Engine-Codes.com
Engine-Codes – Nissan – P0335 2008 Nissan Sentra

P0335 2008 Nissan Sentra Code - Crankshaft Position Sensor Circuit

Quick Answer

The P0335 code in a 2008 Nissan Sentra indicates a problem with the crankshaft position sensor circuit. Common causes include Faulty crankshaft position sensor, Damaged wiring or connectors, Corrosion in the sensor circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0335 2008 Nissan Sentra indicates Crankshaft Position Sensor Circuit.
Common causes
Common causes include Faulty crankshaft position sensor, Damaged wiring or connectors, Corrosion in the sensor circuit.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 13, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0335 2008 Nissan Sentra Description

The P0335 code in a 2008 Nissan Sentra indicates a problem with the crankshaft position sensor circuit. The crankshaft position sensor is a vital component in the engine management system, as it monitors the position and rotational speed of the crankshaft. This information is crucial for the engine control unit (ECU) to determine the ignition timing and fuel injection timing.

OBDII Code P0335 2008 Nissan Sentra - Crankshaft Position Sensor Circuit
P0335 2008 Nissan Sentra Code - Crankshaft Position Sensor Circuit

Common Causes of P0335 2008 Nissan Sentra

  1. Faulty crankshaft position sensor
  2. Damaged wiring or connectors
  3. Corrosion in the sensor circuit
  4. Issues with the ECU
  5. Poor electrical connections

Symptoms of P0335 2008 Nissan Sentra

  1. Engine misfires
  2. Difficulty starting the engine
  3. Stalling while driving
  4. Decreased fuel efficiency
  5. Rough idling or hesitation during acceleration

How to Fix P0335 2008 Nissan Sentra

  1. Begin by locating the crankshaft position sensor in the engine bay.
  2. Inspect the sensor, wiring, and connectors for any visible damage or corrosion.
  3. Test the sensor using a multimeter to check for proper resistance and voltage output.
  4. If the sensor is faulty, replace it with a new one following the manufacturer's instructions.
  5. Clear the diagnostic trouble codes and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P0335 2008 Nissan Sentra

The typical repair costs for a P0335 code in a 2008 Nissan Sentra can range from $100 to $300, including parts and labor. However, it's important to note that specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less. It's advisable to check local rates for a more precise estimate.

What does this mean?

Tech Notes for P0335 2008 Nissan Sentra

Sometimes and in some models, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replace the battery.

When is the Code Detected?

The crankshaft position sensor (POS) signal is not detected by the Electronic Control Module (ECM) during the first few seconds of engine cranking

Need more information about the P0335 2008 Nissan Sentra code?

Need more information on how to fix the P0335 2008 Nissan Sentra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0335 2008 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0335 2008 Nissan Sentra Code

1. What are the common symptoms of OBDII code P0335 in a 2008 Nissan Sentra?

The common symptoms of code P0335 on a 2008 Nissan Sentra include engine stalling, difficulty starting the engine, and poor acceleration.

2. What is the main cause of OBDII code P0335 in a 2008 Nissan Sentra?

The main cause of code P0335 in a 2008 Nissan Sentra is often a faulty crankshaft position sensor or issues with the sensor circuit.

3. How can I diagnose a faulty crankshaft position sensor in my 2008 Nissan Sentra?

To diagnose a faulty crankshaft position sensor in your 2008 Nissan Sentra, you can use a multimeter to check the sensor's resistance and voltage output, as well as inspect the sensor for physical damage.

4. Can a bad crankshaft position sensor cause OBDII code P0335 in a 2008 Nissan Sentra?

Yes, a malfunctioning or failed crankshaft position sensor can trigger OBDII code P0335 in a 2008 Nissan Sentra due to the sensor's crucial role in engine timing and operation.

5. What are some repair tips for fixing OBDII code P0335 in a 2008 Nissan Sentra?

Repair tips for addressing code P0335 on a 2008 Nissan Sentra include replacing the crankshaft position sensor, checking and repairing any damaged wiring or connectors in the sensor circuit, and performing a thorough inspection of related components.

6. Can a DIY enthusiast fix OBDII code P0335 on a 2008 Nissan Sentra?

A DIY enthusiast can potentially fix code P0335 on a 2008 Nissan Sentra by replacing the crankshaft position sensor and conducting basic diagnostic tests, but complex electrical issues may require professional assistance.

7. Is it safe to continue driving with OBDII code P0335 in a 2008 Nissan Sentra?

It is not recommended to continue driving with OBDII code P0335 in a 2008 Nissan Sentra as it can lead to more severe engine problems, such as complete engine failure or further damage to engine components.

8. How much does it typically cost to repair OBDII code P0335 in a 2008 Nissan Sentra?

The cost to repair OBDII code P0335 in a 2008 Nissan Sentra can vary depending on the extent of the issue, but it generally ranges from $100 to $300 for parts and labor.

9. Are there any recalls or technical service bulletins related to OBDII code P0335 in a 2008 Nissan Sentra?

It's advisable to check with Nissan or a certified dealership for any recalls or technical service bulletins related to OBDII code P0335 in a 2008 Nissan Sentra, as manufacturers may provide assistance for known issues.

10. How long does it typically take to repair OBDII code P0335 in a 2008 Nissan Sentra?

The repair time for OBDII code P0335 in a 2008 Nissan Sentra can vary based on the extent of the issue and the technician's expertise, but it usually takes around 1-2 hours to complete the repair.

Discuss the causes and fixes for P0335 2008 Nissan Sentra OBDII Code

Submit a New Comment

Code P0335 2008 Nissan Sentra comments

No comments found for this page.