Engine-Codes.com
Engine-Codes – Nissan – P0335 2011 Nissan Altima Sedan

P0335 2011 Nissan Altima Sedan Code - Crankshaft Position Sensor Circuit

Quick Answer

The P0335 diagnostic trouble code (DTC) for a 2011 Nissan Altima Sedan relates to the Crankshaft Position Sensor Circuit. Common causes include Faulty crankshaft position sensor, Damaged or corroded wiring in the sensor circuit, Loose or poor electrical connections. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0335 2011 Nissan Altima Sedan indicates Crankshaft Position Sensor Circuit.
Common causes
Common causes include Faulty crankshaft position sensor, Damaged or corroded wiring in the sensor circuit, Loose or poor electrical connections.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Aug 18, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0335 2011 Nissan Altima Sedan Description

The P0335 diagnostic trouble code (DTC) for a 2011 Nissan Altima Sedan relates to the Crankshaft Position Sensor Circuit. This code indicates that there is a malfunction or failure in the circuit that is responsible for monitoring the position and rotational speed of the crankshaft in the engine. The crankshaft position sensor plays a crucial role in the vehicle's ignition system and fuel injection process by providing the engine control module (ECM) with accurate data on the crankshaft's position, allowing for precise timing of the ignition and fuel injection events.

OBDII Code P0335 2011 Nissan Altima Sedan - Crankshaft Position Sensor Circuit
P0335 2011 Nissan Altima Sedan Code - Crankshaft Position Sensor Circuit

Common Causes of P0335 2011 Nissan Altima Sedan

  1. Faulty crankshaft position sensor
  2. Damaged or corroded wiring in the sensor circuit
  3. Loose or poor electrical connections
  4. Issues with the ECM
  5. Excessive wear or damage to the crankshaft position sensor

Symptoms of P0335 2011 Nissan Altima Sedan

  1. Engine misfires or rough idling
  2. Stalling or difficulty starting the engine
  3. Decreased fuel efficiency
  4. Check Engine Light illuminated on the dashboard

How to Fix P0335 2011 Nissan Altima Sedan

  1. Diagnose the issue by using an OBD-II scanner to confirm the P0335 code and inspecting the crankshaft position sensor and its wiring.
  2. Replace the faulty crankshaft position sensor if it is determined to be the cause of the issue.
  3. Repair or replace any damaged or corroded wiring in the sensor circuit.
  4. Ensure all electrical connections are secure and properly connected.
  5. Clear the DTC with an OBD-II scanner and test drive the vehicle to verify that the issue has been resolved.

Cost to Fix P0335 2011 Nissan Altima Sedan

The typical repair costs for addressing a P0335 code in a 2011 Nissan Altima Sedan can vary depending on the specific cause of the issue. Generally, the cost of replacing a crankshaft position sensor ranges from $100 to $300, including parts and labor. However, additional costs may apply if there are other underlying issues contributing to the code. It's recommended to consult with a professional mechanic to get an accurate estimate based on the specific circumstances of the vehicle. Labor rates at auto repair shops typically range from $80 to $150 per hour, but may vary based on location and the type of repair facility.

What does this mean?

Tech Notes for P0335 2011 Nissan Altima Sedan

Sometimes and in some models, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replace the battery.

When is the Code Detected?

The crankshaft position sensor (POS) signal is not detected by the Electronic Control Module (ECM) during the first few seconds of engine cranking

Need more information about the P0335 2011 Nissan Altima Sedan code?

Need more information on how to fix the P0335 2011 Nissan Altima Sedan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0335 2011 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0335 2011 Nissan Altima Sedan Code

1. What are the common symptoms of OBDII code P0335 in a 2011 Nissan Altima Sedan?

The common symptoms of code P0335 in a 2011 Nissan Altima Sedan include engine stalling, rough idling, difficulty starting the engine, and a decrease in fuel efficiency.

2. What does OBDII code P0335 indicate in a 2011 Nissan Altima Sedan?

Code P0335 in a 2011 Nissan Altima Sedan indicates a problem with the crankshaft position sensor circuit.

3. What are the possible causes of OBDII code P0335 in a 2011 Nissan Altima Sedan?

Possible causes of code P0335 in a 2011 Nissan Altima Sedan include a faulty crankshaft position sensor, damaged sensor wiring, or issues with the sensor's connection.

4. How can I diagnose the crankshaft position sensor circuit issue in my 2011 Nissan Altima Sedan with code P0335?

To diagnose the issue, you can use a multimeter to test the crankshaft position sensor for proper resistance and voltage output. Check the sensor wiring for any visible damage or corrosion as well.

5. Can I continue driving my 2011 Nissan Altima Sedan with OBDII code P0335?

It is not recommended to continue driving your 2011 Nissan Altima Sedan with code P0335, as it can lead to further engine damage and potential safety hazards.

6. How can I repair OBDII code P0335 in my 2011 Nissan Altima Sedan?

The repair for code P0335 in a 2011 Nissan Altima Sedan typically involves replacing the faulty crankshaft position sensor and ensuring proper wiring connections.

7. Will resetting the OBDII code P0335 in my 2011 Nissan Altima Sedan fix the issue?

Resetting the code may temporarily turn off the check engine light, but if the underlying issue with the crankshaft position sensor circuit is not addressed, the code is likely to reappear.

8. Is it possible to bypass the crankshaft position sensor in a 2011 Nissan Altima Sedan to clear OBDII code P0335?

Bypassing the crankshaft position sensor is not recommended, as it is a critical component for engine timing and performance. It is best to properly diagnose and repair the sensor circuit issue.

9. How much does it cost to replace the crankshaft position sensor in a 2011 Nissan Altima Sedan?

The cost of replacing the crankshaft position sensor in a 2011 Nissan Altima Sedan can vary depending on the sensor's quality and labor costs, but it typically ranges from $100 to $300.

10. Can a DIY enthusiast replace the crankshaft position sensor in a 2011 Nissan Altima Sedan?

Replacing the crankshaft position sensor in a 2011 Nissan Altima Sedan can be a moderately challenging task due to its location and wiring connections. It is recommended to have some experience working on vehicles before attempting this repair.

Discuss the causes and fixes for P0335 2011 Nissan Altima Sedan OBDII Code

Submit a New Comment

Code P0335 2011 Nissan Altima Sedan comments

No comments found for this page.