P0336 2014 Chevrolet Silverado Code - Crankshaft Position Sensor Performance
Quick Answer
The P0336 diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado indicates that there is a problem with the crankshaft position sensor's performance. Common causes include Faulty crankshaft position sensor, Wiring or connector issues related to the sensor, Poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0336 2014 Chevrolet Silverado indicates Crankshaft Position Sensor Performance.
- Common causes
- Common causes include Faulty crankshaft position sensor, Wiring or connector issues related to the sensor, Poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0336 2014 Chevrolet Silverado Description
The P0336 diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado indicates that there is a problem with the crankshaft position sensor's performance. The crankshaft position sensor is a vital component of the engine management system, responsible for monitoring the position and speed of the crankshaft. This information is crucial for the engine control unit (ECU) to accurately determine ignition timing, fuel injection timing, and other essential parameters for proper engine operation.
Common Causes of P0336 2014 Chevrolet Silverado
- Faulty crankshaft position sensor
- Wiring or connector issues related to the sensor
- Poor electrical connection
- Engine timing belt or chain problems
- ECU malfunction
Symptoms of P0336 2014 Chevrolet Silverado
- Engine misfires or rough idling
- Difficulty starting the engine
- Engine stalling or shutting off unexpectedly
- Decreased fuel efficiency
- Illumination of the check engine light
How to Fix P0336 2014 Chevrolet Silverado
- Diagnose the issue by using a scan tool to read the DTC and check the sensor's output signal.
- Inspect the wiring and connectors for any signs of damage or corrosion.
- Replace the crankshaft position sensor if it is found to be faulty.
- Clear the DTC and perform a test drive to confirm the issue has been resolved.
- If the problem persists, further diagnosis may be necessary to identify and address any underlying issues.
Cost to Fix P0336 2014 Chevrolet Silverado
The cost of repairing a P0336 DTC on a 2014 Chevrolet Silverado can vary depending on the specific cause of the issue. Generally, replacing a faulty crankshaft position sensor can range from $100 to $300, including parts and labor. However, additional costs may apply if other components need to be repaired or replaced. It is recommended to consult with a trusted mechanic or dealership to get an accurate estimate based on your vehicle's specific needs and location.
Need more information about the P0336 2014 Chevrolet Silverado code?
Need more information on how to fix the P0336 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0336 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0336 2014 Chevrolet Silverado Code
1. What does the OBDII code P0336 mean on a 2014 Chevrolet Silverado?
P0336 indicates a performance issue with the crankshaft position sensor, specifically detecting a problem with its signal or circuit.
2. What are the common symptoms of code P0336 in a 2014 Chevrolet Silverado?
Symptoms include engine misfires, rough idling, stalling, difficulty starting, reduced power, and the check engine light turning on.
3. What causes the P0336 code in a 2014 Chevrolet Silverado?
Common causes include a faulty crankshaft position sensor, damaged wiring or connectors, a misaligned or damaged reluctor ring, or issues with the engine control module (ECM).
4. Can I drive my 2014 Chevrolet Silverado with a P0336 code?
While the truck may still run, driving with a P0336 code is not recommended, as it can lead to further engine damage or unsafe driving conditions.
5. How do I fix the P0336 code on my 2014 Chevrolet Silverado?
Repairs may include replacing the crankshaft position sensor, repairing or replacing damaged wiring or connectors, inspecting the reluctor ring for damage, or reprogramming the ECM if necessary.
6. How much does it cost to repair a P0336 code on a 2014 Chevrolet Silverado?
The cost varies but typically ranges from $150 to $300, depending on whether the crankshaft position sensor needs replacement or additional wiring repairs are required.
7. How can I diagnose the P0336 code on my 2014 Chevrolet Silverado?
Start by using an OBDII scanner to confirm the code, then visually inspect the crankshaft position sensor, wiring, and reluctor ring for damage. A multimeter can be used to test the sensor's signal.
8. Can a bad crankshaft position sensor cause stalling in my 2014 Chevrolet Silverado?
Yes, a faulty sensor can disrupt engine timing, leading to stalling or difficulty starting the vehicle.
9. Will clearing the P0336 code without repairs fix the issue?
Clearing the code may turn off the check engine light temporarily, but the underlying issue will persist and the code is likely to return.
10. Is the P0336 code related to the camshaft position sensor on a 2014 Chevrolet Silverado?
While the crankshaft and camshaft position sensors work together for engine timing, P0336 specifically refers to a problem with the crankshaft position sensor or its circuit.
Discuss the causes and fixes for P0336 2014 Chevrolet Silverado OBDII Code
Code P0336 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.