P0351 2011 Ford Fusion Code - Ignition Coil 'A' Primary/Secondary Circuit
Quick Answer
The P0351 code for a 2011 Ford Fusion indicates a problem with the ignition coil 'A' primary/secondary circuit. Common causes include Faulty ignition coil 'A', Damaged wiring or connections, Issues with the powertrain control module (PCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0351 2011 Ford Fusion indicates Ignition Coil 'A' Primary/Secondary Circuit .
- Common causes
- Common causes include Faulty ignition coil 'A', Damaged wiring or connections, Issues with the powertrain control module (PCM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0351 2011 Ford Fusion Description
The P0351 code for a 2011 Ford Fusion indicates a problem with the ignition coil 'A' primary/secondary circuit. The ignition coil is a crucial component of the ignition system, responsible for converting the low voltage from the battery into the high voltage needed to ignite the fuel-air mixture in the engine cylinders. The primary circuit of the ignition coil supplies power to the coil, while the secondary circuit delivers the high voltage spark to the spark plugs.
Common Causes of P0351 2011 Ford Fusion
- Faulty ignition coil 'A'
- Damaged wiring or connections
- Issues with the powertrain control module (PCM)
- Faulty spark plugs or spark plug wires
- Corrosion in the ignition coil circuit
Symptoms of P0351 2011 Ford Fusion
- Engine misfires
- Rough idling
- Decreased fuel efficiency
- Engine stalling
- Illuminated check engine light
How to Fix P0351 2011 Ford Fusion
- Diagnose the issue by using an OBD-II scanner to confirm the P0351 code and check for any other related codes.
- Inspect the ignition coil 'A' and its wiring connections for any visible damage or corrosion.
- Test the ignition coil using a multimeter to ensure it is functioning properly.
- Replace the faulty ignition coil 'A' if needed, making sure to install the new coil correctly and secure all connections.
- Clear the diagnostic trouble codes and test drive the vehicle to verify that the issue has been resolved.
Cost to Fix P0351 2011 Ford Fusion
The typical repair costs for addressing the P0351 code on a 2011 Ford Fusion may range from $150 to $350, including parts and labor. This estimate can vary depending on the specific cause of the issue, the quality of the replacement parts used, and the labor rates at the auto repair shop. It is advisable to consult with a professional mechanic to get a more accurate estimate based on your location and vehicle details. Remember that diagnosis time and labor rates can vary, so it's essential to inquire about these factors before proceeding with the repair.
When is the Code Detected?
Need more information about the P0351 2011 Ford Fusion code?
Need more information on how to fix the P0351 2011 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0351 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0351 2011 Ford Fusion Code
1. What does the OBDII code P0351 mean for a 2011 Ford Fusion?
P0351 indicates a malfunction in the ignition coil "A" primary or secondary circuit, meaning there’s an issue with the coil or its wiring.
2. What are the symptoms of code P0351 in a 2011 Ford Fusion?
Common symptoms include engine misfires, rough idling, reduced power, poor fuel economy, and the Check Engine Light turning on.
3. What causes the P0351 code to appear in a 2011 Ford Fusion?
Possible causes include a faulty ignition coil, damaged wiring or connectors, a defective spark plug, or a malfunctioning powertrain control module (PCM).
4. How do I diagnose the P0351 code on a 2011 Ford Fusion?
Start by checking the ignition coil "A," inspecting its wiring and connectors for damage or corrosion. Then test the coil for proper resistance and ensure the PCM is sending the correct signals.
5. Can I drive my 2011 Ford Fusion with a P0351 code?
Driving with a P0351 code is not recommended as it can lead to engine misfires, reduced performance, and potential damage to the catalytic converter.
6. How do I fix the P0351 code on a 2011 Ford Fusion?
Repairs may include replacing the faulty ignition coil, repairing or replacing damaged wiring, checking and replacing spark plugs, or reprogramming or replacing the PCM if necessary.
7. How much does it cost to repair the P0351 code on a 2011 Ford Fusion?
Repair costs vary, but replacing an ignition coil typically costs $100–$200 for parts and labor, while more extensive PCM repairs can cost $500 or more.
8. Can a bad spark plug cause the P0351 code on a 2011 Ford Fusion?
Yes, a worn or damaged spark plug can affect the ignition coil’s performance and trigger the P0351 code.
9. Is the P0351 code specific to ignition coil "A"?
Yes, P0351 specifically refers to a problem with the circuit related to ignition coil "A," which is tied to a specific cylinder.
10. Will clearing the P0351 code fix the problem on a 2011 Ford Fusion?
Clearing the code will turn off the Check Engine Light temporarily, but the underlying issue must be addressed to prevent the code from returning.
Discuss the causes and fixes for P0351 2011 Ford Fusion OBDII Code
Code P0351 2011 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.