P0335 2013 Toyota RAV4 Code - Crankshaft Position Sensor 'A' Circuit
Quick Answer
The P0335 diagnostic trouble code (DTC) for a 2013 Toyota RAV4 specifically refers to the Crankshaft Position Sensor 'A' Circuit. Common causes include Faulty crankshaft position sensor, Damaged or corroded wiring/connectors in the circuit, ECU malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2013 Toyota RAV4 indicates Crankshaft Position Sensor 'A' Circuit .
- Common causes
- Common causes include Faulty crankshaft position sensor, Damaged or corroded wiring/connectors in the circuit, ECU malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0335 2013 Toyota RAV4 Description
The P0335 diagnostic trouble code (DTC) for a 2013 Toyota RAV4 specifically refers to the Crankshaft Position Sensor 'A' Circuit. The crankshaft position sensor is a vital component in the engine management system, responsible for monitoring the position and rotational speed of the crankshaft. This information is crucial for the engine control unit (ECU) to accurately determine ignition timing, fuel injection timing, and other critical functions.
Common Causes of P0335 2013 Toyota RAV4
- Faulty crankshaft position sensor
- Damaged or corroded wiring/connectors in the circuit
- ECU malfunction
- Timing belt issues affecting crankshaft position
Symptoms of P0335 2013 Toyota RAV4
- Engine misfires or rough idling
- Stalling or difficulty starting the vehicle
- Reduced fuel efficiency
- Illumination of the check engine light
- Engine may fail to start
How to Fix P0335 2013 Toyota RAV4
- Begin by diagnosing the root cause of the P0335 code using a scan tool to monitor the crankshaft position sensor's output.
- Inspect the wiring and connectors for any signs of damage or corrosion. Repair or replace as necessary.
- Test the crankshaft position sensor's resistance and output voltage to determine if it is functioning correctly. Replace if faulty.
- Clear the DTC with a scan tool after completing the repair to reset the ECU and monitor for any reoccurrence of the code.
- Perform a test drive to ensure the vehicle's performance has been restored and that the check engine light does not reappear.
Cost to Fix P0335 2013 Toyota RAV4
The typical repair costs for addressing a P0335 code on a 2013 Toyota RAV4 can range from $150 to $300, including parts and labor. However, it's essential to note that these costs can vary based on factors such as location, the specific diagnosis time required, and labor rates at auto repair shops. It is recommended to obtain quotes from local shops to get a more accurate estimate based on your individual circumstances.
Tech Notes for P0335 2013 Toyota RAV4
Need more information about the P0335 2013 Toyota RAV4 code?
Need more information on how to fix the P0335 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2013 Toyota RAV4 Code
1. What does the OBDII code P0335 mean on a 2013 Toyota RAV4?
P0335 indicates a malfunction in the Crankshaft Position Sensor 'A' Circuit, which monitors the position and rotational speed of the crankshaft.
2. What are the symptoms of the P0335 code in a 2013 Toyota RAV4?
Common symptoms include difficulty starting the engine, stalling, poor acceleration, reduced fuel efficiency, and the check engine light turning on.
3. What causes the P0335 code on a 2013 Toyota RAV4?
Potential causes include a faulty crankshaft position sensor, damaged wiring or connectors, a failed reluctor ring, or issues with the engine control module (ECM).
4. Can I drive my 2013 Toyota RAV4 with the P0335 code?
Driving with the P0335 code is not recommended, as it can lead to stalling and unsafe driving conditions. It should be addressed promptly.
5. How is the P0335 code diagnosed on a 2013 Toyota RAV4?
A technician will use a scan tool to confirm the code, inspect the crankshaft position sensor and its wiring, test the sensor's signal, and check the ECM for faults.
6. How do you fix the P0335 code on a 2013 Toyota RAV4?
Repairs may involve replacing the crankshaft position sensor, repairing damaged wiring, cleaning or replacing the reluctor ring, or reprogramming the ECM if necessary.
7. What tools are needed to fix the P0335 code on a 2013 Toyota RAV4?
Common tools include an OBDII scan tool, a multimeter for testing electrical circuits, and basic hand tools for sensor replacement.
8. How much does it cost to fix the P0335 code on a 2013 Toyota RAV4?
Repair costs vary but can range from $100 to $300, depending on parts and labor required for sensor replacement or wiring repairs.
9. Can a dirty reluctor ring cause the P0335 code on a 2013 Toyota RAV4?
Yes, a dirty or damaged reluctor ring can cause improper readings, leading to the P0335 code.
10. Does a bad battery cause the P0335 code in a 2013 Toyota RAV4?
While unlikely, a weak or failing battery can cause voltage issues that may affect the crankshaft position sensor circuit and trigger the P0335 code.
Discuss the causes and fixes for P0335 2013 Toyota RAV4 OBDII Code
Code P0335 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.