P0335 2007 Nissan Maxima Code - Crankshaft Position Sensor Circuit
Quick Answer
The P0335 code for a 2007 Nissan Maxima indicates a problem with the crankshaft position sensor circuit. Common causes include Faulty crankshaft position sensor, Wiring or connector issues in the sensor circuit, Sensor misalignment or incorrect installation. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2007 Nissan Maxima indicates Crankshaft Position Sensor Circuit.
- Common causes
- Common causes include Faulty crankshaft position sensor, Wiring or connector issues in the sensor circuit, Sensor misalignment or incorrect installation.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0335 2007 Nissan Maxima Description
The P0335 code for a 2007 Nissan Maxima indicates a problem with the crankshaft position sensor circuit. The crankshaft position sensor is a vital component of the engine management system, as it detects the position and rotational speed of the crankshaft. This information is crucial for the engine control unit to determine the correct ignition timing and fuel injection timing.
Common Causes of P0335 2007 Nissan Maxima
- Faulty crankshaft position sensor
- Wiring or connector issues in the sensor circuit
- Sensor misalignment or incorrect installation
- Electrical problems such as shorts or open circuits
- Engine control unit malfunction
Symptoms of P0335 2007 Nissan Maxima
- Rough engine operation
- Engine misfires
- Hesitation during acceleration
- Stalling or difficulty starting
- Check engine light illuminated
How to Fix P0335 2007 Nissan Maxima
- Begin by locating the crankshaft position sensor, which is typically near the crankshaft pulley.
- Inspect the sensor, wiring, and connectors for any visible damage or wear.
- Test the sensor using a multimeter to check for proper resistance and voltage output.
- Replace the crankshaft position sensor if it fails the tests or shows signs of damage.
- Clear the diagnostic trouble codes from the engine control unit and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0335 2007 Nissan Maxima
The cost of repairing a P0335 code on a 2007 Nissan Maxima can vary depending on the specific cause of the issue. In general, the price of a new crankshaft position sensor can range from $50 to $150, depending on the brand and quality. Labor costs for this repair can range from $100 to $300, depending on the shop's hourly rates and the complexity of the repair. Overall, the total cost for addressing a P0335 code may range from $150 to $450. It is recommended to consult with a trusted mechanic or auto repair shop for a more accurate estimate based on your specific situation.
Tech Notes for P0335 2007 Nissan Maxima
When is the Code Detected?
Need more information about the P0335 2007 Nissan Maxima code?
Need more information on how to fix the P0335 2007 Nissan Maxima code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2007 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2007 Nissan Maxima Code
1. What does OBDII code P0335 indicate on a 2007 Nissan Maxima?
- Code P0335 indicates that there is a fault in the crankshaft position sensor circuit, suggesting that the sensor or its wiring may be malfunctioning.
2. What are the common symptoms of code P0335 in a 2007 Nissan Maxima?
- Symptoms include difficulty starting the engine, intermittent stalling, rough engine performance, and the Check Engine Light turning on.
3. What can cause the P0335 code to appear on a 2007 Nissan Maxima?
- Possible causes include a faulty crankshaft position sensor, damaged wiring to the sensor, corrosion in the sensor connector, or a malfunctioning Engine Control Module (ECM).
4. How is the P0335 code diagnosed in a 2007 Nissan Maxima?
- Diagnosis involves using a scan tool to confirm the code, visually inspecting the sensor and its connections for damage, and checking the sensor's output with an oscilloscope or multimeter.
5. What are the steps to repair the P0335 code on a 2007 Nissan Maxima?
- Repair steps typically include replacing the crankshaft position sensor, repairing or replacing damaged wiring, cleaning corrosion from connectors, and, if all else fails, replacing the ECM.
6. How critical is it to address the P0335 code in a 2007 Nissan Maxima?
- It is critical to address this code promptly as it can lead to engine performance issues, increased fuel consumption, and potential engine damage from misfires.
7. Can driving a 2007 Nissan Maxima with a P0335 code cause further vehicle damage?
- Yes, driving with this code can cause further damage to the engine due to irregular engine timing, which may lead to increased wear and tear on engine components.
8. What tools are needed to diagnose the P0335 code on a 2007 Nissan Maxima?
- Tools needed include an OBD-II scanner, a digital multimeter, and possibly an oscilloscope to measure the sensor's waveform output.
9. Is it possible for a P0335 code to clear itself in a 2007 Nissan Maxima?
- It is unlikely for the P0335 code to clear itself without addressing the underlying issue, as it typically indicates a hardware failure or electrical problem.
Discuss the causes and fixes for P0335 2007 Nissan Maxima OBDII Code
Code P0335 2007 Nissan Maxima comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.