Engine-Codes.com
Engine-Codes – RAM – P0345 RAM

P0345 RAM Code - Camshaft Position Sensor Circuit Bank 2 Sensor 1

Quick Answer

The diagnostic trouble code P0345 indicates a problem with the camshaft position sensor circuit for bank 2 sensor 1. Common causes include Faulty Sensor: The camshaft position sensor itself may be malfunctioning, causing inaccurate readings, Wiring Issues: Damaged or corroded wiring connections can disrupt the signal between the sensor and the ECM, ECM Failure: A faulty engine control module can also trigger this code by not receiving the correct data from the sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0345 RAM indicates Camshaft Position Sensor Circuit Bank 2 Sensor 1.
Common causes
Common causes include Faulty Sensor: The camshaft position sensor itself may be malfunctioning, causing inaccurate readings, Wiring Issues: Damaged or corroded wiring connections can disrupt the signal between the sensor and the ECM, ECM Failure: A faulty engine control module can also trigger this code by not receiving the correct data from the sensor.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 12, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0345 RAM Description

The diagnostic trouble code P0345 indicates a problem with the camshaft position sensor circuit for bank 2 sensor 1. This sensor is responsible for monitoring the position of the camshaft in relation to the crankshaft, allowing the engine control module (ECM) to determine the optimal timing for fuel injection and ignition. Bank 2 typically refers to the side of the engine that does not contain cylinder 1, while sensor 1 indicates the first sensor in that bank.

OBDII Code P0345 RAM - Camshaft Position Sensor Circuit Bank 2 Sensor 1
P0345 RAM Code - Camshaft Position Sensor Circuit Bank 2 Sensor 1

Common Causes of P0345 RAM

  1. Faulty Sensor: The camshaft position sensor itself may be malfunctioning, causing inaccurate readings.
  2. Wiring Issues: Damaged or corroded wiring connections can disrupt the signal between the sensor and the ECM.
  3. ECM Failure: A faulty engine control module can also trigger this code by not receiving the correct data from the sensor.
  4. Timing Chain/Belt Issues: Problems with the timing chain or belt can also impact the camshaft position sensor's readings, leading to this code.
  5. Mechanical Issues: Any physical damage to the sensor or its components can cause it to malfunction, triggering the code.

Symptoms of P0345 RAM

  1. Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the dashboard.
  2. Engine Misfires: A malfunctioning camshaft position sensor can lead to misfires, rough idling, and overall poor engine performance.
  3. Engine Stalling: In some cases, the engine may stall or have difficulty starting due to incorrect timing.
  4. Reduced Fuel Efficiency: A faulty camshaft position sensor can cause the engine to run inefficiently, resulting in decreased fuel economy.
  5. Decreased Power: The engine may experience a loss of power or acceleration due to the sensor issue affecting performance.

How to Fix P0345 RAM

  1. Diagnose the Issue: Use a scan tool to retrieve the specific trouble code and perform a visual inspection of the camshaft position sensor and its wiring.
  2. Replace the Sensor: If the sensor is determined to be faulty, it will need to be replaced with a new one.
  3. Repair Wiring: Address any damaged or corroded wiring connections to ensure a proper signal between the sensor and ECM.
  4. Check Timing Components: Inspect the timing chain or belt for any issues that may be affecting the camshaft position sensor's readings.
  5. Clear Codes and Test Drive: Once the repair is completed, clear the trouble codes from the ECM and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P0345 RAM

The cost of repairing a camshaft position sensor circuit issue can vary depending on the make and model of the vehicle, the location of the repair shop, and the extent of the problem. Typically, the cost of parts for a new camshaft position sensor ranges from $50 to $200, while labor costs can be between $100 and $200. In total, the repair may cost between $150 and $400, excluding any additional diagnostic fees or taxes.

What does this mean?

Tech Notes for P0345 RAM

In the event of a failure in either the Crankshaft Position (CKP) Sensor or Camshaft Position (CMP) Sensor, the engine can still start. The Powertrain Control Module (PCM) is capable of determining the engine position and initiating startup based on one of these two inputs. However, there may be a small delay in starting as the PCM needs time to establish synchronization. If either the CKP or CMP Sensor signals are absent during engine cranking, a Diagnostic Trouble Code (DTC) is recorded, and the Malfunction Indicator Lamp (MIL) lights up.

Need more information about the P0345 RAM code?

Need more information on how to fix the P0345 RAM code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0345 RAM code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0345 RAM Code

1. What does OBDII code P0345 mean on a RAM vehicle?

P0345 indicates a malfunction in the Camshaft Position Sensor Circuit for Bank 2 Sensor 1, which affects the engine's timing and performance.

2. What are the common symptoms of code P0345 in a RAM?

Symptoms include engine misfires, rough idling, poor acceleration, reduced fuel efficiency, and difficulty starting the engine.

3. What causes the P0345 code on a RAM?

Common causes include a faulty camshaft position sensor, damaged wiring or connectors, issues with the timing chain or belt, or a failing PCM (Powertrain Control Module).

4. How do I know if the camshaft position sensor is faulty in my RAM?

A faulty sensor often causes intermittent stalling, trouble starting, and the P0345 code. It can be confirmed with a multimeter or diagnostic tool.

5. Can I drive my RAM with a P0345 code?

Driving with a P0345 code is not recommended, as it can lead to poor engine performance, increased emissions, and potential engine damage.

6. How do I fix the P0345 code on my RAM?

Inspect and repair or replace damaged wiring, connectors, or the Bank 2 Sensor 1 camshaft position sensor. If needed, check the timing chain or belt and the PCM.

7. Where is Bank 2 Sensor 1 located on a RAM?

Bank 2 refers to the side of the engine opposite Bank 1, and Sensor 1 is typically located near the camshaft on that side.

8. What tools do I need to diagnose and fix a P0345 code?

You’ll need an OBDII scanner, multimeter, and basic hand tools to diagnose and repair wiring, connectors, or the sensor itself.

9. Could a bad crankshaft position sensor cause the P0345 code in a RAM?

Yes, a failing crankshaft position sensor can sometimes trigger the P0345 code, as the ECM relies on both sensors for timing data.

10. How much does it cost to fix a P0345 code on a RAM?

Repair costs vary but typically range from $100 to $250, depending on whether the camshaft position sensor, wiring, or other components need replacement.

Discuss the causes and fixes for P0345 RAM OBDII Code

Submit a New Comment

Code P0345 RAM comments

No comments found for this page.