P0335 2018 Toyota RAV4 Code - Crankshaft Position Sensor 'A' Circuit
Quick Answer
The P0335 diagnostic trouble code (DTC) indicates that there is a malfunction in the crankshaft position sensor 'A' circuit in a 2018 Toyota RAV4. Common causes include Faulty crankshaft position sensor, Damaged or frayed sensor wiring, Poor electrical connections. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2018 Toyota RAV4 indicates Crankshaft Position Sensor 'A' Circuit .
- Common causes
- Common causes include Faulty crankshaft position sensor, Damaged or frayed sensor wiring, Poor electrical connections.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0335 2018 Toyota RAV4 Description
The P0335 diagnostic trouble code (DTC) indicates that there is a malfunction in the crankshaft position sensor 'A' circuit in a 2018 Toyota RAV4. The crankshaft position sensor is a vital component of the engine management system, as it monitors the position and rotational speed of the crankshaft. This information is crucial for the engine control module (ECM) to accurately control ignition timing and fuel injection. When the sensor malfunctions or fails, it can lead to erratic engine operation, misfires, poor fuel efficiency, and even engine stalling.
Common Causes of P0335 2018 Toyota RAV4
- Faulty crankshaft position sensor
- Damaged or frayed sensor wiring
- Poor electrical connections
- Engine timing belt or chain issues
- ECM malfunction
Symptoms of P0335 2018 Toyota RAV4
- Engine misfires or rough idling
- Difficulty starting the engine
- Reduced fuel efficiency
- Engine stalling or shutting off unexpectedly
- Illumination of the check engine light
How to Fix P0335 2018 Toyota RAV4
- Diagnose the issue by using a diagnostic scanner to retrieve the fault code and test the crankshaft position sensor.
- Inspect the sensor wiring and connections for any damage or corrosion.
- Replace the crankshaft position sensor if it is found to be faulty.
- Clear the DTC and reset the ECM to see if the issue has been resolved.
- Test drive the vehicle to ensure the problem has been fixed and the check engine light does not reappear.
Cost to Fix P0335 2018 Toyota RAV4
The typical cost to repair a crankshaft position sensor 'A' circuit issue in a 2018 Toyota RAV4 can vary depending on the location and repair shop. On average, the cost of parts for a new sensor can range from $50 to $150, while labor costs can range from $100 to $200. In total, the repair could cost anywhere from $150 to $350. Additional costs may apply if any other components need to be replaced or if further diagnosis is required. It is recommended to consult with a trusted mechanic or repair shop for an accurate estimate.
Tech Notes for P0335 2018 Toyota RAV4
Need more information about the P0335 2018 Toyota RAV4 code?
Need more information on how to fix the P0335 2018 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2018 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2018 Toyota RAV4 Code
1. What does the OBDII code P0335 mean for a 2018 Toyota RAV4?
P0335 indicates a malfunction in the Crankshaft Position Sensor 'A' circuit, which is responsible for monitoring the crankshaft's position and speed.
2. What are common symptoms of the P0335 code in a 2018 Toyota RAV4?
Symptoms include engine stalling, difficulty starting the vehicle, rough idle, reduced fuel efficiency, and the Check Engine Light turning on.
3. What causes the P0335 code on a 2018 Toyota RAV4?
Common causes include a faulty crankshaft position sensor, damaged wiring or connectors, issues with the sensor’s reluctor ring, or a problem with the engine control module (ECM).
4. Can I drive my 2018 Toyota RAV4 with the P0335 code?
It’s not recommended to drive the vehicle with this code, as it can lead to stalling or further engine damage.
5. How do I fix the P0335 code on a 2018 Toyota RAV4?
Repairs may involve replacing the crankshaft position sensor, repairing or replacing damaged wiring, or inspecting and cleaning the reluctor ring.
6. How much does it cost to fix the P0335 code on a 2018 Toyota RAV4?
The cost typically ranges from $150 to $400, depending on whether the crankshaft position sensor or wiring needs replacement.
7. How can I diagnose the P0335 code on a 2018 Toyota RAV4?
Use a scan tool to confirm the code, inspect the crankshaft position sensor and wiring for damage, and check the reluctor ring for debris or misalignment.
8. Does the P0335 code affect engine performance in a 2018 Toyota RAV4?
Yes, the code can cause poor engine performance, stalling, and difficulty starting the vehicle.
9. What tools are needed to repair the P0335 code on a 2018 Toyota RAV4?
Common tools include a digital multimeter, an OBDII scan tool, and basic automotive hand tools for removing and replacing components.
10. Can a dead battery cause the P0335 code in a 2018 Toyota RAV4?
While unlikely, a weak or dead battery can sometimes cause electrical issues that might contribute to sensor-related errors.
Discuss the causes and fixes for P0335 2018 Toyota RAV4 OBDII Code
Code P0335 2018 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.