Engine-Codes.com
Engine-Codes – Nissan – P0335 2010 Nissan Pathfinder

P0335 2010 Nissan Pathfinder Code - Crankshaft Position Sensor Circuit

Quick Answer

The P0335 code for a 2010 Nissan Pathfinder indicates a problem with the Crankshaft Position Sensor Circuit. Common causes include Faulty sensor: The sensor itself may be malfunctioning, sending incorrect signals to the ECM, Damaged wiring: The wiring connecting the sensor to the ECM could be damaged or broken, leading to intermittent signal transmission, Poor connection: A loose or corroded connection between the sensor and the ECM can disrupt the signal. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0335 2010 Nissan Pathfinder indicates Crankshaft Position Sensor Circuit.
Common causes
Common causes include Faulty sensor: The sensor itself may be malfunctioning, sending incorrect signals to the ECM, Damaged wiring: The wiring connecting the sensor to the ECM could be damaged or broken, leading to intermittent signal transmission, Poor connection: A loose or corroded connection between the sensor and the ECM can disrupt the signal.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 09, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0335 2010 Nissan Pathfinder Description

The P0335 code for a 2010 Nissan Pathfinder indicates a problem with the Crankshaft Position Sensor Circuit. The crankshaft position sensor is a vital component in the engine management system, as it detects the position of the crankshaft and sends this information to the engine control module (ECM). This data is crucial for proper ignition timing and fuel injection, ensuring that the engine runs smoothly.

OBDII Code P0335 2010 Nissan Pathfinder - Crankshaft Position Sensor Circuit
P0335 2010 Nissan Pathfinder Code - Crankshaft Position Sensor Circuit

Common Causes of P0335 2010 Nissan Pathfinder

  1. Faulty sensor: The sensor itself may be malfunctioning, sending incorrect signals to the ECM.
  2. Damaged wiring: The wiring connecting the sensor to the ECM could be damaged or broken, leading to intermittent signal transmission.
  3. Poor connection: A loose or corroded connection between the sensor and the ECM can disrupt the signal.
  4. Sensor alignment: If the sensor is not properly aligned with the crankshaft, it may not be able to detect its position accurately.
  5. ECM issues: Problems with the engine control module can also result in the P0335 code being triggered.

Symptoms of P0335 2010 Nissan Pathfinder

  1. Engine misfires: The incorrect signal from the crankshaft position sensor can lead to misfires, which can cause the engine to run rough or even stall.
  2. Rough idling: A malfunctioning sensor can result in erratic engine idling, where the engine speed fluctuates unexpectedly.
  3. Stalling: If the ECM is not receiving accurate data from the sensor, it may cause the engine to stall while driving or at idle.
  4. Difficulty starting: A faulty crankshaft position sensor can make it harder to start the engine, leading to prolonged cranking or even no start condition.

How to Fix P0335 2010 Nissan Pathfinder

  1. Diagnose the issue: Use a diagnostic tool to confirm the P0335 code and identify the exact cause of the problem.
  2. Inspect the sensor: Check the condition of the crankshaft position sensor and replace it if necessary.
  3. Check wiring and connections: Inspect the wiring harness for any damage or loose connections, repairing or replacing as needed.
  4. Reset the ECM: Clear the fault code from the ECM and reset the system to see if the issue persists.
  5. Test drive: After completing the repairs, test drive the vehicle to ensure that the engine runs smoothly and that the code does not reappear.

Cost to Fix P0335 2010 Nissan Pathfinder

The cost of repairing a P0335 code on a 2010 Nissan Pathfinder can vary depending on the root cause of the issue. A new crankshaft position sensor typically costs between $50 and $150, while the labor cost for the repair can range from $100 to $200. In total, the repair could cost anywhere from $150 to $350, excluding any additional diagnostic fees. It's important to note that prices can vary based on location, the specific repair shop, and any additional parts or labor required. It's advisable to consult with a professional mechanic for a more accurate estimate.

What does this mean?

Tech Notes for P0335 2010 Nissan Pathfinder

Sometimes and in some models, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replace the battery.

When is the Code Detected?

The crankshaft position sensor (POS) signal is not detected by the Electronic Control Module (ECM) during the first few seconds of engine cranking

Need more information about the P0335 2010 Nissan Pathfinder code?

Need more information on how to fix the P0335 2010 Nissan Pathfinder code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0335 2010 Nissan Pathfinder code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0335 2010 Nissan Pathfinder Code

1. What does the OBDII code P0335 mean on a 2010 Nissan Pathfinder?

P0335 indicates an issue with the crankshaft position sensor circuit, which means the Engine Control Module (ECM) is not receiving proper signals from the sensor.

2. What are the symptoms of a P0335 code on a 2010 Nissan Pathfinder?

Common symptoms include difficulty starting the engine, engine stalling, poor acceleration, rough idling, and the Check Engine Light turning on.

3. What causes the P0335 code to appear on my 2010 Nissan Pathfinder?

Possible causes include a faulty crankshaft position sensor, damaged wiring or connectors in the sensor circuit, a failed ECM, or issues with the timing components.

4. Can I drive my 2010 Nissan Pathfinder with a P0335 code?

Driving with a P0335 code is not recommended as it may lead to stalling, reduced performance, or further engine damage.

5. How do I fix the P0335 code on a 2010 Nissan Pathfinder?

Repairs may include replacing the crankshaft position sensor, repairing or replacing damaged wiring or connectors, or reprogramming or replacing the ECM if necessary.

6. Where is the crankshaft position sensor located on a 2010 Nissan Pathfinder?

The crankshaft position sensor is typically located near the bottom of the engine, close to the crankshaft, often near the transmission bell housing.

7. How much does it cost to fix the P0335 code on a 2010 Nissan Pathfinder?

The cost varies but typically ranges from $150 to $300, including parts and labor, depending on the repair needed.

8. Can a bad crankshaft position sensor cause a no-start condition?

Yes, if the crankshaft position sensor fails completely, the engine may not start because the ECM cannot determine the crankshaft's position.

9. How can I diagnose the P0335 code on my 2010 Nissan Pathfinder?

Diagnosis involves using an OBDII scanner to confirm the code, visually inspecting the sensor and wiring, testing the sensor with a multimeter, and checking for proper signal output.

10. Is it common for the crankshaft position sensor to fail on a 2010 Nissan Pathfinder?

Crankshaft position sensor failure is not uncommon in older vehicles, especially if the sensor has been exposed to heat, oil leaks, or wear over time.

Discuss the causes and fixes for P0335 2010 Nissan Pathfinder OBDII Code

Submit a New Comment