Engine-CodesToyota – P0335 2011 Toyota Camry

P0335 2011 Toyota Camry Code - Crankshaft Position Sensor 'A' Circuit

Quick Answer

The P0335 diagnostic trouble code (DTC) for a 2011 Toyota Camry refers to the Crankshaft Position Sensor 'A' Circuit. Common causes include Faulty crankshaft position sensor, Damaged wiring or connectors in the sensor circuit, Corrosion or contamination in the sensor connector. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0335 2011 Toyota Camry indicates Crankshaft Position Sensor 'A' Circuit .
Common causes
Common causes include Faulty crankshaft position sensor, Damaged wiring or connectors in the sensor circuit, Corrosion or contamination in the sensor connector.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 11, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0335 2011 Toyota Camry Description

The P0335 diagnostic trouble code (DTC) for a 2011 Toyota Camry refers to the Crankshaft Position Sensor 'A' Circuit. This code indicates that there is a malfunction in the circuit that controls the crankshaft position sensor. The crankshaft position sensor is a vital component of the engine management system, as it provides the engine control module (ECM) with information about the position of the crankshaft. This information is crucial for proper ignition timing and fuel injection.

OBDII Code P0335 2011 Toyota Camry - Crankshaft Position Sensor 'A' Circuit
P0335 2011 Toyota Camry Code - Crankshaft Position Sensor 'A' Circuit

Common Causes of P0335 2011 Toyota Camry

  1. Faulty crankshaft position sensor
  2. Damaged wiring or connectors in the sensor circuit
  3. Corrosion or contamination in the sensor connector
  4. Issues with the ECM
  5. Timing belt or chain issues affecting sensor alignment

Symptoms of P0335 2011 Toyota Camry

  1. Engine misfires or runs rough
  2. Difficulty starting the engine
  3. Stalling or hesitation while driving
  4. Reduced fuel efficiency
  5. Illumination of the check engine light

How to Fix P0335 2011 Toyota Camry

  1. Diagnose the issue by using a scan tool to confirm the P0335 code and inspecting the sensor and its wiring for damage.
  2. Replace the crankshaft position sensor if it is found to be faulty.
  3. Repair or replace damaged wiring or connectors in the sensor circuit.
  4. Clean any corrosion or contamination in the sensor connector.
  5. Reset the ECM and clear the code to see if the issue has been resolved.

Cost to Fix P0335 2011 Toyota Camry

The typical repair costs for addressing a P0335 code on a 2011 Toyota Camry can range from $100 to $300, depending on the extent of the repair needed. This estimate includes the cost of a new crankshaft position sensor, any necessary wiring repairs, and labor. However, it's important to note that the specific diagnosis time and labor rates at auto repair shops can vary, so it's recommended to check with local shops for a more accurate estimate.

Tech Notes for P0335 2011 Toyota Camry

Sometimes and in some models, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replaced battery.

When is the Code Detected?

The crankshaft position sensor (POS) signal is not detected by the Electronic Control Module (ECM) during the first few seconds of engine cranking

Need more information about the P0335 2011 Toyota Camry code?

Need more information on how to fix the P0335 2011 Toyota Camry code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0335 2011 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0335 2011 Toyota Camry Code

1. What is OBDII code P0335 in a 2011 Toyota Camry?

OBDII code P0335 indicates a malfunction in the Crankshaft Position Sensor 'A' Circuit, suggesting that the sensor or its circuit is not functioning properly.

2. What symptoms might I notice if my 2011 Toyota Camry has the P0335 code?

Common symptoms include difficulty starting the engine, rough engine operation, engine stalling, and a check engine light that is illuminated.

3. What can cause the P0335 code to appear in a 2011 Toyota Camry?

Potential causes include a faulty crankshaft position sensor, damaged wiring or connectors in the sensor circuit, or a problem with the engine control module.

4. How can I diagnose the P0335 code in my 2011 Toyota Camry?

Diagnosis should start with a visual inspection of the crankshaft position sensor and its connections. Use an OBDII scanner to check for additional error codes and a multimeter to verify the sensor's output.

5. What is the repair process for fixing the P0335 code in a 2011 Toyota Camry?

Repair may involve replacing the crankshaft position sensor, repairing or replacing damaged wiring, or in some cases, updating or replacing the engine control module.

6. Is it safe to drive my 2011 Toyota Camry with the P0335 code?

Driving with the P0335 code can lead to engine performance issues and potential stalling, which could be unsafe. It is advisable to address the problem as soon as possible.

7. How urgent is it to fix the P0335 code on a 2011 Toyota Camry?

It is fairly urgent to address this issue to prevent possible engine damage or stalling that could put you in unsafe driving situations.

8. Can a faulty crankshaft position sensor affect fuel economy in a 2011 Toyota Camry?

Yes, a malfunctioning crankshaft position sensor can affect fuel economy by causing the engine to run inefficiently.

9. What tools are needed to replace the crankshaft position sensor in a 2011 Toyota Camry?

Typical tools required include a socket set, screwdrivers, and possibly pliers. A multimeter can help in verifying the functionality of the sensor before replacing it.

10. How much does it typically cost to resolve the P0335 code in a 2011 Toyota Camry?

The cost can vary widely depending on whether the issue is with the sensor itself, wiring, or the control module. Sensor replacement typically ranges from $150 to $400 including parts and labor.

Discuss the causes and fixes for P0335 2011 Toyota Camry OBDII Code

Code P0335 2011 Toyota Camry comments

No comments found for this page.