P0352 2010 Ford Fusion Code - Ignition Coil 'B' Primary/Secondary Circuit
Quick Answer
The diagnostic trouble code P0352 for a 2010 Ford Fusion specifically refers to the Ignition Coil 'B' Primary/Secondary Circuit. Common causes include Faulty ignition coil, Damaged wiring or connectors in the ignition coil circuit, Corrosion or water intrusion in the ignition coil circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0352 2010 Ford Fusion indicates Ignition Coil 'B' Primary/Secondary Circuit .
- Common causes
- Common causes include Faulty ignition coil, Damaged wiring or connectors in the ignition coil circuit, Corrosion or water intrusion in the ignition coil circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0352 2010 Ford Fusion Description
The diagnostic trouble code P0352 for a 2010 Ford Fusion specifically refers to the Ignition Coil 'B' Primary/Secondary Circuit. This code indicates a problem with the electrical circuit that controls the ignition coil for cylinder 'B'. The ignition coil is responsible for converting the low voltage from the battery into the high voltage needed to create a spark in the spark plugs, which ignites the air-fuel mixture in the engine cylinders. If there is an issue with the ignition coil circuit, it can lead to misfires, rough idle, decreased fuel efficiency, and potentially even engine stalling.
Common Causes of P0352 2010 Ford Fusion
- Faulty ignition coil
- Damaged wiring or connectors in the ignition coil circuit
- Corrosion or water intrusion in the ignition coil circuit
- Issues with the powertrain control module (PCM)
- Mechanical damage to the ignition coil
Symptoms of P0352 2010 Ford Fusion
- Engine misfires
- Rough idle
- Decreased fuel efficiency
- Engine stalling
- Illumination of the check engine light
How to Fix P0352 2010 Ford Fusion
- Diagnose the specific issue by using a scanner to pinpoint the faulty ignition coil 'B'.
- Replace the faulty ignition coil with a new one.
- Inspect and repair any damaged wiring or connectors in the ignition coil circuit.
- Clear the trouble code and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0352 2010 Ford Fusion
The typical repair costs for addressing the P0352 code on a 2010 Ford Fusion can range from $100 to $300, depending on the specific cause of the issue and whether any additional parts or labor are needed. It's important to note that diagnosis time and labor rates at auto repair shops can vary, so it's recommended to check with local shops for a more accurate estimate.
When is the Code Detected?
Need more information about the P0352 2010 Ford Fusion code?
Need more information on how to fix the P0352 2010 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0352 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0352 2010 Ford Fusion Code
What does the OBD-II code P0352 mean on a 2010 Ford Fusion?
P0352 indicates a malfunction in the primary or secondary circuit of Ignition Coil 'B,' which is typically responsible for creating the spark necessary for engine combustion.
What are the common symptoms of code P0352 on a 2010 Ford Fusion?
Symptoms may include engine misfires, rough idling, reduced acceleration, poor fuel economy, and the Check Engine Light illuminating.
What causes the P0352 code on a 2010 Ford Fusion?
Possible causes include a faulty ignition coil, damaged wiring or connectors, a malfunctioning PCM (Powertrain Control Module), or issues with the coil circuit.
How do you diagnose the P0352 code on a 2010 Ford Fusion?
Diagnosis typically involves inspecting the ignition coil, checking the wiring and connectors for damage, and testing the coil circuit for continuity or resistance using a multimeter.
Can you drive with code P0352 on a 2010 Ford Fusion?
While the car may still be drivable, driving with this code can lead to engine damage, reduced performance, and poor fuel efficiency. It’s best to address the issue promptly.
How do you fix the P0352 code on a 2010 Ford Fusion?
Repairs may include replacing the ignition coil, repairing damaged wiring or connectors, or updating/replacing the PCM if necessary.
How much does it cost to fix code P0352 on a 2010 Ford Fusion?
Repair costs vary, but replacing an ignition coil typically costs between $150 and $300, while wiring repairs or PCM replacement may cost more depending on labor and parts.
What tools are needed to fix the P0352 code?
Common tools include a multimeter for testing circuits, basic hand tools for removing components, and an OBD-II scanner to clear the code after repairs.
What is Ignition Coil ‘B’ in a 2010 Ford Fusion?
Ignition Coil 'B' refers to the second coil in the ignition system, which is linked to a specific cylinder. Its exact location depends on the engine configuration.
Will clearing the code fix the P0352 issue on a 2010 Ford Fusion?
Clearing the code alone won’t fix the underlying issue. The root cause, such as a faulty coil or damaged wiring, must be repaired to prevent the code from returning.
Discuss the causes and fixes for P0352 2010 Ford Fusion OBDII Code
Code P0352 2010 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.