P0335 2006 Toyota Highlander Code - Crankshaft Position Sensor 'A' Circuit
Quick Answer
The P0335 diagnostic trouble code (DTC) for a 2006 Toyota Highlander specifically relates to the crankshaft position sensor 'A' circuit. Common causes include Faulty crankshaft position sensor, Damaged wiring or connectors related to the sensor, Issues with the ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2006 Toyota Highlander indicates Crankshaft Position Sensor 'A' Circuit .
- Common causes
- Common causes include Faulty crankshaft position sensor, Damaged wiring or connectors related to the sensor, Issues with the ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0335 2006 Toyota Highlander Description
The P0335 diagnostic trouble code (DTC) for a 2006 Toyota Highlander specifically relates to the crankshaft position sensor 'A' circuit. This sensor is crucial for the engine management system as it monitors the position and rotational speed of the crankshaft. The information gathered by the sensor is used by the engine control module to determine ignition timing and fuel injection timing.
Common Causes of P0335 2006 Toyota Highlander
- Faulty crankshaft position sensor
- Damaged wiring or connectors related to the sensor
- Issues with the ECM
- Exposure to heat and vibration
- Electrical issues
Symptoms of P0335 2006 Toyota Highlander
- Rough idling
- Stalling
- Difficulty starting the engine
- Misfiring
- Poor acceleration
How to Fix P0335 2006 Toyota Highlander
- Diagnose the issue by using a scan tool to confirm the P0335 code and perform a visual inspection of the sensor, wiring, and connectors.
- Replace the crankshaft position sensor if it is found to be faulty. Make sure to use a high-quality replacement part.
- Inspect the wiring harness and connectors for any damage or corrosion. Repair or replace as necessary.
- Clear the DTC from the ECM and perform a test drive to ensure the issue has been resolved.
- If the problem persists, further diagnostics may be required to check for any underlying ECM issues.
Cost to Fix P0335 2006 Toyota Highlander
The typical repair costs for addressing a P0335 code on a 2006 Toyota Highlander can range from $150 to $300. This estimate includes the cost of the crankshaft position sensor, any necessary wiring repairs, and labor charges. However, it's important to note that specific diagnosis time and labor rates can vary depending on the location, the make and model of the vehicle, and the type of engine. It's recommended to check with local auto repair shops for more precise estimates.
Tech Notes for P0335 2006 Toyota Highlander
When is the Code Detected?
Need more information about the P0335 2006 Toyota Highlander code?
Need more information on how to fix the P0335 2006 Toyota Highlander code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2006 Toyota Highlander code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2006 Toyota Highlander Code
1. What does the OBDII code P0335 mean on a 2006 Toyota Highlander?
P0335 indicates an issue with the Crankshaft Position Sensor 'A' Circuit, meaning the engine control module (ECM) is not receiving a proper signal from the sensor.
2. What are the symptoms of a P0335 code on a 2006 Toyota Highlander?
Common symptoms include difficulty starting the engine, rough idling, stalling, reduced engine performance, and the check engine light turning on.
3. What causes a P0335 code on a 2006 Toyota Highlander?
Potential causes include a faulty crankshaft position sensor, damaged wiring or connectors, a failed sensor reluctor ring, or issues with the ECM.
4. How do I fix a P0335 code on my 2006 Toyota Highlander?
Inspect and repair any damaged wiring or connectors, replace the crankshaft position sensor if faulty, and check the reluctor ring for damage or misalignment.
5. Can I drive my 2006 Toyota Highlander with a P0335 code?
Driving with this code is not recommended as it can lead to poor engine performance, stalling, or even complete engine failure, potentially causing unsafe conditions.
6. Where is the crankshaft position sensor located on a 2006 Toyota Highlander?
The crankshaft position sensor is typically located near the bottom of the engine, close to the crankshaft pulley or flywheel.
7. How much does it cost to fix a P0335 code on a 2006 Toyota Highlander?
The cost to replace a crankshaft position sensor typically ranges from $150 to $300, depending on parts and labor rates in your area.
8. Can a dead battery cause a P0335 code on a 2006 Toyota Highlander?
While unlikely, a weak or dead battery can sometimes cause electrical issues that may trigger this code. Ensure the battery and charging system are in good condition.
9. How do I diagnose a P0335 code on a 2006 Toyota Highlander?
Use an OBDII scanner to confirm the code, inspect the crankshaft position sensor and its wiring for visible damage, and test the sensor with a multimeter to verify functionality.
10. Will clearing the P0335 code fix the issue on my 2006 Toyota Highlander?
Clearing the code may temporarily turn off the check engine light, but the issue will persist until the underlying problem is properly addressed.
Discuss the causes and fixes for P0335 2006 Toyota Highlander OBDII Code
Code P0335 2006 Toyota Highlander comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.