P0345 Dodge Code - Camshaft Position Sensor Circuit Bank 2 Sensor 1
Quick Answer
The P0345 diagnostic trouble code (DTC) for Dodge vehicles specifically refers to the Camshaft Position Sensor Circuit Bank 2 Sensor 1. Common causes include Faulty camshaft position sensor, Wiring or connector issues in the sensor circuit, ECM software malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0345 Dodge indicates Camshaft Position Sensor Circuit Bank 2 Sensor 1.
- Common causes
- Common causes include Faulty camshaft position sensor, Wiring or connector issues in the sensor circuit, ECM software malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0345 Dodge Description
The P0345 diagnostic trouble code (DTC) for Dodge vehicles specifically refers to the Camshaft Position Sensor Circuit Bank 2 Sensor 1. This code indicates that there is a problem with the camshaft position sensor circuit in the engine's bank 2, which is typically associated with the side of the engine where the number 2 cylinder is located. The camshaft position sensor plays a crucial role in the engine's operation by monitoring the position of the camshaft and sending this information to the engine control module (ECM) for proper timing of fuel injection and ignition.
Common Causes of P0345 Dodge
- Faulty camshaft position sensor
- Wiring or connector issues in the sensor circuit
- ECM software malfunction
- Mechanical engine problems affecting camshaft position
- Timing belt or chain issues
Symptoms of P0345 Dodge
- Engine misfires or runs roughly
- Decreased fuel efficiency
- Engine stalling or difficulty starting
- Rough idling or vibrations
- Check Engine Light illuminated on the dashboard
How to Fix P0345 Dodge
- Perform a visual inspection of the camshaft position sensor, wiring, and connectors for any visible damage or corrosion.
- Test the camshaft position sensor using a multimeter to check for proper voltage and signal output.
- Replace the camshaft position sensor if it is found to be faulty.
- Check and repair any damaged wiring or connectors in the sensor circuit.
- Clear the DTC with a scan tool and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0345 Dodge
The cost of repairing a P0345 DTC can vary depending on the specific cause of the issue and the labor rates in your area. Generally, the cost of a new camshaft position sensor can range from $50 to $150, depending on the brand and quality. Labor costs for this repair typically range from $100 to $200, but this can vary based on the shop's hourly rates and the complexity of the repair. It's advisable to contact local auto repair shops for more accurate pricing information based on your vehicle's make and model.
Tech Notes for P0345 Dodge
Need more information about the P0345 Dodge code?
Need more information on how to fix the P0345 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0345 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0345 Dodge Code
What does the OBDII code P0345 mean in a Dodge vehicle?
P0345 indicates an issue with the camshaft position sensor circuit for Bank 2, Sensor 1. It means the signal from this sensor is either missing or out of range.
What are the common symptoms of a P0345 code in a Dodge?
Symptoms may include poor engine performance, rough idling, hard starting, stalling, reduced fuel efficiency, or the Check Engine Light turning on.
What causes the P0345 code to appear in a Dodge?
Common causes include a faulty camshaft position sensor, damaged wiring or connectors, a failed crankshaft position sensor, issues with the timing chain or belt, or a malfunctioning PCM (Powertrain Control Module).
Can I drive my Dodge with a P0345 code?
While it may still be drivable, operating the vehicle with this code can lead to poor performance, potential stalling, and further engine damage. It’s best to address the issue promptly.
How do I diagnose the P0345 code in a Dodge?
Start by scanning the vehicle with an OBDII scanner, visually inspecting the wiring and connectors for damage, testing the camshaft position sensor with a multimeter, and checking the timing components.
How do I fix the P0345 code in a Dodge?
Repairs may involve replacing the camshaft position sensor, repairing damaged wiring or connectors, inspecting and fixing timing chain issues, or reprogramming or replacing the PCM if necessary.
What is Bank 2, Sensor 1 in relation to P0345?
Bank 2 refers to the side of the engine opposite Bank 1 (usually the side without cylinder 1), and Sensor 1 is the camshaft position sensor on that bank.
How much does it cost to repair a P0345 code in a Dodge?
The cost varies depending on the issue. Replacing a camshaft position sensor typically costs $100–$300, while more complex repairs like timing system work or PCM replacement can be significantly higher.
Could a bad crankshaft position sensor cause a P0345 code in a Dodge?
Yes, a faulty crankshaft position sensor can affect the camshaft position sensor's operation, as the two sensors work together to monitor engine timing.
Will clearing the P0345 code solve the problem?
Clearing the code may turn off the Check Engine Light temporarily, but unless the underlying issue is resolved, the code will likely return.
Discuss the causes and fixes for P0345 Dodge OBDII Code
Code P0345 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.