Engine-Codes.com
Engine-Codes – Isuzu – P0335 Isuzu

P0335 Isuzu Code - Crankshaft Position Sensor Circuit

Quick Answer

The P0335 code for Isuzu vehicles indicates a problem with the crankshaft position sensor circuit. Common causes include Faulty crankshaft position sensor, Damaged or corroded wiring connecting the sensor to the ECU, Poor electrical connections at the sensor or ECU. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0335 Isuzu indicates Crankshaft Position Sensor Circuit.
Common causes
Common causes include Faulty crankshaft position sensor, Damaged or corroded wiring connecting the sensor to the ECU, Poor electrical connections at the sensor or ECU.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 07, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0335 Isuzu Description

The P0335 code for Isuzu vehicles indicates a problem with the crankshaft position sensor circuit. The crankshaft position sensor is a vital component in the engine management system, as it monitors the position and rotational speed of the crankshaft. This information is crucial for the engine control unit (ECU) to determine the ignition timing and fuel injection timing.

OBDII Code P0335 Isuzu - Crankshaft Position Sensor Circuit
P0335 Isuzu Code - Crankshaft Position Sensor Circuit

Common Causes of P0335 Isuzu

  1. Faulty crankshaft position sensor
  2. Damaged or corroded wiring connecting the sensor to the ECU
  3. Poor electrical connections at the sensor or ECU
  4. Issues with the ECU's ability to interpret sensor signals
  5. Engine mechanical problems affecting sensor readings

Symptoms of P0335 Isuzu

  1. Engine running rough or misfiring
  2. Engine stalling or difficulty starting
  3. Loss of power or poor acceleration
  4. Check Engine Light illuminated
  5. Vehicle going into "limp mode"

How to Fix P0335 Isuzu

  1. Diagnose the issue by using a scan tool to read the code and verify the crankshaft position sensor's operation.
  2. Inspect the wiring and connections for damage, corrosion, or loose connections. Repair or replace as necessary.
  3. Test the crankshaft position sensor using a multimeter to check for proper resistance and signal output.
  4. Replace the crankshaft position sensor if it is found to be faulty or malfunctioning.
  5. Clear the code from the ECU's memory and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P0335 Isuzu

The cost of repairing a P0335 code on an Isuzu vehicle can vary depending on the specific model, the location of the repair shop, and the labor rates. On average, replacing a crankshaft position sensor can cost between $100 and $250, including parts and labor. Additional costs may apply if wiring repairs or ECU diagnostics are necessary. It is recommended to obtain quotes from local auto repair shops to get a more accurate estimate based on your vehicle's needs.

What does this mean?

Tech Notes for P0335 Isuzu

Sometimes and in some models, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replaced battery.

When is the Code Detected?

The crankshaft position sensor (POS) signal is not detected by the Electronic Control Module (ECM) during the first few seconds of engine cranking

Need more information about the P0335 Isuzu code?

Need more information on how to fix the P0335 Isuzu code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0335 Isuzu code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0335 Isuzu Code

1. What are the common symptoms of OBDII code P0335 in an Isuzu related to the crankshaft position sensor circuit?

- Common symptoms include engine stalling, rough idling, difficulty starting the engine, and a decrease in fuel efficiency.

2. What are the potential causes of the P0335 code in an Isuzu?

- The code P0335 in an Isuzu is commonly triggered by a faulty crankshaft position sensor, damaged wiring or connectors, or issues with the sensor's alignment.

3. How can I diagnose a faulty crankshaft position sensor in my Isuzu when experiencing the P0335 code?

- To diagnose a faulty crankshaft position sensor, perform a visual inspection of the sensor and its wiring, test the sensor's resistance, and use a scan tool to monitor the sensor's data while the engine is running.

4. Can a malfunctioning crankshaft position sensor lead to other engine problems in an Isuzu with the P0335 code?

- Yes, a malfunctioning crankshaft position sensor can lead to misfiring, poor acceleration, and potential damage to the engine if not addressed promptly.

5. Are there any tips for repairing the crankshaft position sensor circuit related to the P0335 code in an Isuzu?

- When repairing the crankshaft position sensor circuit, ensure proper alignment of the sensor, replace any damaged wiring or connectors, and use a high-quality replacement sensor to prevent future issues.

6. Will driving my Isuzu with the P0335 code cause further damage to the engine?

- Continuing to drive your Isuzu with the P0335 code can potentially lead to more severe engine problems, so it's best to address the issue as soon as possible.

7. How much does it typically cost to replace a faulty crankshaft position sensor in an Isuzu with the P0335 code?

- The cost of replacing a faulty crankshaft position sensor in an Isuzu can vary depending on the model and labor costs, but it generally ranges from $100 to $300 for parts and labor.

8. Can I reset the P0335 code in my Isuzu after repairing the crankshaft position sensor circuit?

- Yes, you can reset the P0335 code using an OBDII scanner or by disconnecting the car's battery for a few minutes to clear the error code from the vehicle's system.

9. How important is the crankshaft position sensor for the overall performance of my Isuzu with the P0335 code?

- The crankshaft position sensor is crucial for the engine's performance, as it helps the vehicle's computer control ignition timing and fuel injection, making it essential for proper engine operation.

10. Is it recommended to seek professional help when dealing with the P0335 code in my Isuzu's crankshaft position sensor circuit?

- Yes, it is advisable to consult a professional mechanic or technician for proper diagnosis and repair of the P0335 code in your Isuzu to ensure the issue is resolved correctly and prevent further complications.

Discuss the causes and fixes for P0335 Isuzu OBDII Code

Submit a New Comment

  • P0335 code error is ecm repair to what componet ?sumitomo 4hk1 ecm caircut broad dairgream please.

    Reply to Comment

  • Sir we have long cranking problem got dtc p0355 I replaced ckp sensor check the voltage of sensor connector side get 5 v 5v and ECU ground (low reference )all are good we check circuit continuity all are good what possible more this problem please support to fixing the problem

    Thanks
    Regard

    Reply to Comment

  • What model and year is your Isuzu?

    Reply to Comment