion indicates a problem with the ignition coil 'C' primary/secondary circuit. Common causes include The P0353 code can be triggered by a variety of issues, including a faulty ignition coil, damaged or corroded wiring in the circuit, a loose or disconnected connector, or a problem with the engine control module (ECM), Additionally, issues such as moisture intrusion, heat damage, or general wear and tear can also contribute to ignition coil circuit malfunctions. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0353 2011 Ford Fusion indicates Ignition Coil 'C' Primary/Secondary Circuit .
- Common causes
- Common causes include The P0353 code can be triggered by a variety of issues, including a faulty ignition coil, damaged or corroded wiring in the circuit, a loose or disconnected connector, or a problem with the engine control module (ECM), Additionally, issues such as moisture intrusion, heat damage, or general wear and tear can also contribute to ignition coil circuit malfunctions.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0353 2011 Ford Fusion Description
The P0353 diagnostic trouble code (DTC) for a 2011 Ford Fusion indicates a problem with the ignition coil 'C' primary/secondary circuit. This code specifically points to an issue with the electrical circuit that controls the ignition coil for cylinder 'C' in the engine. The ignition coil is responsible for converting the low voltage from the battery into the high voltage needed to create a spark in the spark plugs, which ignites the air-fuel mixture in the combustion chamber.
Common Causes of P0353 2011 Ford Fusion
The P0353 code can be triggered by a variety of issues, including a faulty ignition coil, damaged or corroded wiring in the circuit, a loose or disconnected connector, or a problem with the engine control module (ECM). Additionally, issues such as moisture intrusion, heat damage, or general wear and tear can also contribute to ignition coil circuit malfunctions.
Symptoms of P0353 2011 Ford Fusion
Some common symptoms associated with the P0353 code include engine misfires, rough idling, hesitation or stumbling during acceleration, a decrease in fuel efficiency, and possibly a noticeable loss of power. In some cases, the Check Engine Light may also illuminate on the dashboard.
How to Fix P0353 2011 Ford Fusion
To address the P0353 code, the following steps can be taken:
- Begin by performing a visual inspection of the ignition coil 'C' and its associated wiring and connectors. Look for any signs of damage, corrosion, or loose connections.
- Use a multimeter to test the ignition coil 'C' for proper resistance in both the primary and secondary circuits. Compare the readings to the manufacturer's specifications.
- If the ignition coil is found to be faulty, it will need to be replaced with a new one. Ensure that the replacement part is compatible with the make and model of the vehicle.
- Check and repair any damaged or corroded wiring in the ignition coil circuit. Make sure all connections are secure and free of debris.
- Clear the diagnostic trouble codes from the vehicle's computer using an OBD-II scanner, and then test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0353 2011 Ford Fusion
The typical repair costs for addressing the P0353 code on a 2011 Ford Fusion can vary depending on the specific cause of the issue and the cost of parts and labor in your area. On average, replacing an ignition coil can range from $100 to $300, while labor costs may range from $80 to $150 per hour. Keep in mind that additional diagnostic time may be required to pinpoint the exact cause of the problem, which could affect the overall repair cost. It's recommended to consult with a trusted mechanic or auto repair shop to get a more accurate estimate based on your specific situation.
When is the Code Detected?
Need more information about the P0353 2011 Ford Fusion code?
Need more information on how to fix the P0353 2011 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0353 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0353 2011 Ford Fusion Code
What does the OBDII code P0353 mean on a 2011 Ford Fusion?
P0353 indicates an issue with the ignition coil "C" primary or secondary circuit, meaning the vehicle's computer has detected a fault in the electrical signal to or from ignition coil "C."
What are the common symptoms of code P0353 in a 2011 Ford Fusion?
Common symptoms include engine misfires, rough idling, poor acceleration, reduced fuel efficiency, and the Check Engine Light being illuminated.
What causes the P0353 code on a 2011 Ford Fusion?
Possible causes include a faulty ignition coil, damaged or corroded wiring/connectors, a defective spark plug, or a malfunctioning powertrain control module (PCM).
Which ignition coil does "C" refer to in a 2011 Ford Fusion?
On a 2011 Ford Fusion with a 4-cylinder engine, ignition coil "C" typically refers to the third cylinder. For a V6 engine, consult the firing order in the service manual to identify coil "C."
Can I drive my 2011 Ford Fusion with code P0353?
It is not recommended to drive with this code active, as it can cause poor performance, potential engine damage, and increased emissions.
How do I diagnose the P0353 code on my 2011 Ford Fusion?
Start by inspecting the ignition coil "C," its wiring, and connectors for damage or corrosion. You can also test the coil with a multimeter or swap it with another cylinder’s coil to see if the issue moves.
How do I fix the P0353 code on a 2011 Ford Fusion?
Repairing this code may involve replacing the faulty ignition coil, repairing or replacing damaged wiring, cleaning connectors, or replacing a defective spark plug.
How much does it cost to fix the P0353 code on a 2011 Ford Fusion?
The cost can vary, but replacing an ignition coil typically costs $50-$150 for the part, plus labor if done by a mechanic.
Could a bad spark plug cause the P0353 code on a 2011 Ford Fusion?
Yes, a bad spark plug can create excessive resistance in the circuit, which could trigger the P0353 code.
What tools do I need to fix the P0353 code on a 2011 Ford Fusion?
You may need a multimeter, an OBDII scanner, basic hand tools, and possibly dielectric grease for reconnecting electrical components securely.
Discuss the causes and fixes for P0353 2011 Ford Fusion OBDII Code
Code P0353 2011 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.