Engine-CodesToyota – P0335 2016 Toyota RAV4

P0335 2016 Toyota RAV4 Code - Crankshaft Position Sensor 'A' Circuit

Quick Answer

The P0335 diagnostic trouble code for a 2016 Toyota RAV4 indicates a problem with the Crankshaft Position Sensor 'A' Circuit. Common causes include Faulty or damaged crankshaft position sensor, Wiring issues or loose connections in the sensor circuit, Corrosion or buildup on the sensor contacts. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0335 2016 Toyota RAV4 indicates Crankshaft Position Sensor 'A' Circuit .
Common causes
Common causes include Faulty or damaged crankshaft position sensor, Wiring issues or loose connections in the sensor circuit, Corrosion or buildup on the sensor contacts.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Aug 18, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0335 2016 Toyota RAV4 Description

The P0335 diagnostic trouble code for a 2016 Toyota RAV4 indicates a problem with the Crankshaft Position Sensor 'A' Circuit. The crankshaft position sensor is a crucial component in the engine management system, as it monitors the position and rotational speed of the crankshaft. This information is used by the engine control module (ECM) to determine ignition timing and fuel injection timing. When the ECM detects an issue with the crankshaft position sensor circuit, it can lead to poor engine performance, misfires, and potential stalling. Ignoring this code can result in further engine damage and ultimately lead to the vehicle not starting at all.

OBDII Code P0335 2016 Toyota RAV4 - Crankshaft Position Sensor 'A' Circuit
P0335 2016 Toyota RAV4 Code - Crankshaft Position Sensor 'A' Circuit

Common Causes of P0335 2016 Toyota RAV4

  1. Faulty or damaged crankshaft position sensor
  2. Wiring issues or loose connections in the sensor circuit
  3. Corrosion or buildup on the sensor contacts
  4. ECM software malfunction
  5. Timing belt or chain issues affecting sensor synchronization

Symptoms of P0335 2016 Toyota RAV4

  1. Engine misfires
  2. Rough idling or stalling
  3. Decreased fuel efficiency
  4. Difficulty starting the vehicle
  5. Illumination of the check engine light

How to Fix P0335 2016 Toyota RAV4

  1. Diagnose the issue by using a scan tool to confirm the P0335 code and inspecting the crankshaft position sensor and related wiring.
  2. Replace the faulty crankshaft position sensor if it is found to be defective.
  3. Check and repair any damaged wiring or connections in the sensor circuit.
  4. Clear the trouble code from the ECM and perform a test drive to ensure the issue is resolved.
  5. If the problem persists, further diagnostic testing may be needed to identify other potential causes.

Cost to Fix P0335 2016 Toyota RAV4

The cost estimate for repairing a P0335 code on a 2016 Toyota RAV4 can vary depending on the exact cause of the issue. On average, the cost of replacing a crankshaft position sensor ranges from $100 to $200, including parts and labor. Additional costs may apply if wiring repairs or ECM reprogramming are necessary. It's recommended to consult with a qualified mechanic or auto repair shop to get an accurate estimate based on the specific circumstances of the vehicle.

Tech Notes for P0335 2016 Toyota RAV4

Sometimes and in some models, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replace the battery.

Need more information about the P0335 2016 Toyota RAV4 code?

Need more information on how to fix the P0335 2016 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0335 2016 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0335 2016 Toyota RAV4 Code

What does the OBDII code P0335 mean on a 2016 Toyota RAV4?

The P0335 code indicates a malfunction in the Crankshaft Position Sensor 'A' circuit, which monitors the position and rotational speed of the crankshaft.

What are the common symptoms of code P0335 on a 2016 Toyota RAV4?

Symptoms may include engine stalling, difficulty starting, reduced power, rough idling, or the engine failing to start altogether.

What causes the P0335 code to appear on a 2016 Toyota RAV4?

Common causes include a faulty crankshaft position sensor, damaged wiring or connectors, a failed reluctor ring, or issues with the engine control module (ECM).

Can I drive my 2016 Toyota RAV4 with a P0335 code?

Driving with a P0335 code is not recommended as it can lead to stalling or further engine damage, which may compromise safety.

How do I diagnose the P0335 code on a 2016 Toyota RAV4?

Diagnosis involves inspecting the crankshaft position sensor, checking the wiring and connectors for damage, testing the sensor with a multimeter, and verifying the reluctor ring is intact.

How much does it cost to fix the P0335 code on a 2016 Toyota RAV4?

Repair costs vary but typically range from $150 to $300, depending on whether the crankshaft position sensor, wiring, or other components need replacement.

What tools are needed to repair a P0335 code on a 2016 Toyota RAV4?

You may need a multimeter, OBDII scanner, basic hand tools, and potentially a replacement crankshaft position sensor.

How do I replace the crankshaft position sensor on a 2016 Toyota RAV4?

Locate the sensor near the engine block, disconnect the wiring connector, remove the mounting bolt, replace the sensor, and reconnect the wiring.

Can a bad battery cause the P0335 code on a 2016 Toyota RAV4?

A weak or failing battery can sometimes cause electrical issues, but it is not a common cause of the P0335 code. A thorough diagnosis is recommended.

Will clearing the P0335 code fix the problem on a 2016 Toyota RAV4?

Clearing the code may temporarily remove the check engine light, but the underlying issue must be repaired to prevent the code from returning.

Discuss the causes and fixes for P0335 2016 Toyota RAV4 OBDII Code

Code P0335 2016 Toyota RAV4 comments

No comments found for this page.