Engine-Codes.com
Engine-Codes – Nissan – P0335 2011 Nissan Rogue

P0335 2011 Nissan Rogue Code - Crankshaft Position Sensor Circuit

Quick Answer

The P0335 diagnostic trouble code (DTC) for a 2011 Nissan Rogue indicates a problem with the crankshaft position sensor circuit. Common causes include Faulty crankshaft position sensor, Damaged or corroded wiring/connectors in the sensor circuit, Issues with the ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0335 2011 Nissan Rogue indicates Crankshaft Position Sensor Circuit.
Common causes
Common causes include Faulty crankshaft position sensor, Damaged or corroded wiring/connectors in the sensor circuit, Issues with the ECM.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Aug 30, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0335 2011 Nissan Rogue Description

The P0335 diagnostic trouble code (DTC) for a 2011 Nissan Rogue indicates a problem with the crankshaft position sensor circuit. The crankshaft position sensor is a vital component that monitors the position and speed of the crankshaft in the engine. This information is crucial for the engine control module (ECM) to accurately control ignition timing and fuel injection.

OBDII Code P0335 2011 Nissan Rogue - Crankshaft Position Sensor Circuit
P0335 2011 Nissan Rogue Code - Crankshaft Position Sensor Circuit

Common Causes of P0335 2011 Nissan Rogue

  1. Faulty crankshaft position sensor
  2. Damaged or corroded wiring/connectors in the sensor circuit
  3. Issues with the ECM
  4. Poor electrical connections
  5. Engine timing belt or chain issues

Symptoms of P0335 2011 Nissan Rogue

  1. Engine misfires or stalling
  2. Rough idling or vibrations
  3. Difficulty starting the engine
  4. Decreased fuel efficiency
  5. Loss of power while driving

How to Fix P0335 2011 Nissan Rogue

  1. Diagnose the issue using a scan tool to confirm the P0335 code and check the sensor's functionality.
  2. Inspect the wiring and connectors for any damage or corrosion. Repair or replace as necessary.
  3. Test the crankshaft position sensor to ensure it is functioning correctly. Replace if defective.
  4. Clear the DTC and reset the ECM to see if the code reappears after repairs.
  5. Perform a road test to verify that the symptoms associated with the code have been resolved.

Cost to Fix P0335 2011 Nissan Rogue

The cost of repairing a P0335 code in a 2011 Nissan Rogue can vary depending on the specific cause of the issue. On average, the cost of replacing a crankshaft position sensor ranges from $100 to $250. Labor costs for this repair can range from $80 to $150 per hour. Additional costs may include diagnostic fees and any necessary parts or repairs. It's recommended to consult with a certified mechanic or auto repair shop for an accurate estimate based on your vehicle's specific needs.

What does this mean?

Tech Notes for P0335 2011 Nissan Rogue

Sometimes and in some models, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replace the battery.

When is the Code Detected?

The crankshaft position sensor (POS) signal is not detected by the Electronic Control Module (ECM) during the first few seconds of engine cranking

Need more information about the P0335 2011 Nissan Rogue code?

Need more information on how to fix the P0335 2011 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0335 2011 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0335 2011 Nissan Rogue Code

1. What are common symptoms of OBDII code P0335 in a 2011 Nissan Rogue?

The common symptoms of code P0335 in a 2011 Nissan Rogue include engine stalling, difficulty starting the engine, and rough idling.

2. What does OBDII code P0335 indicate in a 2011 Nissan Rogue?

Code P0335 in a 2011 Nissan Rogue indicates a problem with the crankshaft position sensor circuit.

3. What are the possible causes of OBDII code P0335 in a 2011 Nissan Rogue?

Possible causes of code P0335 in a 2011 Nissan Rogue include a faulty crankshaft position sensor, damaged wiring or connectors, or a problem with the sensor's alignment.

4. How can I diagnose OBDII code P0335 in my 2011 Nissan Rogue?

Diagnosing code P0335 in a 2011 Nissan Rogue involves checking the crankshaft position sensor's wiring, connectors, and alignment, as well as testing the sensor itself using a multimeter.

5. Can a faulty crankshaft position sensor cause OBDII code P0335 in a 2011 Nissan Rogue?

Yes, a faulty crankshaft position sensor is a common cause of code P0335 in a 2011 Nissan Rogue. It can lead to inaccurate readings and trigger the code.

6. How can I repair OBDII code P0335 in my 2011 Nissan Rogue?

Repairing code P0335 in a 2011 Nissan Rogue typically involves replacing the faulty crankshaft position sensor, repairing any damaged wiring or connectors, and ensuring proper sensor alignment.

7. Is it safe to continue driving with OBDII code P0335 in a 2011 Nissan Rogue?

It is not recommended to continue driving with code P0335 in a 2011 Nissan Rogue as it can lead to engine performance issues, stalling, and potential safety hazards on the road.

8. Can a DIY enthusiast fix OBDII code P0335 in a 2011 Nissan Rogue?

Yes, a DIY enthusiast with the necessary tools and knowledge can attempt to fix code P0335 in a 2011 Nissan Rogue by following repair guides and procedures.

9. How much does it cost to repair OBDII code P0335 in a 2011 Nissan Rogue at a mechanic?

The cost to repair code P0335 in a 2011 Nissan Rogue at a mechanic can vary depending on the exact cause of the issue, but it typically ranges from $150 to $300 for parts and labor.

10. Will resetting the OBDII code P0335 in a 2011 Nissan Rogue make it go away permanently?

Simply resetting the code P0335 in a 2011 Nissan Rogue will not permanently fix the issue. It is essential to diagnose and address the root cause of the problem to prevent the code from reappearing.

Discuss the causes and fixes for P0335 2011 Nissan Rogue OBDII Code

Submit a New Comment

Code P0335 2011 Nissan Rogue comments

No comments found for this page.