Engine-Codes.com
Engine-Codes – Nissan – P0335 2010 Nissan Rogue

P0335 2010 Nissan Rogue Code - Crankshaft Position Sensor Circuit

Quick Answer

The P0335 diagnostic trouble code (DTC) for a 2010 Nissan Rogue indicates a problem with the crankshaft position sensor circuit. Common causes include Faulty crankshaft position sensor, Damaged or corroded wiring harness, Loose or poor connections in the sensor circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0335 2010 Nissan Rogue indicates Crankshaft Position Sensor Circuit.
Common causes
Common causes include Faulty crankshaft position sensor, Damaged or corroded wiring harness, Loose or poor connections in the sensor circuit.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 13, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0335 2010 Nissan Rogue Description

The P0335 diagnostic trouble code (DTC) for a 2010 Nissan Rogue indicates a problem with the crankshaft position sensor circuit. The crankshaft position sensor is a vital component in the engine management system, as it monitors the position and rotational speed of the crankshaft. This information is crucial for the engine control unit (ECU) to determine the ignition timing and fuel injection timing.

OBDII Code P0335 2010 Nissan Rogue - Crankshaft Position Sensor Circuit
P0335 2010 Nissan Rogue Code - Crankshaft Position Sensor Circuit

Common Causes of P0335 2010 Nissan Rogue

  1. Faulty crankshaft position sensor
  2. Damaged or corroded wiring harness
  3. Loose or poor connections in the sensor circuit
  4. Issues with the ECU
  5. Engine timing belt or chain issues

Symptoms of P0335 2010 Nissan Rogue

  1. Engine misfires
  2. Hesitation or lack of power during acceleration
  3. Rough idling or stalling
  4. Difficulty starting the engine
  5. Reduced fuel efficiency

How to Fix P0335 2010 Nissan Rogue

  1. Diagnose the issue by using a scan tool to confirm the P0335 code and check the sensor's signal.
  2. Inspect the wiring harness and connectors for any damage or corrosion. Repair or replace as necessary.
  3. Test the crankshaft position sensor for proper operation. Replace if faulty.
  4. Clear the DTC and test drive the vehicle to ensure the issue has been resolved.
  5. If the problem persists, further diagnostics may be required to identify any underlying issues with the engine or ECU.

Cost to Fix P0335 2010 Nissan Rogue

The cost of repairing a P0335 code on a 2010 Nissan Rogue can vary depending on the specific cause of the issue. On average, the cost of replacing a crankshaft position sensor ranges from $100 to $250, including parts and labor. However, additional costs may apply if there are other underlying problems that need to be addressed. It's recommended to consult with a qualified mechanic or auto repair shop to get an accurate estimate based on the specific circumstances of your vehicle. Keep in mind that labor rates can vary between different locations and types of repair facilities.

What does this mean?

Tech Notes for P0335 2010 Nissan Rogue

Sometimes and in some models, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replace the battery.



When is the Code Detected?

The crankshaft position sensor (POS) signal is not detected by the Electronic Control Module (ECM) during the first few seconds of engine cranking

Need more information about the P0335 2010 Nissan Rogue code?

Need more information on how to fix the P0335 2010 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0335 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0335 2010 Nissan Rogue Code

1. What are the common symptoms of OBDII code P0335 in a 2010 Nissan Rogue?

The common symptoms of code P0335 in a 2010 Nissan Rogue include engine stalling, rough idling, difficulty starting the engine, and a decrease in fuel efficiency.

2. What does OBDII code P0335 indicate in a 2010 Nissan Rogue?

Code P0335 in a 2010 Nissan Rogue indicates a problem with the crankshaft position sensor circuit.

3. What are the possible causes of OBDII code P0335 in a 2010 Nissan Rogue?

Possible causes of code P0335 in a 2010 Nissan Rogue include a faulty crankshaft position sensor, damaged sensor wiring, poor electrical connections, or a problem with the sensor's tone ring.

4. How can I diagnose the issue related to OBDII code P0335 in my 2010 Nissan Rogue?

To diagnose code P0335 in a 2010 Nissan Rogue, you can use a scan tool to check for related trouble codes, visually inspect the sensor and wiring for damage, and perform electrical tests to determine the root cause.

5. Can a faulty crankshaft position sensor cause code P0335 in a 2010 Nissan Rogue?

Yes, a faulty crankshaft position sensor is a common cause of OBDII code P0335 in a 2010 Nissan Rogue, as the sensor is essential for providing accurate engine timing information.

6. What are the repair options for resolving OBDII code P0335 in a 2010 Nissan Rogue?

Repair options for code P0335 in a 2010 Nissan Rogue include replacing the faulty crankshaft position sensor, repairing damaged wiring, ensuring proper electrical connections, and resetting the trouble codes.

7. Is it safe to continue driving my 2010 Nissan Rogue with OBDII code P0335?

It is not recommended to drive your 2010 Nissan Rogue with code P0335, as the issue can lead to further engine problems, reduced performance, and potential safety hazards.

8. Can a DIY enthusiast fix OBDII code P0335 in a 2010 Nissan Rogue?

A DIY enthusiast with the necessary tools and skills can attempt to fix code P0335 in a 2010 Nissan Rogue by following proper diagnostic procedures and replacing the faulty components.

9. How important is the crankshaft position sensor in a 2010 Nissan Rogue?

The crankshaft position sensor is crucial in a 2010 Nissan Rogue as it helps the engine control unit determine the precise position of the crankshaft for optimal engine performance and timing.

10. Will resetting the trouble codes clear OBDII code P0335 in a 2010 Nissan Rogue?

Resetting the trouble codes may temporarily clear code P0335 in a 2010 Nissan Rogue, but if the underlying issue with the crankshaft position sensor circuit is not fixed, the code is likely to reappear.

Discuss the causes and fixes for P0335 2010 Nissan Rogue OBDII Code

Submit a New Comment

Code P0335 2010 Nissan Rogue comments

No comments found for this page.