P0335 2011 Nissan Sentra Code - Crankshaft Position Sensor Circuit
Quick Answer
The P0335 diagnostic trouble code (DTC) for a 2011 Nissan Sentra specifically refers to a problem with the crankshaft position sensor circuit. Common causes include Faulty crankshaft position sensor, Damaged wiring or connectors in the sensor circuit, Corrosion or poor connection in the sensor circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2011 Nissan Sentra indicates Crankshaft Position Sensor Circuit.
- Common causes
- Common causes include Faulty crankshaft position sensor, Damaged wiring or connectors in the sensor circuit, Corrosion or poor connection in the sensor circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0335 2011 Nissan Sentra Description
The P0335 diagnostic trouble code (DTC) for a 2011 Nissan Sentra specifically refers to a problem with the crankshaft position sensor circuit. The crankshaft position sensor is a vital component in the engine management system, as it monitors the position and rotational speed of the crankshaft. This information is crucial for the engine control unit (ECU) to accurately determine ignition timing and fuel injection timing.
Common Causes of P0335 2011 Nissan Sentra
- Faulty crankshaft position sensor
- Damaged wiring or connectors in the sensor circuit
- Corrosion or poor connection in the sensor circuit
- Issues with the ECU receiving the sensor signal
- Mechanical damage to the crankshaft position sensor
Symptoms of P0335 2011 Nissan Sentra
- Engine misfires or hesitations
- Rough idling or stalling
- Reduced fuel efficiency
- Difficulty starting the engine
- Engine may fail to start
How to Fix P0335 2011 Nissan Sentra
- Diagnose the issue by using a scan tool to read the DTC and check the sensor's signal.
- Inspect the wiring harness and connectors for any damage or corrosion.
- Test the crankshaft position sensor using a multimeter to check for proper resistance and signal output.
- Replace the crankshaft position sensor if it is found to be faulty.
- Clear the DTC and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0335 2011 Nissan Sentra
The cost of repairing a P0335 code on a 2011 Nissan Sentra can vary depending on the specific cause of the issue. Generally, the cost of a new crankshaft position sensor ranges from $50 to $150, depending on the brand and quality. Labor costs can range from $100 to $300, depending on the shop's hourly rate and the time required for diagnosis and repair. Overall, the total cost for this repair could range from $150 to $450. It's important to note that these are rough estimates, and actual costs may vary based on location and other factors.
Tech Notes for P0335 2011 Nissan Sentra
When is the Code Detected?
Need more information about the P0335 2011 Nissan Sentra code?
Need more information on how to fix the P0335 2011 Nissan Sentra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2011 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2011 Nissan Sentra Code
What are the common symptoms of OBDII code P0335 on a 2011 Nissan Sentra?
Common symptoms include engine stalling, rough idle, difficulty starting the car, and a decrease in fuel efficiency.
What are the possible causes of OBDII code P0335 on a 2011 Nissan Sentra?
The code P0335 on a 2011 Nissan Sentra is typically triggered by a faulty crankshaft position sensor, damaged wiring or connectors related to the sensor, or a malfunctioning engine control module (ECM).
How can I diagnose the issue with OBDII code P0335 on my 2011 Nissan Sentra?
To diagnose the issue, you can use an OBDII scanner to read the code, visually inspect the crankshaft position sensor and its wiring for any visible damage, and perform a continuity test on the sensor and its circuit.
Can I drive my 2011 Nissan Sentra with OBDII code P0335?
It is not recommended to drive your 2011 Nissan Sentra with OBDII code P0335, as it can lead to further engine damage and potential safety hazards. It is best to address the issue promptly.
How do I repair OBDII code P0335 on a 2011 Nissan Sentra?
To repair OBDII code P0335 on a 2011 Nissan Sentra, you will likely need to replace the faulty crankshaft position sensor, repair or replace any damaged wiring or connectors, and clear the error code using an OBDII scanner.
Can a DIYer fix OBDII code P0335 on a 2011 Nissan Sentra?
While some DIYers may be able to replace the crankshaft position sensor themselves, diagnosing and repairing electrical issues related to OBDII code P0335 may require advanced automotive knowledge and tools. It's recommended to seek professional help if needed.
Is it necessary to reset the ECM after fixing OBDII code P0335 on a 2011 Nissan Sentra?
Yes, it is essential to reset the ECM after fixing OBDII code P0335 on a 2011 Nissan Sentra to clear the error code and ensure proper functioning of the vehicle.
What are the potential risks of ignoring OBDII code P0335 on a 2011 Nissan Sentra?
Ignoring OBDII code P0335 can lead to continued engine issues, potential engine damage, decreased fuel efficiency, and even safety hazards due to unexpected stalling or rough idling. It's crucial to address the problem promptly.
Discuss the causes and fixes for P0335 2011 Nissan Sentra OBDII Code
Code P0335 2011 Nissan Sentra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.