Engine-Codes.com
Engine-Codes – Honda – P0335 2020 Honda CR-V

P0335 2020 Honda CR-V Code - Crankshaft Position Sensor No Signal

Quick Answer

The P0335 diagnostic trouble code (DTC) for a 2020 Honda CR-V indicates a problem with the crankshaft position sensor (CKP) not sending a signal to the engine control module (ECM). Common causes include Faulty crankshaft position sensor, Damaged or corroded sensor wiring, Poor electrical connection between the sensor and ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0335 2020 Honda CR-V indicates Crankshaft Position Sensor No Signal.
Common causes
Common causes include Faulty crankshaft position sensor, Damaged or corroded sensor wiring, Poor electrical connection between the sensor and ECM.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 14, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0335 2020 Honda CR-V Description

The P0335 diagnostic trouble code (DTC) for a 2020 Honda CR-V indicates a problem with the crankshaft position sensor (CKP) not sending a signal to the engine control module (ECM). The CKP sensor is a vital component that monitors the position and rotational speed of the crankshaft, providing crucial data for ignition timing and fuel injection. When the ECM does not receive a signal from the CKP sensor, it can lead to a range of performance issues and potentially cause the vehicle to stall or not start at all.

OBDII Code P0335 2020 Honda CR-V - Crankshaft Position Sensor No Signal
P0335 2020 Honda CR-V Code - Crankshaft Position Sensor No Signal

Common Causes of P0335 2020 Honda CR-V

  1. Faulty crankshaft position sensor
  2. Damaged or corroded sensor wiring
  3. Poor electrical connection between the sensor and ECM
  4. Issues with the ECM itself
  5. Mechanical problems affecting the crankshaft or timing chain

Symptoms of P0335 2020 Honda CR-V

  1. Engine misfires or runs rough
  2. Difficulty starting the engine
  3. Reduced fuel efficiency
  4. Engine stalling or shutting off unexpectedly
  5. Illumination of the check engine light

How to Fix P0335 2020 Honda CR-V

  1. Begin by locating the crankshaft position sensor, typically located near the crankshaft pulley or flywheel.
  2. Inspect the sensor and wiring for any visible damage, corrosion, or loose connections.
  3. Test the sensor using a multimeter to check for proper resistance and voltage output.
  4. If the sensor is faulty, replace it with a new OEM or high-quality aftermarket sensor.
  5. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P0335 2020 Honda CR-V

The cost of repairing a P0335 code on a 2020 Honda CR-V can vary depending on the specific cause of the issue. In general, the price of a new crankshaft position sensor ranges from $50 to $150, while labor costs for sensor replacement typically range from $100 to $200. Overall, the total repair cost for this issue could range from $150 to $350, including parts and labor. It's important to note that diagnostic time and labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate.

What does this mean?

Tech Notes for P0335 2020 Honda CR-V

Sometimes, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replace the battery.

Need more information about the P0335 2020 Honda CR-V code?

Need more information on how to fix the P0335 2020 Honda CR-V code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0335 2020 Honda CR-V code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0335 2020 Honda CR-V Code

1. What does OBDII code P0335 on a 2020 Honda CR-V indicate?

- OBDII code P0335 in a 2020 Honda CR-V indicates a malfunction in the crankshaft position sensor, specifically no signal being detected.

2. What are common symptoms of a P0335 code in a 2020 Honda CR-V?

- Common symptoms include engine stalling, rough idling, difficulty starting the engine, and a noticeable decrease in fuel efficiency.

3. What could cause the P0335 code to appear in a 2020 Honda CR-V?

- The P0335 code in a 2020 Honda CR-V is typically triggered by a faulty crankshaft position sensor, damaged wiring or connectors related to the sensor, or issues with the sensor's alignment.

4. How can I diagnose a P0335 code on my 2020 Honda CR-V?

- Diagnosing a P0335 code involves using an OBDII scanner to confirm the code, checking the wiring and connectors for any visible damage, and testing the crankshaft position sensor for proper function.

5. Can a faulty crankshaft position sensor be repaired or does it need to be replaced in a 2020 Honda CR-V?

- In most cases, a faulty crankshaft position sensor will need to be replaced rather than repaired to ensure proper engine performance and reliability in a 2020 Honda CR-V.

6. Are there any tips for replacing the crankshaft position sensor in a 2020 Honda CR-V?

- When replacing the crankshaft position sensor, make sure to disconnect the battery, follow proper safety precautions, consult a repair manual for guidance, and consider replacing related components if needed.

7. How important is it to address a P0335 code promptly in a 2020 Honda CR-V?

- It is crucial to address a P0335 code promptly in a 2020 Honda CR-V to prevent potential engine damage, further performance issues, and ensure safe operation of the vehicle.

8. Can a P0335 code in a 2020 Honda CR-V be cleared/reset without fixing the underlying issue?

- While the code can be cleared/reset temporarily, it is not recommended as the underlying issue causing the P0335 code will persist and may lead to more severe problems over time.

9. Is it possible to drive a 2020 Honda CR-V with a P0335 code?

- It is not recommended to drive a 2020 Honda CR-V with a P0335 code as it can result in engine performance issues, potential stalling, and other safety concerns.

10. How much does it typically cost to fix a P0335 code in a 2020 Honda CR-V?

- The cost of fixing a P0335 code in a 2020 Honda CR-V can vary depending on the cause of the issue, but it generally ranges from $150 to $300 for parts and labor.

Discuss the causes and fixes for P0335 2020 Honda CR-V OBDII Code

Submit a New Comment

Code P0335 2020 Honda CR-V comments

No comments found for this page.