Engine-Codes.com
Engine-Codes – Nissan – P0335 2013 Nissan Rogue

P0335 2013 Nissan Rogue Code - Crankshaft Position Sensor Circuit

Quick Answer

The P0335 diagnostic trouble code (DTC) for a 2013 Nissan Rogue relates to the Crankshaft Position Sensor Circuit. Common causes include Faulty crankshaft position sensor, Damaged or corroded wiring connecting the sensor to the ECM, Poor electrical connection or loose connector. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0335 2013 Nissan Rogue indicates Crankshaft Position Sensor Circuit.
Common causes
Common causes include Faulty crankshaft position sensor, Damaged or corroded wiring connecting the sensor to the ECM, Poor electrical connection or loose connector.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Aug 30, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0335 2013 Nissan Rogue Description

The P0335 diagnostic trouble code (DTC) for a 2013 Nissan Rogue relates to the Crankshaft Position Sensor Circuit. The crankshaft position sensor is a crucial component in the engine management system, as it monitors the position and speed of the crankshaft. This information is vital for the engine control module (ECM) to accurately time the ignition and fuel injection, ensuring optimal engine performance. When the ECM detects an issue with the crankshaft position sensor circuit, it can lead to various performance issues and potentially cause the engine to stall or misfire.

OBDII Code P0335 2013 Nissan Rogue - Crankshaft Position Sensor Circuit
P0335 2013 Nissan Rogue Code - Crankshaft Position Sensor Circuit

Common Causes of P0335 2013 Nissan Rogue

  1. Faulty crankshaft position sensor
  2. Damaged or corroded wiring connecting the sensor to the ECM
  3. Poor electrical connection or loose connector
  4. Issues with the ECM itself
  5. Timing belt or chain problems affecting the sensor's readings

Symptoms of P0335 2013 Nissan Rogue

  1. Engine misfires or runs rough
  2. Difficulty starting the engine or extended cranking time
  3. Sudden loss of power while driving
  4. Check Engine Light illuminated on the dashboard
  5. Unusual engine vibrations or noises

How to Fix P0335 2013 Nissan Rogue

  1. Diagnose the issue using a scan tool to confirm the P0335 code and identify the specific problem.
  2. Locate the crankshaft position sensor in the engine bay and inspect it for any visible damage or corrosion.
  3. Test the sensor's electrical connections and wiring for continuity and proper voltage levels.
  4. Replace the crankshaft position sensor if it is found to be faulty, ensuring it is properly aligned and secured.
  5. Clear the DTC from the ECM's memory and perform a test drive to verify that the issue has been resolved.

Cost to Fix P0335 2013 Nissan Rogue

The cost of repairing a P0335 DTC on a 2013 Nissan Rogue can vary depending on the specific cause of the issue. In general, replacing a faulty crankshaft position sensor can range from $50 to $150 for the part, with additional labor costs of around $100 to $200. Keep in mind that diagnostic time and labor rates may vary, so it's advisable to consult with a local auto repair shop for a more accurate estimate.

What does this mean?

Tech Notes for P0335 2013 Nissan Rogue

Sometimes and in some models, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replace the battery.

When is the Code Detected?

The crankshaft position sensor (POS) signal is not detected by the Electronic Control Module (ECM) during the first few seconds of engine cranking

Need more information about the P0335 2013 Nissan Rogue code?

Need more information on how to fix the P0335 2013 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0335 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0335 2013 Nissan Rogue Code

1. What are the common symptoms of OBDII code P0335 in a 2013 Nissan Rogue related to the Crankshaft Position Sensor Circuit?

- Common symptoms include engine stalling, rough idling, difficulty starting the vehicle, and potential loss of power while driving.

2. What are the typical causes of OBDII code P0335 in a 2013 Nissan Rogue?

- The code P0335 in a 2013 Nissan Rogue is often caused by a faulty crankshaft position sensor, damaged wiring or connectors, or issues with the sensor's alignment.

3. How can I diagnose the OBDII code P0335 in my 2013 Nissan Rogue?

- Diagnosis typically involves using an OBDII scanner to read the code, checking the sensor's connections and wiring for any damage, and testing the sensor's functionality.

4. Is it safe to continue driving my 2013 Nissan Rogue with OBDII code P0335 related to the Crankshaft Position Sensor Circuit?

- It is not recommended to drive the vehicle with a faulty crankshaft position sensor, as it can lead to more serious engine problems and potential safety risks.

5. Can I replace the crankshaft position sensor in my 2013 Nissan Rogue myself?

- While it is possible to replace the crankshaft position sensor yourself, it is recommended to have a professional mechanic perform the task to ensure proper installation and calibration.

6. Are there any repair tips for fixing OBDII code P0335 in a 2013 Nissan Rogue?

- Ensure the engine is cool before working on the sensor, follow the manufacturer's guidelines for sensor replacement, and clear the trouble code after the repair is completed.

7. How much does it typically cost to repair OBDII code P0335 in a 2013 Nissan Rogue at a mechanic's shop?

- The cost of repairing OBDII code P0335 related to the Crankshaft Position Sensor Circuit in a 2013 Nissan Rogue can vary, but it generally ranges from $150 to $300, including parts and labor.

8. Can a faulty crankshaft position sensor cause other issues in my 2013 Nissan Rogue besides triggering OBDII code P0335?

- Yes, a faulty crankshaft position sensor can cause issues such as poor fuel economy, misfiring, and problems with the transmission shifting smoothly.

9. How long does it take to replace the crankshaft position sensor in a 2013 Nissan Rogue?

- The replacement of the crankshaft position sensor in a 2013 Nissan Rogue typically takes around 1-2 hours, depending on the accessibility of the sensor and any complications that may arise during the process.

Discuss the causes and fixes for P0335 2013 Nissan Rogue OBDII Code

Submit a New Comment

Code P0335 2013 Nissan Rogue comments

No comments found for this page.