P0335 2017 Honda CR-V Code - Crankshaft Position Sensor No Signal
Quick Answer
The P0335 diagnostic trouble code (DTC) for a 2017 Honda CR-V indicates that there is no signal being received from the crankshaft position sensor. Common causes include Faulty crankshaft position sensor, Damaged or corroded sensor wiring, Loose or disconnected sensor connector. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2017 Honda CR-V indicates Crankshaft Position Sensor No Signal.
- Common causes
- Common causes include Faulty crankshaft position sensor, Damaged or corroded sensor wiring, Loose or disconnected sensor connector.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0335 2017 Honda CR-V Description
The P0335 diagnostic trouble code (DTC) for a 2017 Honda CR-V indicates that there is no signal being received from the crankshaft position sensor. The crankshaft position sensor is a vital component in the engine management system, as it provides the engine control module (ECM) with information about the position and speed of the crankshaft. This data is crucial for the ECM to accurately control ignition timing and fuel injection, ensuring optimal engine performance.
Common Causes of P0335 2017 Honda CR-V
- Faulty crankshaft position sensor
- Damaged or corroded sensor wiring
- Loose or disconnected sensor connector
- Issues with the reluctor wheel
- ECM software or hardware issues
Symptoms of P0335 2017 Honda CR-V
- Engine misfires
- Difficulty starting the engine
- Stalling while driving
- Decreased fuel efficiency
- Rough idling
How to Fix P0335 2017 Honda CR-V
- Begin by locating the crankshaft position sensor on the engine.
- Inspect the sensor wiring and connector for any damage or corrosion. Repair or replace as necessary.
- Test the sensor using a multimeter to check for proper resistance and signal output.
- If the sensor is faulty, replace it with a new one following manufacturer's guidelines.
- Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0335 2017 Honda CR-V
The cost of repairing a crankshaft position sensor issue on a 2017 Honda CR-V can vary depending on the specific cause of the problem and the cost of parts and labor in your area. On average, the cost of replacing a crankshaft position sensor ranges from $100 to $300, including parts and labor. However, additional diagnostic time and labor costs may apply, so it's recommended to consult with a professional mechanic for a more accurate estimate based on your specific circumstances. Keep in mind that labor rates can vary between auto repair shops, so it's advisable to shop around for the best deal.
Tech Notes for P0335 2017 Honda CR-V
Need more information about the P0335 2017 Honda CR-V code?
Need more information on how to fix the P0335 2017 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2017 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2017 Honda CR-V Code
1. What does the OBDII code P0335 mean on a 2017 Honda CR-V?
P0335 indicates a "Crankshaft Position Sensor No Signal," meaning the engine's computer is not receiving a signal from the crankshaft position sensor.
2. What are the symptoms of a P0335 code on a 2017 Honda CR-V?
Common symptoms include engine stalling, difficulty starting, reduced power, rough idling, or the engine not starting at all.
3. What causes the P0335 code to appear on a 2017 Honda CR-V?
Potential causes include a faulty crankshaft position sensor, damaged wiring or connectors, a failed engine control module (ECM), or issues with the crankshaft reluctor ring.
4. How is the P0335 code diagnosed on a 2017 Honda CR-V?
A mechanic will typically use a scan tool to confirm the code, inspect the sensor and wiring, test the sensor's resistance, and verify the signal using an oscilloscope.
5. Can I drive my 2017 Honda CR-V with a P0335 code?
It's not recommended, as the engine may stall or fail to start, potentially leaving you stranded or causing safety risks.
6. How do I fix a P0335 code on my 2017 Honda CR-V?
Repairs may include replacing the crankshaft position sensor, repairing damaged wiring, or addressing issues with the crankshaft reluctor ring.
7. How much does it cost to fix a P0335 code on a 2017 Honda CR-V?
The cost to replace a crankshaft position sensor typically ranges from $150 to $300, depending on labor rates and part prices.
8. Can a dead battery cause a P0335 code on a 2017 Honda CR-V?
While unlikely, a weak or dead battery could cause electrical issues that might indirectly trigger the code. It's best to check the battery voltage.
9. Does the P0335 code always mean the sensor is bad on a 2017 Honda CR-V?
No, the issue could also be with the wiring, connectors, ECM, or crankshaft reluctor ring rather than the sensor itself.
10. How do I prevent a P0335 code on my 2017 Honda CR-V?
Regular maintenance, ensuring the crankshaft position sensor and wiring are in good condition, and addressing engine issues promptly can help prevent this code.
Discuss the causes and fixes for P0335 2017 Honda CR-V OBDII Code
Code P0335 2017 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.