P0335 2017 Toyota RAV4 Code - Crankshaft Position Sensor 'A' Circuit
Quick Answer
The P0335 diagnostic trouble code (DTC) for a 2017 Toyota RAV4 refers to the Crankshaft Position Sensor 'A' Circuit. Common causes include Faulty crankshaft position sensor, Damaged wiring or connectors in the sensor circuit, Issues with the ECU. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2017 Toyota RAV4 indicates Crankshaft Position Sensor 'A' Circuit .
- Common causes
- Common causes include Faulty crankshaft position sensor, Damaged wiring or connectors in the sensor circuit, Issues with the ECU.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0335 2017 Toyota RAV4 Description
The P0335 diagnostic trouble code (DTC) for a 2017 Toyota RAV4 refers to the Crankshaft Position Sensor 'A' Circuit. The crankshaft position sensor is a vital component in the engine management system of a vehicle. It is responsible for monitoring the position and speed of the crankshaft, which helps the engine control unit (ECU) determine the ignition timing and fuel injection timing.
Common Causes of P0335 2017 Toyota RAV4
- Faulty crankshaft position sensor
- Damaged wiring or connectors in the sensor circuit
- Issues with the ECU
- Poor connection or grounding of the sensor
- Physical damage to the sensor
Symptoms of P0335 2017 Toyota RAV4
- Rough idling or running
- Engine stalling
- Misfiring
- Difficulty starting the engine
- Loss of power or acceleration
How to Fix P0335 2017 Toyota RAV4
- Diagnose the issue by using a diagnostic scanner to confirm the P0335 code and check the sensor's functionality.
- Locate the crankshaft position sensor, typically located near the crankshaft pulley.
- Inspect the sensor, wiring, and connectors for any signs of damage or wear.
- Replace the crankshaft position sensor if it is found to be faulty, ensuring proper installation and connection.
- Clear the DTC from the ECU memory and test the vehicle to ensure the issue has been resolved.
Cost to Fix P0335 2017 Toyota RAV4
The cost of repairing the Crankshaft Position Sensor 'A' Circuit issue can vary depending on the location, vehicle make and model, and the labor rates of the auto repair shop. However, on average, the parts for a new crankshaft position sensor can range from $50 to $150, while the labor cost can be between $100 to $200. Overall, the total repair cost for this issue could be around $150 to $350. It's recommended to inquire with local auto repair shops for a more accurate estimate based on your specific circumstances.
Tech Notes for P0335 2017 Toyota RAV4
Need more information about the P0335 2017 Toyota RAV4 code?
Need more information on how to fix the P0335 2017 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2017 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2017 Toyota RAV4 Code
What does the OBDII code P0335 mean for a 2017 Toyota RAV4?
P0335 indicates a malfunction in the Crankshaft Position Sensor 'A' circuit, which is responsible for monitoring the crankshaft's position and rotational speed.
What are common symptoms of code P0335 in a 2017 Toyota RAV4?
Symptoms include engine stalling, difficulty starting, rough idling, reduced fuel efficiency, and the Check Engine Light turning on.
What causes the P0335 code in a 2017 Toyota RAV4?
Common causes include a faulty crankshaft position sensor, damaged wiring or connectors in the sensor circuit, a failed reluctor ring, or issues with the engine control module (ECM).
Can I drive my 2017 Toyota RAV4 with a P0335 code?
Driving with P0335 is not recommended as it can lead to engine stalling or performance issues, potentially causing unsafe driving conditions.
How do you diagnose the P0335 code on a 2017 Toyota RAV4?
Diagnosis involves inspecting the crankshaft position sensor, checking wiring and connectors for damage, testing the reluctor ring, and scanning the ECM for additional codes.
How much does it cost to fix the P0335 code on a 2017 Toyota RAV4?
Repair costs vary but generally range from $150 to $400 depending on whether the crankshaft position sensor, wiring, or other components need replacement.
Can a faulty crankshaft position sensor cause long-term damage?
Yes, prolonged issues with the crankshaft position sensor can lead to engine misfires, reduced fuel efficiency, and potential damage to the catalytic converter.
What tools do I need to repair the P0335 code on a 2017 Toyota RAV4?
Basic tools include a diagnostic scanner, multimeter, socket set, and potentially a replacement crankshaft position sensor.
How do you reset the P0335 code after repairs?
After fixing the issue, use an OBDII scanner to clear the code and verify that the problem has been resolved.
Is it possible for the P0335 code to return after repairs?
Yes, the code can return if the underlying issue wasn’t fully addressed, such as overlooked wiring damage or a faulty ECM.
Discuss the causes and fixes for P0335 2017 Toyota RAV4 OBDII Code
Code P0335 2017 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.