P0339 Honda Code - Crankshaft Position Sensor Circuit Intermittent Interruption
Quick Answer
The P0339 diagnostic trouble code (DTC) for Honda vehicles indicates a Crankshaft Position Sensor Circuit Intermittent Interruption. Common causes include Faulty crankshaft position sensor, Wiring or connector issues in the sensor circuit, Damaged or corroded sensor connections. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0339 Honda indicates Crankshaft Position Sensor Circuit Intermittent Interruption.
- Common causes
- Common causes include Faulty crankshaft position sensor, Wiring or connector issues in the sensor circuit, Damaged or corroded sensor connections.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0339 Honda Description
The P0339 diagnostic trouble code (DTC) for Honda vehicles indicates a Crankshaft Position Sensor Circuit Intermittent Interruption. The crankshaft position sensor is a crucial component that monitors the rotation speed and position of the crankshaft in the engine. This information is used by the engine control module (ECM) to determine ignition timing and fuel injection timing. When this sensor experiences intermittent interruptions in its signal transmission, it can lead to issues with engine performance, fuel efficiency, and overall drivability of the vehicle.
Common Causes of P0339 Honda
- Faulty crankshaft position sensor
- Wiring or connector issues in the sensor circuit
- Damaged or corroded sensor connections
- Electrical interference or signal loss
- ECM software or hardware problems
Symptoms of P0339 Honda
- Engine stalling or rough idling
- Difficulty starting the engine
- Decreased fuel efficiency
- Engine misfires
- Illumination of the check engine light
How to Fix P0339 Honda
- Begin by diagnosing the code using a scan tool to confirm the issue.
- Inspect the wiring and connectors associated with the crankshaft position sensor for any damage or corrosion.
- Test the crankshaft position sensor using a multimeter to check for proper resistance and signal output.
- If the sensor is faulty, replace it with a new OEM or high-quality aftermarket sensor.
- Clear the DTC and perform a test drive to ensure the issue has been resolved.
Cost to Fix P0339 Honda
The typical repair costs for addressing a P0339 code on a Honda vehicle can range from $150 to $400, including parts and labor. However, it's essential to note that actual costs can vary depending on the specific diagnosis time required, labor rates at the auto repair shop, and the quality of parts used. It's advisable to obtain quotes from different shops and compare prices before proceeding with the repair.
Tech Notes for P0339 Honda
Need more information about the P0339 Honda code?
Need more information on how to fix the P0339 Honda code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0339 Honda code diagnosed by a professional: Find a repair shop in your area
Information for Specific Honda Models
- P0339 2008 Honda Accord — Crankshaft Position Sensor 'A' Circuit Intermittent
- P0339 2009 Honda Accord — Crankshaft Position Sensor 'A' Circuit Intermittent
- P0339 2010 Honda Accord — Crankshaft Position Sensor 'A' Circuit Intermittent
- P0339 2016 Honda CR-V — Crankshaft Position Sensor Circuit Intermittent Interruption
- P0339 2017 Honda CR-V — Crankshaft Position Sensor Circuit Intermittent Interruption
- P0339 2018 Honda CR-V — Crankshaft Position Sensor Circuit Intermittent Interruption
- P0339 2019 Honda CR-V — Crankshaft Position Sensor Circuit Intermittent Interruption
- P0339 2020 Honda CR-V — Crankshaft Position Sensor Circuit Intermittent Interruption
- P0339 2021 Honda CR-V — Crankshaft Position Sensor Circuit Intermittent Interruption
Frequently Asked Questions about P0339 Honda Code
1. What are the common symptoms of OBDII code P0339 in a Honda?
- Common symptoms include engine stalling, rough idling, difficulty starting the vehicle, and a decrease in fuel efficiency.
2. What can cause the OBDII code P0339 to trigger in a Honda?
- The code P0339 usually indicates a faulty crankshaft position sensor, damaged wiring or connectors related to the sensor, or a poor connection within the sensor circuit.
3. How can I diagnose the cause of OBDII code P0339 in my Honda?
- A thorough visual inspection of the crankshaft position sensor and its wiring is recommended, along with using a multimeter to test for continuity and proper voltage in the circuit.
4. Is it safe to drive my Honda with OBDII code P0339 active?
- It is not recommended to drive the vehicle with an active P0339 code as it can lead to further engine damage and potential safety hazards.
5. Can a faulty crankshaft position sensor be repaired, or does it need to be replaced?
- In most cases, a faulty crankshaft position sensor needs to be replaced to resolve the P0339 code and restore proper engine functionality.
6. Are there any DIY repair tips for fixing OBDII code P0339 in a Honda?
- DIY repair tips include ensuring the sensor is properly aligned during installation, using OEM or high-quality replacement parts, and following the manufacturer's recommended procedures.
7. How much does it typically cost to repair OBDII code P0339 in a Honda?
- The cost of repairing OBDII code P0339 in a Honda can vary depending on the labor rates in your area, but it generally ranges from $150 to $300 for parts and labor.
8. Can resetting the OBDII code P0339 in my Honda temporarily fix the issue?
- Resetting the code may temporarily turn off the check engine light, but it will not fix the underlying issue causing the P0339 code to trigger.
9. Will the P0339 code affect the overall performance of my Honda vehicle?
- Yes, the P0339 code can affect the engine performance, fuel efficiency, and overall drivability of your Honda if not addressed promptly.
10. How soon should I address OBDII code P0339 in my Honda to prevent further damage?
- It is advisable to address the P0339 code as soon as possible to prevent potential engine misfires, stalling, or other serious drivability issues that could lead to more costly repairs.
Discuss the causes and fixes for P0339 Honda OBDII Code
-
I had my timing belt done about 2 weeks ago now this is happenign to my car
-
It's possible that the timing belt was not properly installed or jumped, but if the timing belt is OK then you have to replace the crankshaft position sensor.
-
It's possible that the timing belt was not properly installed or jumped. Start by checking the timing belt installation if you find the timing belt installation is OK then you have to replace the crankshaft position sensor.
-
I am an acura master technician. if you just had the belt and water pump done make sure the connectors don't have coolant in them since this will also cause it to code. I have never EVER replaced a crank sensor in all my 21 years and they typically never go bad. check all connectors for moisture before anything else
-
I have a 2008 Honda accord. The lights on the dash board keep coming for the VSA, TRANSMISSION, AND a triangle with an exclamation point in the middle. I am being told an update was needed as well as a new battery and started which was elated a month ago. Is there anything else that should be checked on my vehicle? I don't understand what these lights have to do with the starter and transmission
-
I have a 2011 Honda Odyssey!!! Misfire on cylinder 2 and 6!! Have the crank sensor sode.. we replaced the coil on cylinder 2 and 6 but nothing changed.
-
i have DIY my water pump,because the pump blade fell-off.(gates) that was causing it to over-heat. and ajust intake and exhaust value.( honda civic 2004 a/t sedan )car hard start and stall immediately .had to put foot down half way on throttle to start. got PO339 ,engine light stay on. change CKP sensor twice, same thing happen ,code and mil on.no change.
-
08 Honda accord had dead battery replaced it and replaced crank sensor plugs and can drive it 7 or 8 miles and then the vsa light comes on and then it sets code po339 and goes into limp mode not sure what to do
-
So problem started after replacing the battery, crankshaft position sensor and spark plugs? you didn't have the code before? why did you replaced the crankshaft position sensor?
Sorry for the questions, just trying to figure out what the problem is. -
been quoted £217,00 by Click Mechanic for a crankshaft position sensor on a 2006 honda civic, code has appeared twice in last month,but car is ok.
code P0339,
Starter is fine,battery ok,car runs well....... -
I have 08 Honda accord give me code p0339. Crank sensor So I changed that But the code keep coming back on Bring into the dealer. Tell me that I have to replaced the starter. I replaced the starter. the code just coming back. help
-
if you have never ever changed a crank position sensor on a acura or a honda and the only advice you have is to check for coolant in the connectors then I call your bluff on being a acura master technician, oil change boy maybe master tech ? I doubt it, if you were a master tech then you would most definitely be familiar with the pcm update or the relearn procedure you must do on a honda 2.4 code PO339 , intermittent signal sensor code, go home and watch more youtube you have no business answering complex problems like this !!!!!!! thank you !!!!
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.