Engine-Codes.com
Engine-Codes – Honda – P0336 1999 Honda Civic

P0336 1999 Honda Civic Code - Crankshaft Position Sensor 'A' Circuit Range/Performance

Quick Answer

The P0336 diagnostic trouble code (DTC) for a 1999 Honda Civic specifically indicates a problem with the Crankshaft Position Sensor 'A' Circuit Range/Performance. Common causes include Faulty crankshaft position sensor, Damaged or corroded sensor wiring, Loose or poor connection at the sensor connector. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0336 1999 Honda Civic indicates Crankshaft Position Sensor 'A' Circuit Range/Performance.
Common causes
Common causes include Faulty crankshaft position sensor, Damaged or corroded sensor wiring, Loose or poor connection at the sensor connector.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 12, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0336 1999 Honda Civic Description

The P0336 diagnostic trouble code (DTC) for a 1999 Honda Civic specifically indicates a problem with the Crankshaft Position Sensor 'A' Circuit Range/Performance. The crankshaft position sensor is a crucial component in the engine management system, responsible for monitoring the position and rotational speed of the crankshaft. This information is essential for the engine control unit (ECU) to accurately determine ignition timing, fuel injection timing, and other critical functions.

OBDII Code P0336 1999 Honda Civic - Crankshaft Position Sensor 'A' Circuit Range/Performance
P0336 1999 Honda Civic Code - Crankshaft Position Sensor 'A' Circuit Range/Performance

Common Causes of P0336 1999 Honda Civic

  1. Faulty crankshaft position sensor
  2. Damaged or corroded sensor wiring
  3. Loose or poor connection at the sensor connector
  4. Issues with the ECU receiving or interpreting the sensor signal
  5. Engine timing belt or chain issues affecting sensor operation

Symptoms of P0336 1999 Honda Civic

  1. Engine misfires
  2. Rough idling or stalling
  3. Difficulty starting the engine
  4. Reduced fuel efficiency
  5. Illumination of the Check Engine Light

How to Fix P0336 1999 Honda Civic

  1. Perform a diagnostic scan to confirm the P0336 code and pinpoint the exact cause of the issue.
  2. Inspect the crankshaft position sensor and its wiring for any visible damage, wear, or corrosion.
  3. Test the sensor's resistance and output signal with a multimeter to determine if it is functioning within specifications.
  4. Replace the crankshaft position sensor if it is found to be faulty, ensuring proper installation and connection.
  5. Clear the DTC from the ECU memory and test drive the vehicle to confirm that the issue has been resolved.

Cost to Fix P0336 1999 Honda Civic

The typical repair costs for addressing a P0336 code in a 1999 Honda Civic can vary depending on the specific cause of the issue and the cost of parts and labor in your area. In general, replacing a faulty crankshaft position sensor can range from $50 to $200, with additional costs for diagnostic scans, labor, and any other necessary repairs. Overall, you can expect to pay anywhere from $100 to $400 for this repair, but it's advisable to consult with a professional mechanic for a more accurate estimate based on your vehicle's specific needs. Keep in mind that labor rates at auto repair shops can vary, so it's essential to shop around and compare prices before proceeding with the repair.

What does this mean?

Tech Notes for P0336 1999 Honda Civic

Sometimes and in some models, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replaced battery.

When is the Code Detected?

The crankshaft position sensor (POS) signal is not detected by the Electronic Control Module (ECM) during the first few seconds of engine cranking

Need more information about the P0336 1999 Honda Civic code?

Need more information on how to fix the P0336 1999 Honda Civic code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0336 1999 Honda Civic code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0336 1999 Honda Civic Code

1. What does OBDII code P0336 mean on a 1999 Honda Civic?

Code P0336 indicates that the Engine Control Module (ECM) has detected a problem with the signal from the Crankshaft Position Sensor 'A' either being out of range or having performance issues.

2. What are common symptoms of code P0336 in a 1999 Honda Civic?

Common symptoms include engine stalling or misfiring, difficulty starting the engine, reduced fuel efficiency, and possibly the engine failing to start at all. The check engine light will also be illuminated.

3. What can cause the P0336 code to appear in a 1999 Honda Civic?

Causes can include a faulty crankshaft position sensor, damaged wiring or connectors associated with the sensor, issues with the reluctor ring (part of the crankshaft that provides the sensor signal), or a malfunctioning ECM.

4. How can I fix the P0336 code in a 1999 Honda Civic?

Repair strategies include checking and, if necessary, replacing the crankshaft position sensor, repairing any damaged wiring or connectors, inspecting the reluctor ring for damage, and checking the ECM for faults. Always ensure connections are clean and secure.

5. Is it safe to drive my 1999 Honda Civic with code P0336?

It is not recommended to drive with this code active as it can lead to engine performance issues that might cause the vehicle to stall or stop unexpectedly, which can be dangerous.

6. How do I diagnose the P0336 code on my 1999 Honda Civic?

Diagnosis should start with scanning the ECM for codes and assessing the crankshaft position sensor and its circuit. Checking for visible signs of damage to wiring and testing the sensor's resistance and signal output can help pinpoint the issue.

7. What tools are required to diagnose and repair code P0336 on a 1999 Honda Civic?

Tools needed may include a digital multimeter, an OBDII scanner, basic hand tools, and possibly an oscilloscope to check the sensor's waveform output.

8. Could a bad battery or alternator cause the P0336 code in a 1999 Honda Civic?

While a bad battery or alternator can cause various engine issues, they are unlikely to directly cause a P0336 code. This code specifically relates to performance issues or incorrect signals from the crankshaft position sensor.

9. What is the cost to fix the P0336 code in a 1999 Honda Civic?

Costs can vary widely but generally include the price of the crankshaft position sensor (if replacement is needed), which can range from $50 to $150, plus labor costs which can depend on the vehicle’s condition and location. Total repair costs can range from $150 to $300.

10. How urgent is it to address the P0336 code in a 1999 Honda Civic?

Addressing code P0336 is fairly urgent to prevent potential engine damage or unsafe driving conditions due to engine stalling or poor vehicle performance.

Discuss the causes and fixes for P0336 1999 Honda Civic OBDII Code

Submit a New Comment

Code P0336 1999 Honda Civic comments

No comments found for this page.