Engine-Codes.com
Engine-Codes – Nissan – P0335 2008 Nissan Altima Sedan

P0335 2008 Nissan Altima Sedan Code - Crankshaft Position Sensor Circuit

Quick Answer

The P0335 diagnostic trouble code (DTC) for a 2008 Nissan Altima Sedan indicates a problem with the Crankshaft Position Sensor Circuit. Common causes include Faulty crankshaft position sensor, Damaged wiring or connectors in the sensor circuit, Corrosion or contamination affecting sensor performance. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0335 2008 Nissan Altima Sedan indicates Crankshaft Position Sensor Circuit.
Common causes
Common causes include Faulty crankshaft position sensor, Damaged wiring or connectors in the sensor circuit, Corrosion or contamination affecting sensor performance.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 11, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0335 2008 Nissan Altima Sedan Description

The P0335 diagnostic trouble code (DTC) for a 2008 Nissan Altima Sedan indicates a problem with the Crankshaft Position Sensor Circuit. The crankshaft position sensor is an essential component of the engine management system, responsible for monitoring the position and speed of the crankshaft. This information is crucial for the engine control unit (ECU) to accurately determine ignition timing and fuel injection timing.

OBDII Code P0335 2008 Nissan Altima Sedan - Crankshaft Position Sensor Circuit
P0335 2008 Nissan Altima Sedan Code - Crankshaft Position Sensor Circuit

Common Causes of P0335 2008 Nissan Altima Sedan

  1. Faulty crankshaft position sensor
  2. Damaged wiring or connectors in the sensor circuit
  3. Corrosion or contamination affecting sensor performance
  4. Issues with the ECU or related components
  5. Improper installation or mounting of the sensor

Symptoms of P0335 2008 Nissan Altima Sedan

  1. Engine misfires or rough idling
  2. Difficulty starting the engine
  3. Reduced fuel efficiency
  4. Engine stalling or hesitation during acceleration
  5. Illumination of the check engine light

How to Fix P0335 2008 Nissan Altima Sedan

  1. Perform a diagnostic scan to confirm the P0335 code and identify the specific issue.
  2. Inspect the crankshaft position sensor, wiring, and connectors for any visible damage or corrosion.
  3. Test the sensor using a multimeter to check for proper voltage and resistance readings.
  4. Replace the crankshaft position sensor if it is found to be faulty or malfunctioning.
  5. Clear the DTC codes and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P0335 2008 Nissan Altima Sedan

The typical repair costs for addressing a P0335 code on a 2008 Nissan Altima Sedan can range from $100 to $300, depending on the cost of the replacement sensor and the labor involved. It's important to note that the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It's advisable to check local rates for a more precise estimate.

What does this mean?

Tech Notes for P0335 2008 Nissan Altima Sedan

Sometimes and in some models, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replace the battery.

When is the Code Detected?

The crankshaft position sensor (POS) signal is not detected by the Electronic Control Module (ECM) during the first few seconds of engine cranking

Need more information about the P0335 2008 Nissan Altima Sedan code?

Need more information on how to fix the P0335 2008 Nissan Altima Sedan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0335 2008 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0335 2008 Nissan Altima Sedan Code

1. What are the common symptoms of OBDII code P0335 in a 2008 Nissan Altima Sedan?

- Common symptoms include difficulty starting the vehicle, rough idling, stalling, and decreased fuel efficiency.

2. What can cause the OBDII code P0335 to trigger in a 2008 Nissan Altima Sedan?

- The main cause is a malfunctioning crankshaft position sensor or an issue with the sensor's wiring or connection.

3. How does a faulty crankshaft position sensor affect the performance of a 2008 Nissan Altima Sedan?

- A faulty sensor can lead to inaccurate engine timing, misfiring, and potentially cause the engine to stall while driving.

4. Can a DIY enthusiast replace the crankshaft position sensor in a 2008 Nissan Altima Sedan?

- Yes, replacing the sensor is a relatively straightforward task that can be done with basic tools, following a repair manual or online guides.

5. Are there any tips for diagnosing the cause of OBDII code P0335 in a 2008 Nissan Altima Sedan?

- It's recommended to perform a visual inspection of the sensor and its wiring, check for any loose connections, and use a multimeter to test the sensor's functionality.

6. Is it safe to drive a 2008 Nissan Altima Sedan with OBDII code P0335?

- It's not recommended to drive the vehicle with this code present, as it can lead to further engine issues and potential safety hazards.

7. How much does it typically cost to repair OBDII code P0335 in a 2008 Nissan Altima Sedan?

- The cost can vary depending on the labor rates and parts prices, but generally, the repair can range from $100 to $300, including parts and labor.

8. Can a faulty crankshaft position sensor cause other OBDII codes to appear in a 2008 Nissan Altima Sedan?

- Yes, a faulty sensor can cause related codes such as P0336 (Crankshaft Position Sensor A Circuit Range/Performance) or P0337 (Crankshaft Position Sensor A Circuit Low Input) to appear.

9. Will replacing the crankshaft position sensor automatically clear OBDII code P0335 in a 2008 Nissan Altima Sedan?

- After replacing the sensor, the code may need to be cleared using an OBDII scanner to reset the vehicle's computer and turn off the check engine light.

10. How long does it take to replace the crankshaft position sensor in a 2008 Nissan Altima Sedan?

- The replacement process typically takes around 1-2 hours, but this can vary based on the individual's skill level and access to tools.

Discuss the causes and fixes for P0335 2008 Nissan Altima Sedan OBDII Code

Submit a New Comment

Code P0335 2008 Nissan Altima Sedan comments

No comments found for this page.