Engine-Codes.com
Engine-Codes – Nissan – P0335 2010 Nissan Xterra

P0335 2010 Nissan Xterra Code - Crankshaft Position Sensor Circuit

Quick Answer

The P0335 code for a 2010 Nissan Xterra refers to a problem with the crankshaft position sensor circuit. Common causes include Faulty crankshaft position sensor, Damaged wiring or connectors in the sensor circuit, Issues with the ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0335 2010 Nissan Xterra indicates Crankshaft Position Sensor Circuit.
Common causes
Common causes include Faulty crankshaft position sensor, Damaged wiring or connectors in the sensor circuit, Issues with the ECM.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 11, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0335 2010 Nissan Xterra Description

The P0335 code for a 2010 Nissan Xterra refers to a problem with the crankshaft position sensor circuit. The crankshaft position sensor is a vital component of the vehicle's engine management system. It is responsible for monitoring the rotational speed and position of the crankshaft, which is crucial for the engine to operate correctly. The sensor sends this information to the engine control module (ECM) to determine ignition timing and fuel injection.

OBDII Code P0335 2010 Nissan Xterra - Crankshaft Position Sensor Circuit
P0335 2010 Nissan Xterra Code - Crankshaft Position Sensor Circuit

Common Causes of P0335 2010 Nissan Xterra

  1. Faulty crankshaft position sensor
  2. Damaged wiring or connectors in the sensor circuit
  3. Issues with the ECM
  4. Poor electrical connections
  5. Sensor getting contaminated with debris or oil

Symptoms of P0335 2010 Nissan Xterra

  1. Engine misfires or hesitations
  2. Rough idling or stalling
  3. Difficulty starting the vehicle
  4. Decreased fuel efficiency
  5. Check Engine Light illuminated on the dashboard

How to Fix P0335 2010 Nissan Xterra

  1. Diagnose the issue by using a scan tool to confirm the P0335 code and check the crankshaft position sensor's functionality.
  2. Inspect the wiring and connectors for any damage or corrosion. Repair or replace any faulty components.
  3. Test the crankshaft position sensor's output signal using a multimeter to ensure it is within the manufacturer's specifications.
  4. If the sensor is faulty, replace it with a new one and clear the trouble codes from the ECM.
  5. Recheck the system to ensure the issue is resolved and test drive the vehicle to confirm proper operation.

Cost to Fix P0335 2010 Nissan Xterra

The cost of repairing a P0335 code on a 2010 Nissan Xterra can vary depending on the specific cause of the issue. On average, replacing a crankshaft position sensor can cost between $100 and $250, including parts and labor. However, additional costs may apply if there are wiring or ECM problems that need to be addressed. It's recommended to consult with a professional mechanic for an accurate estimate based on the specific circumstances of your vehicle. Labor rates at auto repair shops typically range from $80 to $150 per hour, so the final cost will depend on the amount of time required for the repair.

What does this mean?

Tech Notes for P0335 2010 Nissan Xterra

Sometimes and in some models, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replace the battery.



2005 Xterra Crankshaft Position Sensor Replacement









User Submitted Video

When is the Code Detected?

The crankshaft position sensor (POS) signal is not detected by the Electronic Control Module (ECM) during the first few seconds of engine cranking

Need more information about the P0335 2010 Nissan Xterra code?

Need more information on how to fix the P0335 2010 Nissan Xterra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0335 2010 Nissan Xterra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0335 2010 Nissan Xterra Code

1. What are the common symptoms of OBDII code P0335 in a 2010 Nissan Xterra?

- Common symptoms include engine stalling, rough idling, difficulty starting the vehicle, and a decrease in fuel efficiency.

2. What does the OBDII code P0335 indicate in a 2010 Nissan Xterra?

- OBDII code P0335 indicates a problem with the crankshaft position sensor circuit in the 2010 Nissan Xterra.

3. What are the possible causes of OBDII code P0335 in a 2010 Nissan Xterra?

- Possible causes include a faulty crankshaft position sensor, wiring issues in the sensor circuit, sensor alignment issues, or a damaged sensor connector.

4. How can I diagnose the cause of OBDII code P0335 in my 2010 Nissan Xterra?

- To diagnose the issue, you can use a scan tool to read the code, inspect the sensor wiring for damage, check the sensor's alignment, and test the sensor's resistance.

5. Can I still drive my 2010 Nissan Xterra with OBDII code P0335?

- It is not recommended to drive the vehicle with OBDII code P0335, as it can lead to potential engine performance issues and further damage if left unresolved.

6. How can I repair OBDII code P0335 in my 2010 Nissan Xterra?

- Repair options include replacing the crankshaft position sensor, repairing any damaged wiring in the circuit, ensuring the sensor is properly aligned, and clearing the trouble code.

7. Is it possible to reset OBDII code P0335 in a 2010 Nissan Xterra without fixing the issue?

- While you can clear the trouble code using a scan tool, it is essential to address the underlying problem causing OBDII code P0335 to prevent future issues.

8. Will OBDII code P0335 cause permanent damage to my 2010 Nissan Xterra if left untreated?

- Ignoring OBDII code P0335 can lead to potential engine damage over time, as the crankshaft position sensor is crucial for proper engine function and timing.

9. How much does it typically cost to repair OBDII code P0335 in a 2010 Nissan Xterra?

- The cost of repair can vary depending on the cause of the issue, but it generally ranges from $100 to $300 for parts and labor.

10. Can a DIY enthusiast fix OBDII code P0335 in a 2010 Nissan Xterra?

- While some DIY enthusiasts may have the skills to replace the crankshaft position sensor or address wiring issues, it is recommended to consult a professional mechanic for proper diagnosis and repair.

Discuss the causes and fixes for P0335 2010 Nissan Xterra OBDII Code

Submit a New Comment

Code P0335 2010 Nissan Xterra comments

No comments found for this page.