P0352 2007 Scion xB Code - Ignition Coil 2 Primary/Secondary Circuit
Quick Answer
The P0352 code on a 2007 Scion xB indicates a problem with the ignition coil 2 primary/secondary circuit. Common causes include Faulty ignition coil, Damaged wiring or connectors in the ignition coil circuit, ECM malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0352 2007 Scion xB indicates Ignition Coil 2 Primary/Secondary Circuit.
- Common causes
- Common causes include Faulty ignition coil, Damaged wiring or connectors in the ignition coil circuit, ECM malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0352 2007 Scion xB Description
The P0352 code on a 2007 Scion xB indicates a problem with the ignition coil 2 primary/secondary circuit. The ignition coil is a crucial component in the vehicle's ignition system, responsible for converting the low voltage from the battery into the high voltage needed to ignite the fuel and air mixture in the engine cylinders. The primary circuit controls the power supply to the ignition coil, while the secondary circuit is responsible for delivering the high voltage spark to the spark plugs.
Common Causes of P0352 2007 Scion xB
- Faulty ignition coil
- Damaged wiring or connectors in the ignition coil circuit
- ECM malfunction
- Spark plug issues
- Poor electrical connections
Symptoms of P0352 2007 Scion xB
- Engine misfires
- Rough idling
- Difficulty starting the engine
- Loss of power
- Decreased fuel efficiency
How to Fix P0352 2007 Scion xB
- Diagnose the exact cause of the issue by using a scan tool to retrieve the trouble codes and inspecting the ignition coil, wiring, and connectors.
- Replace the faulty ignition coil if needed.
- Repair or replace any damaged wiring or connectors in the ignition coil circuit.
- Test the system after repairs to ensure the issue has been resolved.
- Clear the trouble codes and reset the ECM.
Cost to Fix P0352 2007 Scion xB
The cost of repairing a P0352 code on a 2007 Scion xB can vary depending on the exact cause of the issue. Typically, the cost of replacing an ignition coil can range from $100 to $300, including parts and labor. Additional costs may apply if there are wiring or connector issues that need to be addressed. It is recommended to consult with a mechanic to get an accurate estimate based on the specific circumstances of the vehicle. Keep in mind that labor rates can vary, so it's advisable to check with local auto repair shops for pricing.
When is the Code Detected?
Need more information about the P0352 2007 Scion xB code?
Need more information on how to fix the P0352 2007 Scion xB code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0352 2007 Scion xB code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0352 2007 Scion xB Code
1. What does the OBDII code P0352 mean on a 2007 Scion xB?
P0352 indicates a malfunction in the ignition coil 2 primary or secondary circuit, which may affect the vehicle's ability to generate a proper spark.
2. What are the common symptoms of code P0352 in a 2007 Scion xB?
Symptoms include engine misfires, rough idling, reduced engine performance, poor fuel economy, and the Check Engine Light turning on.
3. What causes the P0352 code to appear in a 2007 Scion xB?
Common causes include a faulty ignition coil, damaged wiring or connectors, a defective spark plug, or a malfunctioning engine control module (ECM).
4. Can I drive my 2007 Scion xB with a P0352 code?
It’s not recommended to drive for long periods with this code, as misfires can cause engine damage and increase emissions.
5. How do I diagnose the P0352 code on a 2007 Scion xB?
Start by checking ignition coil 2 and its wiring for damage or loose connections. Use a multimeter to test the coil's resistance and inspect the spark plug for wear.
6. What is the most common fix for the P0352 code in a 2007 Scion xB?
The most common fix is replacing the faulty ignition coil 2, but other repairs may include fixing damaged wiring or replacing the spark plug.
7. How much does it cost to repair the P0352 code on a 2007 Scion xB?
Replacing an ignition coil typically costs $100-$300, depending on labor rates and parts pricing.
8. Can a bad spark plug cause the P0352 code in a 2007 Scion xB?
Yes, a worn or damaged spark plug can strain the ignition coil, potentially triggering the P0352 code.
9. How can I prevent the P0352 code from returning in my 2007 Scion xB?
Regular maintenance, such as timely spark plug and ignition coil replacements, and inspecting wiring for damage, can help prevent this code.
10. Will clearing the P0352 code with a scanner fix the issue in my 2007 Scion xB?
Clearing the code won’t fix the underlying problem. The issue must be diagnosed and repaired to prevent the code from returning.
Discuss the causes and fixes for P0352 2007 Scion xB OBDII Code
Code P0352 2007 Scion xB comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.