P0335 2015 Toyota RAV4 Code - Crankshaft Position Sensor 'A' Circuit
Quick Answer
The P0335 diagnostic trouble code (DTC) in a 2015 Toyota RAV4 indicates that there is a malfunction in the Crankshaft Position Sensor 'A' circuit. Common causes include Faulty crankshaft position sensor, Damaged wiring or connectors, Corrosion in the sensor connections. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2015 Toyota RAV4 indicates Crankshaft Position Sensor 'A' Circuit .
- Common causes
- Common causes include Faulty crankshaft position sensor, Damaged wiring or connectors, Corrosion in the sensor connections.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0335 2015 Toyota RAV4 Description
The P0335 diagnostic trouble code (DTC) in a 2015 Toyota RAV4 indicates that there is a malfunction in the Crankshaft Position Sensor 'A' circuit. The crankshaft position sensor is a vital component in the vehicle's engine management system as it monitors the position and rotational speed of the crankshaft. This information is crucial for the engine control unit (ECU) to determine the ignition timing and fuel injection strategy, ensuring optimal engine performance and efficiency.
Common Causes of P0335 2015 Toyota RAV4
- Faulty crankshaft position sensor
- Damaged wiring or connectors
- Corrosion in the sensor connections
- Issues with the ECU
- Poor electrical grounding
Symptoms of P0335 2015 Toyota RAV4
- Rough idling
- Engine misfires
- Stalling
- Hesitation during acceleration
- Difficulty starting
How to Fix P0335 2015 Toyota RAV4
- Diagnose the issue by using a scan tool to retrieve the DTC and perform a visual inspection of the sensor, wiring, and connectors.
- Test the crankshaft position sensor using a multimeter to check for proper resistance and signal output.
- Replace the faulty sensor if it fails testing, ensuring proper installation and connection.
- Inspect and repair any damaged wiring or connectors, ensuring good electrical connections.
- Clear the DTC from the ECU memory and perform a test drive to confirm that the issue has been resolved.
Cost to Fix P0335 2015 Toyota RAV4
The cost of repairing the Crankshaft Position Sensor 'A' circuit on a 2015 Toyota RAV4 can vary depending on the price of the sensor, any additional parts needed, and the labor rates at the auto repair shop. On average, the parts for this repair can range from $50 to $200, while the labor costs can be between $100 and $200. This brings the total estimated cost to approximately $150 to $400. It's important to note that these are rough estimates, and actual costs may vary based on location, shop rates, and other factors. It's recommended to get quotes from different repair shops to find the best price for the repair.
Tech Notes for P0335 2015 Toyota RAV4
Need more information about the P0335 2015 Toyota RAV4 code?
Need more information on how to fix the P0335 2015 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2015 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2015 Toyota RAV4 Code
What does the OBDII code P0335 mean for a 2015 Toyota RAV4?
The P0335 code indicates a malfunction in the Crankshaft Position Sensor 'A' circuit, which can disrupt engine timing and performance.
What are common symptoms of the P0335 code in a 2015 Toyota RAV4?
Symptoms may include difficulty starting the engine, stalling, rough idling, reduced power, and the Check Engine Light illuminated.
What causes the P0335 code in a 2015 Toyota RAV4?
Common causes include a faulty crankshaft position sensor, damaged wiring or connectors, a misaligned timing belt, or issues with the engine control module (ECM).
Can I drive my 2015 Toyota RAV4 with the P0335 code active?
Driving with the P0335 code is not recommended as it can lead to stalling, poor performance, and potential engine damage.
How do I diagnose the P0335 code in a 2015 Toyota RAV4?
Diagnosis typically involves checking the crankshaft position sensor, inspecting wiring and connectors, and verifying the timing belt alignment.
How do I fix the P0335 code on a 2015 Toyota RAV4?
Repairs might involve replacing the crankshaft position sensor, repairing damaged wiring, cleaning connectors, or addressing ECM issues.
How much does it cost to repair the P0335 code in a 2015 Toyota RAV4?
Repair costs can range from $100 to $300, depending on whether the sensor, wiring, or another component needs replacement.
Can a dirty or damaged connector cause the P0335 code in a 2015 Toyota RAV4?
Yes, a dirty or damaged connector can disrupt the signal from the crankshaft position sensor, triggering the P0335 code.
Is the crankshaft position sensor hard to replace in a 2015 Toyota RAV4?
Replacing the sensor is generally straightforward but may require access to tight spaces and removal of other components.
Will clearing the code fix the P0335 issue in a 2015 Toyota RAV4?
Clearing the code will temporarily remove the Check Engine Light, but it won’t resolve the underlying issue causing the P0335 code.
Discuss the causes and fixes for P0335 2015 Toyota RAV4 OBDII Code
Code P0335 2015 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.