P0347 2010 Toyota Camry Code - Camshaft Position Sensor 'A' Circuit Low Input Bank 2
Quick Answer
The diagnostic trouble code P0347 for a 2010 Toyota Camry indicates a problem with the Camshaft Position Sensor 'A' Circuit Low Input Bank 2. Common causes include Faulty camshaft position sensor, Wiring or connector issues in the camshaft position sensor circuit, Poor electrical connection or corrosion in the sensor circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0347 2010 Toyota Camry indicates Camshaft Position Sensor 'A' Circuit Low Input Bank 2.
- Common causes
- Common causes include Faulty camshaft position sensor, Wiring or connector issues in the camshaft position sensor circuit, Poor electrical connection or corrosion in the sensor circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0347 2010 Toyota Camry Description
The diagnostic trouble code P0347 for a 2010 Toyota Camry indicates a problem with the Camshaft Position Sensor 'A' Circuit Low Input Bank 2. The camshaft position sensor is a crucial component in the engine management system, responsible for monitoring the position of the camshaft and sending this information to the engine control module (ECM). The ECM uses this data to determine the precise timing of fuel injection and ignition, ensuring optimal engine performance and efficiency.
Common Causes of P0347 2010 Toyota Camry
- Faulty camshaft position sensor.
- Wiring or connector issues in the camshaft position sensor circuit.
- Poor electrical connection or corrosion in the sensor circuit.
- Engine timing belt or chain issues affecting camshaft position.
- ECM software or hardware malfunction.
Symptoms of P0347 2010 Toyota Camry
- Check Engine Light illuminated on the dashboard.
- Engine misfires or runs rough.
- Difficulty starting the engine.
- Reduced fuel efficiency.
- Engine stalling or hesitation during acceleration.
How to Fix P0347 2010 Toyota Camry
- Begin by diagnosing the camshaft position sensor using a scan tool to confirm the P0347 code and check for any related codes.
- Inspect the wiring and connectors associated with the camshaft position sensor for any damage, corrosion, or loose connections. Repair or replace as necessary.
- Test the camshaft position sensor using a multimeter to ensure it is functioning correctly. Replace the sensor if it is faulty.
- Clear the diagnostic trouble codes from the ECM and road test the vehicle to verify that the issue has been resolved.
- If the problem persists, further diagnostics may be required to identify any underlying issues with the engine timing or ECM.
Cost to Fix P0347 2010 Toyota Camry
The typical repair costs for addressing the P0347 code on a 2010 Toyota Camry can vary depending on the specific cause of the issue. In general, the cost of replacing a camshaft position sensor ranges from $50 to $200, depending on the quality and brand of the sensor. Labor costs for this repair can range from $100 to $200, with total repair costs typically falling between $150 and $400. It is important to note that these estimates are approximate, and actual costs may vary based on factors such as location, labor rates, and any additional parts or repairs needed. It is recommended to consult with a qualified mechanic or auto repair shop for a more accurate cost estimate based on the specific circumstances of the vehicle.
Tech Notes for P0347 2010 Toyota Camry
When is the Code Detected?
Need more information about the P0347 2010 Toyota Camry code?
Need more information on how to fix the P0347 2010 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0347 2010 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0347 2010 Toyota Camry Code
What does the OBDII code P0347 mean on a 2010 Toyota Camry?
The P0347 code indicates a "Camshaft Position Sensor 'A' Circuit Low Input" on Bank 2, meaning the ECM is detecting a weak or no signal from the camshaft position sensor.
What are the symptoms of P0347 in a 2010 Toyota Camry?
Symptoms include engine misfires, rough idling, reduced power, difficulty starting, poor fuel economy, and potentially the engine stalling.
What causes the P0347 code to appear?
Common causes include a faulty camshaft position sensor, damaged or corroded wiring, a poor electrical connection, a failed ECM, or a timing issue such as a stretched timing chain.
Which sensor does P0347 refer to?
P0347 refers to the camshaft position sensor 'A' on Bank 2, which monitors the camshaft's position and timing on the side of the engine opposite Bank 1.
How can I diagnose the P0347 code on my 2010 Toyota Camry?
Start by checking the sensor wiring for damage or corrosion, test the camshaft position sensor with a multimeter, and inspect the timing components for misalignment.
Can I drive my 2010 Toyota Camry with the P0347 code?
Driving with P0347 is not recommended as it can cause poor engine performance, increased emissions, and potential damage to internal engine components.
How do I fix the P0347 error code?
Repairs may involve replacing the camshaft position sensor, repairing or replacing damaged wiring, cleaning electrical connections, or addressing timing chain issues if necessary.
Is the camshaft position sensor for P0347 on Bank 2 hard to replace?
The difficulty depends on its location, but it is generally accessible with basic tools. Consult the vehicle's repair manual for step-by-step guidance.
What tools are needed to repair a P0347 issue?
You'll need a diagnostic scanner, multimeter, basic hand tools (like sockets and ratchets), and possibly a repair manual for your vehicle.
How much does it cost to fix the P0347 code on a 2010 Toyota Camry?
Costs vary depending on the repair; replacing the camshaft position sensor can cost $100-$300, while fixing wiring or timing issues may be more expensive.
Discuss the causes and fixes for P0347 2010 Toyota Camry OBDII Code
Code P0347 2010 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.