Engine-CodesToyota – P0347 2011 Toyota Camry

P0347 2011 Toyota Camry Code - Camshaft Position Sensor 'A' Circuit Low Input Bank 2

Quick Answer

The P0347 code for a 2011 Toyota Camry indicates a problem with the Camshaft Position Sensor 'A' Circuit Low Input Bank 2. Common causes include Faulty camshaft position sensor, Damaged wiring or connectors related to the sensor, Malfunctioning ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0347 2011 Toyota Camry indicates Camshaft Position Sensor 'A' Circuit Low Input Bank 2.
Common causes
Common causes include Faulty camshaft position sensor, Damaged wiring or connectors related to the sensor, Malfunctioning ECM.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 16, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0347 2011 Toyota Camry Description

The P0347 code for a 2011 Toyota Camry indicates a problem with the Camshaft Position Sensor 'A' Circuit Low Input Bank 2. The camshaft position sensor is a crucial component in the engine management system, responsible for monitoring the position of the camshaft and sending signals to the engine control module (ECM). This information is used to determine the precise timing of the fuel injection and ignition system.

OBDII Code P0347 2011 Toyota Camry - Camshaft Position Sensor 'A' Circuit Low Input Bank 2
P0347 2011 Toyota Camry Code - Camshaft Position Sensor 'A' Circuit Low Input Bank 2

Common Causes of P0347 2011 Toyota Camry

  1. Faulty camshaft position sensor
  2. Damaged wiring or connectors related to the sensor
  3. Malfunctioning ECM
  4. Issues with the camshaft itself, such as wear or damage
  5. Electrical problems within the sensor circuit

Symptoms of P0347 2011 Toyota Camry

  1. Engine misfires or rough idling
  2. Decreased fuel efficiency
  3. Engine stalling or hesitation during acceleration
  4. Illumination of the Check Engine Light
  5. Difficulty starting the engine

How to Fix P0347 2011 Toyota Camry

  1. Begin by diagnosing the specific cause of the low input signal from the camshaft position sensor using a diagnostic scanner.
  2. Inspect the sensor, wiring, and connectors for any visible damage or corrosion. Replace any damaged components.
  3. Test the sensor's voltage output and resistance to ensure it is functioning correctly. Replace the sensor if necessary.
  4. Clear the diagnostic trouble codes from the ECM and perform a test drive to verify that the issue has been resolved.
  5. If the problem persists, further diagnosis may be required to identify any underlying issues with the ECM or camshaft.

Cost to Fix P0347 2011 Toyota Camry

The typical repair costs for addressing a P0347 code on a 2011 Toyota Camry can vary depending on the specific cause of the issue. In general, replacing a faulty camshaft position sensor can cost between $50 to $200, while addressing wiring or connector issues may range from $100 to $300. Labor costs at auto repair shops typically range from $80 to $150 per hour, with total repair costs potentially amounting to $200 to $500 or more. It is advisable to consult with a professional mechanic to obtain a more accurate estimate based on the specific circumstances of the vehicle.

Tech Notes for P0347 2011 Toyota Camry

Sometimes and in some models, low battery voltage or a weak starter can trigger a Camshaft Position Sensor code.

When is the Code Detected?

The camshaft position sensor signal is sent the Engine Control Module(ECM) is too low

Need more information about the P0347 2011 Toyota Camry code?

Need more information on how to fix the P0347 2011 Toyota Camry code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0347 2011 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0347 2011 Toyota Camry Code

1. What does the OBDII code P0347 mean on a 2011 Toyota Camry?

P0347 indicates a "Camshaft Position Sensor 'A' Circuit Low Input" for Bank 2, meaning the signal from the camshaft position sensor is lower than expected.

2. What are the symptoms of code P0347 in a 2011 Toyota Camry?

Common symptoms include difficulty starting, reduced engine performance, rough idling, stalling, and the Check Engine Light turning on.

3. What causes the P0347 code in a 2011 Toyota Camry?

Possible causes include a faulty camshaft position sensor, damaged wiring or connectors, a failing ECM (engine control module), or a timing issue in Bank 2.

4. What is Bank 2 on a 2011 Toyota Camry?

Bank 2 refers to the side of the engine opposite Bank 1, which is determined by the position of cylinder 1. In a V6 Camry, Bank 2 typically contains cylinders 2, 4, and 6.

5. Can I drive my 2011 Toyota Camry with a P0347 code?

Driving with a P0347 code is not recommended, as it can cause poor engine performance and potentially lead to further damage if not addressed.

6. How can I fix the P0347 code on my 2011 Toyota Camry?

Start by inspecting the camshaft position sensor and its wiring for damage or loose connections. Replace the sensor if faulty, and repair any damaged wires or connectors.

7. How do I locate the camshaft position sensor for Bank 2 on a 2011 Toyota Camry?

The camshaft position sensor for Bank 2 is typically located near the cylinder head on the Bank 2 side of the engine. Consult your repair manual for precise location details.

8. What tools are needed to diagnose and repair the P0347 code?

You may need an OBDII scanner, multimeter, and basic hand tools to test the sensor, check wiring, and replace components if necessary.

9. Could a timing chain issue cause the P0347 code in a 2011 Toyota Camry?

Yes, a stretched or misaligned timing chain can cause incorrect camshaft timing, leading to a P0347 code.

10. How much does it cost to repair a P0347 code on a 2011 Toyota Camry?

The repair cost varies based on the issue. Replacing a camshaft position sensor typically costs $100-$300, while timing chain repairs can be significantly more expensive.

Discuss the causes and fixes for P0347 2011 Toyota Camry OBDII Code

Code P0347 2011 Toyota Camry comments

No comments found for this page.