P0336 2016 GMC Sierra Code - Crankshaft Position Sensor Performance
Quick Answer
The P0336 diagnostic trouble code indicates that there is a problem with the crankshaft position sensor's performance in a 2016 GMC Sierra. Common causes include Faulty crankshaft position sensor, Wiring or connector issues, Sensor alignment or installation problems. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0336 2016 GMC Sierra indicates Crankshaft Position Sensor Performance.
- Common causes
- Common causes include Faulty crankshaft position sensor, Wiring or connector issues, Sensor alignment or installation problems.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0336 2016 GMC Sierra Description
The P0336 diagnostic trouble code indicates that there is a problem with the crankshaft position sensor's performance in a 2016 GMC Sierra. The crankshaft position sensor is a vital component of the engine management system, as it monitors the position and speed of the crankshaft. This information is crucial for the engine control module to accurately adjust fuel injection timing and ignition timing. When the sensor fails or malfunctions, it can lead to a variety of performance issues and potentially cause the engine to stall or not start at all.
Common Causes of P0336 2016 GMC Sierra
- Faulty crankshaft position sensor
- Wiring or connector issues
- Sensor alignment or installation problems
- Damaged or worn-out reluctor ring
- Engine timing chain or belt issues
Symptoms of P0336 2016 GMC Sierra
- Engine misfires or rough idling
- Difficulty starting the engine
- Decreased fuel efficiency
- Engine stalling
- Check Engine Light illuminated on the dashboard
How to Fix P0336 2016 GMC Sierra
- Perform a diagnostic scan with an OBD-II scanner to confirm the P0336 code.
- Inspect the crankshaft position sensor and wiring for any visible damage or corrosion.
- Replace the faulty crankshaft position sensor if necessary.
- Check the reluctor ring for any damage and replace if needed.
- Clear the code from the engine control module and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0336 2016 GMC Sierra
The cost of repairing a P0336 code in a 2016 GMC Sierra can vary depending on the root cause of the issue. Typically, the price range for parts and labor can fall between $150 to $400. It's important to note that diagnostic time and labor rates at auto repair shops can fluctuate, so it's advisable to obtain quotes from multiple sources. Additionally, factors such as location, vehicle make and model, and the complexity of the repair can also impact the final cost.
Need more information about the P0336 2016 GMC Sierra code?
Need more information on how to fix the P0336 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0336 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0336 2016 GMC Sierra Code
What does the OBDII code P0336 mean on a 2016 GMC Sierra?
The P0336 code indicates a performance issue with the crankshaft position sensor, which monitors the position and rotational speed of the crankshaft.
What are common symptoms of the P0336 code on a 2016 GMC Sierra?
Symptoms can include engine misfires, difficulty starting, reduced engine power, stalling, and the illumination of the check engine light.
What causes the P0336 code on a 2016 GMC Sierra?
Common causes include a faulty crankshaft position sensor, damaged wiring or connectors, issues with the reluctor ring, or engine timing problems.
Can I drive my 2016 GMC Sierra with the P0336 code?
Driving with this code is not recommended, as it can lead to further engine damage or sudden stalling, which could cause unsafe driving conditions.
How do you diagnose the P0336 code on a 2016 GMC Sierra?
Diagnosis typically involves using an OBDII scanner, inspecting the crankshaft position sensor and its wiring, checking the reluctor ring for damage, and verifying engine timing.
How do you fix the P0336 code on a 2016 GMC Sierra?
Repairs may include replacing the crankshaft position sensor, repairing or replacing damaged wiring, or addressing issues with the reluctor ring or engine timing.
How much does it cost to fix the P0336 code on a 2016 GMC Sierra?
Repair costs can vary but may range from $150 to $400, depending on whether the crankshaft position sensor or related components need replacement.
Can a dirty or damaged reluctor ring cause the P0336 code on a 2016 GMC Sierra?
Yes, a dirty, damaged, or misaligned reluctor ring can disrupt the sensor's readings and trigger the P0336 code.
How can I prevent the P0336 code from occurring on my 2016 GMC Sierra?
Regular maintenance, including checking the sensor wiring and ensuring the reluctor ring is clean and undamaged, can help prevent this code.
Will clearing the P0336 code with an OBDII scanner fix the issue on a 2016 GMC Sierra?
Clearing the code may turn off the check engine light temporarily, but the underlying issue must be addressed to avoid the code returning.
Discuss the causes and fixes for P0336 2016 GMC Sierra OBDII Code
Code P0336 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.