P0351 2008 Ford Fusion Code - Ignition Coil 'A' Primary/Secondary Circuit
Quick Answer
The P0351 code for a 2008 Ford Fusion indicates a problem with the Ignition Coil 'A' Primary/Secondary Circuit. Common causes include Faulty ignition coil, Damaged wiring or connectors in the ignition coil circuit, Issues with the powertrain control module (PCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0351 2008 Ford Fusion indicates Ignition Coil 'A' Primary/Secondary Circuit .
- Common causes
- Common causes include Faulty ignition coil, Damaged wiring or connectors in the ignition coil circuit, Issues with the powertrain control module (PCM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0351 2008 Ford Fusion Description
The P0351 code for a 2008 Ford Fusion indicates a problem with the Ignition Coil 'A' Primary/Secondary Circuit. This means that there is an issue with the electrical circuit that controls the ignition coil for cylinder 'A'. The ignition coil is responsible for converting the low voltage from the battery into the high voltage needed to create a spark in the spark plugs, which ignites the air-fuel mixture in the engine cylinders.
Common Causes of P0351 2008 Ford Fusion
- Faulty ignition coil
- Damaged wiring or connectors in the ignition coil circuit
- Issues with the powertrain control module (PCM)
- Corrosion or moisture in the electrical connections
- Overheating of the ignition coil
Symptoms of P0351 2008 Ford Fusion
- Engine misfires
- Rough idling
- Decreased fuel efficiency
- Engine stalling
- Illumination of the check engine light
How to Fix P0351 2008 Ford Fusion
- Diagnose the specific cause of the issue by using a scan tool to check for codes and performing a visual inspection of the ignition coil and related components.
- Test the ignition coil using a multimeter to check for proper resistance and continuity.
- Replace the faulty ignition coil if it is determined to be the cause of the problem.
- Inspect and repair any damaged wiring or connectors in the circuit.
- Clear the diagnostic trouble codes and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0351 2008 Ford Fusion
The typical repair costs for addressing the P0351 code on a 2008 Ford Fusion can range from $150 to $300, including parts and labor. However, the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It is advisable to check local rates for a more precise estimate. Keep in mind that rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less.
When is the Code Detected?
Need more information about the P0351 2008 Ford Fusion code?
Need more information on how to fix the P0351 2008 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0351 2008 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0351 2008 Ford Fusion Code
1. What does OBDII code P0351 on a 2008 Ford Fusion mean?
- It indicates a problem with the Ignition Coil 'A' Primary/Secondary Circuit.
2. What are common symptoms of P0351 in a 2008 Ford Fusion?
- Common symptoms include engine misfires, rough idling, loss of power, and illuminated Check Engine Light.
3. What are possible causes of the P0351 code in a 2008 Ford Fusion?
- The code can be triggered by a faulty ignition coil, wiring issues, a defective spark plug, or a faulty PCM.
4. How can I diagnose the cause of the P0351 code in my 2008 Ford Fusion?
- You can use a scan tool to check for any related codes, visually inspect the ignition coil and wiring, and perform a resistance test on the coil.
5. Can I still drive my 2008 Ford Fusion with the P0351 code?
- It is not recommended to drive the vehicle with the P0351 code as it can lead to further damage and poor performance.
6. How can I repair the P0351 code in my 2008 Ford Fusion?
- Repair options include replacing the faulty ignition coil, repairing any damaged wiring, replacing spark plugs, or addressing any PCM issues.
7. Is it possible to reset the P0351 code in a 2008 Ford Fusion?
- Yes, you can reset the code using a scan tool after addressing the underlying issue causing the code.
8. Are there any preventive maintenance tips to avoid the P0351 code in a 2008 Ford Fusion?
- Regularly inspecting and replacing spark plugs, checking ignition coils, and maintaining proper engine performance can help prevent this code.
9. Can a DIY enthusiast fix the P0351 code in a 2008 Ford Fusion?
- Depending on your experience and tools, you may be able to replace the ignition coil or spark plugs yourself. For complex issues, it's best to consult a professional.
10. How much does it typically cost to repair the P0351 code in a 2008 Ford Fusion?
- The cost can vary depending on the exact cause of the issue, but replacing an ignition coil can range from $100 to $300, including parts and labor.
Discuss the causes and fixes for P0351 2008 Ford Fusion OBDII Code
Code P0351 2008 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.