Engine-Codes.com
Engine-Codes – Mitsubishi – P0335 Mitsubishi

P0335 Mitsubishi Code - Crankshaft Position Sensor Circuit

Quick Answer

The P0335 diagnostic trouble code (DTC) indicates a problem with the crankshaft position sensor circuit in a Mitsubishi vehicle. Common causes include Faulty crankshaft position sensor, Damaged or corroded wiring/connectors in the sensor circuit, Issues with the reluctor ring on the crankshaft. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0335 Mitsubishi indicates Crankshaft Position Sensor Circuit.
Common causes
Common causes include Faulty crankshaft position sensor, Damaged or corroded wiring/connectors in the sensor circuit, Issues with the reluctor ring on the crankshaft.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 06, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0335 Mitsubishi Description

The P0335 diagnostic trouble code (DTC) indicates a problem with the crankshaft position sensor circuit in a Mitsubishi vehicle. The crankshaft position sensor is a vital component that monitors the rotation speed and position of the crankshaft in the engine. This information is crucial for the engine control unit (ECU) to determine ignition timing, fuel injection timing, and other important functions. When the ECU detects an issue with the crankshaft position sensor circuit, it can lead to poor engine performance, misfires, stalling, and even engine failure in severe cases.

OBDII Code P0335 Mitsubishi - Crankshaft Position Sensor Circuit
P0335 Mitsubishi Code - Crankshaft Position Sensor Circuit

Common Causes of P0335 Mitsubishi

  1. Faulty crankshaft position sensor
  2. Damaged or corroded wiring/connectors in the sensor circuit
  3. Issues with the reluctor ring on the crankshaft
  4. ECU software or hardware problems
  5. Engine timing belt or chain issues

Symptoms of P0335 Mitsubishi

  1. Difficulty starting the engine or no start condition
  2. Engine misfires and rough idling
  3. Reduced fuel efficiency
  4. Engine stalling or shutting off unexpectedly
  5. Loss of power while driving

How to Fix P0335 Mitsubishi

  1. Diagnose the issue using a scan tool to confirm the P0335 code and check for related codes
  2. Inspect the crankshaft position sensor and its wiring for damage or corrosion
  3. Test the sensor's output signal with a multimeter to ensure it is within specifications
  4. Replace the crankshaft position sensor if it is faulty
  5. Clear the DTC and perform a road test to verify that the issue has been resolved

Cost to Fix P0335 Mitsubishi

The cost of repairing a P0335 code in a Mitsubishi vehicle can vary depending on the specific model and year. Typically, the crankshaft position sensor itself can range from $50 to $150, with additional costs for labor. Overall, the repair can cost between $150 and $300 at a reputable auto repair shop. However, it's important to note that prices may differ based on the location, vehicle make and model, and the shop's hourly labor rates. It's recommended to obtain quotes from multiple shops to get the best estimate for the repair.

What does this mean?

Tech Notes for P0335 Mitsubishi

Sometimes and in some models, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replaced battery.

When is the Code Detected?

The crankshaft position sensor (POS) signal is not detected by the Electronic Control Module (ECM) during the first few seconds of engine cranking

Need more information about the P0335 Mitsubishi code?

Need more information on how to fix the P0335 Mitsubishi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0335 Mitsubishi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0335 Mitsubishi Code

1. What are common symptoms of OBDII code P0335 in a Mitsubishi related to the crankshaft position sensor circuit?

Symptoms may include engine stalling, rough idling, difficulty starting the vehicle, and a decrease in fuel efficiency.

2. What are the common causes of OBDII code P0335 in a Mitsubishi related to the crankshaft position sensor circuit?

Common causes may include a faulty crankshaft position sensor, damaged wiring or connectors, issues with the sensor's alignment, or a malfunctioning ECM.

3. How can I diagnose the issue causing OBDII code P0335 in my Mitsubishi related to the crankshaft position sensor circuit?

Diagnosis typically involves using a scan tool to read the code, testing the crankshaft position sensor for proper voltage and signal, inspecting wiring and connectors for damage, and checking the sensor's alignment.

4. Can a faulty crankshaft position sensor be repaired, or does it need to be replaced?

In most cases, a faulty crankshaft position sensor will need to be replaced rather than repaired to ensure proper functioning of the sensor circuit.

5. Are there any repair tips for addressing OBDII code P0335 in a Mitsubishi related to the crankshaft position sensor circuit?

Ensure that the replacement sensor is compatible with your Mitsubishi's make and model, carefully follow the manufacturer's instructions for installation, and clear the trouble code after completing the repair.

6. How important is it to address OBDII code P0335 in a Mitsubishi related to the crankshaft position sensor circuit promptly?

It is important to address this code promptly as the crankshaft position sensor plays a crucial role in the engine's operation, and ignoring the issue can lead to further damage or engine performance issues.

7. Can driving with OBDII code P0335 in a Mitsubishi related to the crankshaft position sensor circuit cause any additional damage?

Continued driving with this code present can potentially lead to further issues such as engine misfires, increased fuel consumption, or even engine failure in extreme cases.

8. Will resetting the OBDII trouble code P0335 in a Mitsubishi related to the crankshaft position sensor circuit permanently fix the problem?

Simply resetting the code will not fix the underlying issue causing P0335. Proper diagnosis and repair of the crankshaft position sensor circuit are necessary to resolve the problem effectively.

9. How much does it typically cost to repair OBDII code P0335 in a Mitsubishi related to the crankshaft position sensor circuit?

The cost of repairing this issue can vary depending on the cause of the problem, the cost of parts, and labor charges. It is advisable to consult a professional mechanic for an accurate estimate.

10. Can a DIY enthusiast with basic automotive knowledge tackle the repair for OBDII code P0335 in a Mitsubishi related to the crankshaft position sensor circuit?

While some DIY enthusiasts may feel comfortable replacing a crankshaft position sensor, diagnosing and repairing the underlying cause of P0335 may require more advanced automotive knowledge. If unsure, it is best to consult a professional mechanic.

Discuss the causes and fixes for P0335 Mitsubishi OBDII Code

Submit a New Comment

  • Dont know anything about codes. My 2005 Mitsubishi 380 went to the dealer today because of a engine warning light on the dash. $149.00 to read the problem on the computer.$868.00 to replace a Crankshaft position sensor.Does this sound correct or have I been taken for a ride. After reading some of the comments and causes that are being shared around I think I might have been.

    Reply to Comment

  • Prices are high, but sometimes it depends where you live. You could ask them to explain the repair and show you where the sensor is and why it cost that much.

    Reply to Comment

  • you got robbed

    Reply to Comment

  • i recently had to rep;ace the crankshaft sensror on my 2001 galant. since then the car will crank but wont start. ive replaced the sensor with a new one, as well as replaced the cam shaft sensor,nthe fuel pump, timinhg belt, and have meticulously set the timing in hopes of solving my problem. nothing works! i have noticed though, that my anti-theft system does not seem to be operating. the little light that should come on my dash doesnt and the alarm system doesnt set. i know that this could be a reason for my car not STARTING BECAUSE IVE Had this problem with a car before. ive done everything and this seems like it may be the problem...help!

    Reply to Comment

    • If your 2001 Galant cranks but won’t start after replacing the crankshaft sensor and other components, the anti-theft system could indeed be the issue. A malfunctioning immobilizer can prevent the car from starting. Check if the key fob and immobilizer system are functioning properly, as the absence of the anti-theft light suggests a potential issue. You may need to reset the anti-theft system or reprogram the key. If that doesn’t work, verify all sensor connections and ensure there’s spark and fuel delivery. Consulting a professional with the ability to scan the immobilizer system may help resolve the issue.

      Reply to Comment