Engine-Codes.com
Engine-Codes – Toyota – P0352 2010 Toyota Camry

P0352 2010 Toyota Camry Code - Ignition Coil 2 Primary/Secondary Circuit

Quick Answer

The P0352 diagnostic trouble code (DTC) for a 2010 Toyota Camry refers to an issue with the Ignition Coil 2 Primary/Secondary Circuit. Common causes include Faulty Ignition Coil: The ignition coil itself may be defective and need to be replaced, Wiring Issues: Damage to the wiring harness or connectors that connect to the ignition coil can cause circuit problems, ECM Malfunction: A malfunction in the Engine Control Module can disrupt the signals sent to the ignition coil. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0352 2010 Toyota Camry indicates Ignition Coil 2 Primary/Secondary Circuit.
Common causes
Common causes include Faulty Ignition Coil: The ignition coil itself may be defective and need to be replaced, Wiring Issues: Damage to the wiring harness or connectors that connect to the ignition coil can cause circuit problems, ECM Malfunction: A malfunction in the Engine Control Module can disrupt the signals sent to the ignition coil.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 15, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0352 2010 Toyota Camry Description

The P0352 diagnostic trouble code (DTC) for a 2010 Toyota Camry refers to an issue with the Ignition Coil 2 Primary/Secondary Circuit. This code indicates a problem with the electrical circuit that controls the ignition coil for cylinder 2 in the engine. The ignition coil is responsible for converting the low voltage from the battery into the high voltage needed to create a spark in the spark plugs, which ignites the air-fuel mixture in the combustion chamber.

OBDII Code P0352 2010 Toyota Camry - Ignition Coil 2 Primary/Secondary Circuit
P0352 2010 Toyota Camry Code - Ignition Coil 2 Primary/Secondary Circuit

Common Causes of P0352 2010 Toyota Camry

  1. Faulty Ignition Coil: The ignition coil itself may be defective and need to be replaced.
  2. Wiring Issues: Damage to the wiring harness or connectors that connect to the ignition coil can cause circuit problems.
  3. ECM Malfunction: A malfunction in the Engine Control Module can disrupt the signals sent to the ignition coil.
  4. Spark Plug Issues: Worn or fouled spark plugs can cause stress on the ignition coil, leading to failure.
  5. Environmental Factors: Exposure to moisture or extreme temperatures can also contribute to ignition coil failure.

Symptoms of P0352 2010 Toyota Camry

  1. Check Engine Light: The most common symptom associated with the P0352 code is the illumination of the Check Engine Light on the dashboard.
  2. Engine Misfires: Misfires in cylinder 2 can cause rough idling, shaking, and a lack of power during acceleration.
  3. Poor Fuel Efficiency: Ignition coil issues can lead to incomplete combustion, resulting in decreased fuel efficiency.
  4. Stalling: In severe cases, the engine may stall or have difficulty starting due to ignition coil problems.

How to Fix P0352 2010 Toyota Camry

  1. Diagnose the Issue: Use a scan tool to read the DTC and pinpoint the specific problem with the Ignition Coil 2 Primary/Secondary Circuit.
  2. Inspect Wiring: Check the wiring harness and connectors for any damage or corrosion. Repair or replace as needed.
  3. Test Ignition Coil: Test the ignition coil for proper function using a multimeter. Replace if faulty.
  4. Check Spark Plugs: Inspect the spark plugs for wear or fouling. Replace if necessary.
  5. Clear Codes: After making repairs, clear the DTC and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P0352 2010 Toyota Camry

The cost of repairing the Ignition Coil 2 Primary/Secondary Circuit issue can vary depending on the specific cause of the problem and the labor rates in your area. In general, the cost of replacing an ignition coil can range from $100 to $300, including parts and labor. Additional costs may be incurred if wiring repairs or ECM replacement are necessary. It's recommended to consult with a trusted mechanic or auto repair shop to get an accurate estimate based on your vehicle's make and model. Keep in mind that labor rates can vary, with hourly rates typically ranging from $80 to $150.

When is the Code Detected?

Each ignition circuit is continuously monitored by the Engine Control Module (ECM). The test fails when the ECM does not receive a valid pulse signal from the ignition coil.

Need more information about the P0352 2010 Toyota Camry code?

Need more information on how to fix the P0352 2010 Toyota Camry code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0352 2010 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0352 2010 Toyota Camry Code

1. What does the OBDII code P0352 mean on a 2010 Toyota Camry?

P0352 indicates a malfunction in the ignition coil circuit for cylinder 2, specifically in the primary or secondary wiring.

2. What are the symptoms of the P0352 code in a 2010 Toyota Camry?

Symptoms may include engine misfires, rough idling, reduced fuel efficiency, difficulty starting, or the Check Engine Light illuminating.

3. What causes the P0352 code on a Toyota Camry?

Common causes include a faulty ignition coil, damaged wiring or connectors in the ignition circuit, a malfunctioning powertrain control module (PCM), or issues with spark plugs.

4. Can I drive my 2010 Toyota Camry with the P0352 code?

While the car may still run, driving with this code can cause further damage to the engine or catalytic converter due to misfires. It’s best to address it promptly.

5. How do I diagnose the P0352 code on my Toyota Camry?

Start by inspecting the ignition coil and its wiring for damage or corrosion. Use a multimeter to check for proper voltage and continuity, and consider swapping the coil with another cylinder to see if the issue moves.

6. How do I fix the P0352 code on a 2010 Toyota Camry?

Repairs may involve replacing the ignition coil for cylinder 2, repairing damaged wiring or connectors, replacing spark plugs, or reprogramming or replacing the PCM if necessary.

7. How much does it cost to fix the P0352 code on a Toyota Camry?

Replacing an ignition coil typically costs $50-$150 for parts, plus labor. Additional costs may apply if other components like spark plugs or the PCM need replacement.

8. Can a bad spark plug cause the P0352 code?

Yes, a bad spark plug can strain the ignition coil, triggering the P0352 code. Always inspect and replace spark plugs if they are worn or damaged.

9. Will clearing the P0352 code fix the issue?

Clearing the code will temporarily remove it from the system, but the underlying issue must be repaired, or the code will return.

10. How can I prevent the P0352 code from recurring?

Regular maintenance, including periodic checks of the ignition coils, spark plugs, and wiring, can help prevent this code from reoccurring.

Discuss the causes and fixes for P0352 2010 Toyota Camry OBDII Code

Submit a New Comment

Code P0352 2010 Toyota Camry comments

No comments found for this page.