Engine-Codes.com
Engine-Codes – Toyota – P0345 2011 Toyota Camry

P0345 2011 Toyota Camry Code - Camshaft Position Sensor 'A' Circuit Bank 2

Quick Answer

The diagnostic trouble code P0345 for a 2011 Toyota Camry indicates a problem with the Camshaft Position Sensor 'A' Circuit Bank 2. Common causes include Faulty camshaft position sensor, Damaged wiring or connectors in the sensor circuit, Issues with the sensor's reluctor ring. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0345 2011 Toyota Camry indicates Camshaft Position Sensor 'A' Circuit Bank 2.
Common causes
Common causes include Faulty camshaft position sensor, Damaged wiring or connectors in the sensor circuit, Issues with the sensor's reluctor ring.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 10, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0345 2011 Toyota Camry Description

The diagnostic trouble code P0345 for a 2011 Toyota Camry indicates a problem with the Camshaft Position Sensor 'A' Circuit Bank 2. The camshaft position sensor is responsible for monitoring the position of the camshaft in relation to the crankshaft, which helps the engine control module (ECM) determine the optimal timing for fuel injection and ignition. In this case, the code specifically refers to an issue with the circuit on bank 2 of the engine, which could be caused by a variety of factors.

OBDII Code P0345 2011 Toyota Camry - Camshaft Position Sensor 'A' Circuit Bank 2
P0345 2011 Toyota Camry Code - Camshaft Position Sensor 'A' Circuit Bank 2

Common Causes of P0345 2011 Toyota Camry

  1. Faulty camshaft position sensor
  2. Damaged wiring or connectors in the sensor circuit
  3. Issues with the sensor's reluctor ring
  4. ECM malfunctions
  5. Mechanical issues with the camshaft itself

Symptoms of P0345 2011 Toyota Camry

  1. Rough idling or engine misfires
  2. Reduced fuel efficiency
  3. Difficulty starting the vehicle
  4. Engine stalling
  5. Illuminated check engine light

How to Fix P0345 2011 Toyota Camry

  1. Begin by diagnosing the specific cause of the P0345 code using a diagnostic scan tool to verify the sensor's functionality and inspect the wiring and connectors for any damage.
  2. If the camshaft position sensor is faulty, replace it with a new, OEM-quality sensor to ensure accurate readings and proper engine timing.
  3. Repair any damaged wiring or connectors in the sensor circuit to restore proper electrical connections.
  4. Check and clean the sensor's reluctor ring to ensure it spins freely and provides accurate data to the ECM.
  5. Clear the diagnostic trouble code from the ECM memory and test drive the vehicle to confirm that the issue has been resolved.

Cost to Fix P0345 2011 Toyota Camry

The typical repair costs for addressing the P0345 code on a 2011 Toyota Camry can range from $100 to $300, depending on the specific cause of the issue and the cost of parts and labor. It's essential to note that diagnosis time and labor rates at auto repair shops can vary significantly based on location, vehicle make and model, and engine type. Rates typically range between $80 and $150 per hour, but may be higher at dealerships or in metropolitan areas, while independent shops often charge less. For a more precise estimate, it's advisable to inquire about local rates before proceeding with the repair.

What does this mean?

Tech Notes for P0345 2011 Toyota Camry

Sometimes and in some models, low battery voltage or a weak starter can trigger a Camshaft Position Sensor code.

When is the Code Detected?

The camshaft position sensor signal is not detected by the Engine Control Module(ECM) during the first few seconds of engine cranking

Need more information about the P0345 2011 Toyota Camry code?

Need more information on how to fix the P0345 2011 Toyota Camry code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0345 2011 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0345 2011 Toyota Camry Code

1. What does the OBDII code P0345 mean on a 2011 Toyota Camry?

The P0345 code indicates an issue with the Camshaft Position Sensor 'A' Circuit on Bank 2, which means the sensor is not sending the correct signal to the engine control module (ECM).

2. What are the common symptoms of a P0345 code on a 2011 Toyota Camry?

Symptoms may include engine stalling, poor acceleration, rough idling, difficulty starting, or the Check Engine Light illuminating.

3. What causes the P0345 code to appear on a 2011 Toyota Camry?

Potential causes include a faulty camshaft position sensor, damaged wiring or connectors, a timing chain or belt issue, or a malfunctioning ECM.

4. How do I identify Bank 2 on my 2011 Toyota Camry?

Bank 2 refers to the side of the engine that does not contain cylinder 1, typically the side opposite Bank 1 in a V6 engine.

5. Can I drive my 2011 Toyota Camry with a P0345 code?

It’s not recommended to drive with this code, as it can lead to poor performance, stalling, or potential engine damage.

6. How do I fix the P0345 code on a 2011 Toyota Camry?

Start by inspecting the camshaft position sensor, wiring, and connectors for damage. Replace the sensor if necessary, or repair any damaged wiring. If the issue persists, further diagnostics may be needed.

7. How much does it cost to fix a P0345 code on a 2011 Toyota Camry?

The cost to replace a camshaft position sensor typically ranges from $100 to $300, including parts and labor. Additional repairs may increase the cost.

8. Can a bad battery cause the P0345 code on a 2011 Toyota Camry?

Yes, a weak or faulty battery can cause voltage issues that may trigger the P0345 code due to improper sensor signals.

9. What tools are needed to diagnose the P0345 code on a 2011 Toyota Camry?

You’ll need an OBDII scanner, a multimeter to check wiring continuity, and potentially a repair manual for your vehicle.

10. Will clearing the P0345 code fix the problem on a 2011 Toyota Camry?

Clearing the code may temporarily turn off the Check Engine Light, but it won’t fix the underlying issue. Proper diagnostics and repairs are required to resolve the problem.

Discuss the causes and fixes for P0345 2011 Toyota Camry OBDII Code

Submit a New Comment

Code P0345 2011 Toyota Camry comments

No comments found for this page.