P0335 2006 Nissan Pathfinder Code - Crankshaft Position Sensor Circuit
Quick Answer
The P0335 diagnostic trouble code (DTC) in a 2006 Nissan Pathfinder indicates a problem with the crankshaft position sensor circuit. Common causes include Damaged or frayed wiring leading to the crankshaft position sensor, Loose or corroded electrical connections, Faulty ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2006 Nissan Pathfinder indicates Crankshaft Position Sensor Circuit.
- Common causes
- Common causes include Damaged or frayed wiring leading to the crankshaft position sensor, Loose or corroded electrical connections, Faulty ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0335 2006 Nissan Pathfinder Description
The P0335 diagnostic trouble code (DTC) in a 2006 Nissan Pathfinder indicates a problem with the crankshaft position sensor circuit. The crankshaft position sensor is a vital component that monitors the rotational speed and position of the crankshaft, providing crucial data to the engine control module (ECM) for proper ignition timing and fuel injection. When this sensor malfunctions or fails, it can lead to a range of issues that affect the vehicle's performance, drivability, and fuel efficiency.
Common Causes of P0335 2006 Nissan Pathfinder
- Damaged or frayed wiring leading to the crankshaft position sensor
- Loose or corroded electrical connections
- Faulty ECM
- Sensor wiring harness issues
- Sensor itself is faulty
Symptoms of P0335 2006 Nissan Pathfinder
- Check engine light illuminated on the dashboard
- Engine misfires or hesitation
- Rough idling or stalling
- Difficulty starting the engine
- Poor acceleration or loss of power
How to Fix P0335 2006 Nissan Pathfinder
- Begin by diagnosing the exact cause of the P0335 code using a scan tool to pinpoint the issue.
- Inspect the wiring harness and connections leading to the crankshaft position sensor for any damage or corrosion. Repair or replace as needed.
- Test the crankshaft position sensor using a multimeter to check for proper functionality. Replace the sensor if it is faulty.
- Clear the code from the ECM's memory using the scan tool and test drive the vehicle to ensure the issue has been resolved.
- If the problem persists, further diagnosis may be necessary to identify any underlying issues with the ECM or other related components.
Cost to Fix P0335 2006 Nissan Pathfinder
The cost of repairing a P0335 code in a 2006 Nissan Pathfinder can vary depending on the specific cause of the issue. In general, replacing a faulty crankshaft position sensor can cost between $50 and $200, while addressing wiring or connection issues may range from $100 to $300. Labor costs at auto repair shops typically range from $80 to $150 per hour, with additional charges for diagnostic time and any necessary parts. It is recommended to consult with a professional mechanic for a more accurate estimate based on the specific circumstances of the vehicle.
Tech Notes for P0335 2006 Nissan Pathfinder
When is the Code Detected?
Need more information about the P0335 2006 Nissan Pathfinder code?
Need more information on how to fix the P0335 2006 Nissan Pathfinder code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2006 Nissan Pathfinder code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2006 Nissan Pathfinder Code
1. What are the common symptoms of OBDII code P0335 in a 2006 Nissan Pathfinder?
- Common symptoms include stalling, rough idling, difficulty starting the engine, and potential loss of power while driving.
2. What does OBDII code P0335 indicate in a 2006 Nissan Pathfinder?
- OBDII code P0335 in a 2006 Nissan Pathfinder indicates a problem with the crankshaft position sensor circuit.
3. What are some possible causes of OBDII code P0335 in a 2006 Nissan Pathfinder?
- Possible causes include a faulty crankshaft position sensor, damaged sensor wiring, loose connections, or issues with the sensor's signal to the ECU.
4. How can I diagnose the cause of OBDII code P0335 in my 2006 Nissan Pathfinder?
- You can diagnose the issue by checking the sensor's wiring for damage, inspecting the connections for looseness, and testing the sensor's output signal using a multimeter.
5. Can I continue driving my 2006 Nissan Pathfinder with OBDII code P0335?
- It is not recommended to continue driving with OBDII code P0335 as it can lead to engine performance issues and potential further damage if left unresolved.
6. How can I repair OBDII code P0335 in a 2006 Nissan Pathfinder?
- To repair OBDII code P0335, you may need to replace the crankshaft position sensor, repair any damaged wiring, secure loose connections, and clear the error code from the ECU.
7. Will resetting the ECU clear OBDII code P0335 in my 2006 Nissan Pathfinder?
- Resetting the ECU may temporarily clear the error code, but if the underlying issue with the crankshaft position sensor circuit is not resolved, the code is likely to reappear.
8. How much does it typically cost to repair OBDII code P0335 in a 2006 Nissan Pathfinder?
- The cost of repairing OBDII code P0335 can vary depending on the cause of the issue, but it may range from $100 to $300 for parts and labor.
9. Can a DIY enthusiast repair OBDII code P0335 in a 2006 Nissan Pathfinder?
- Yes, a DIY enthusiast with the necessary tools and knowledge can attempt to repair OBDII code P0335 by following a detailed repair guide specific to the 2006 Nissan Pathfinder.
10. Is it common for the crankshaft position sensor to fail in a 2006 Nissan Pathfinder?
- While not extremely common, the crankshaft position sensor can fail in a 2006 Nissan Pathfinder due to normal wear and tear or electrical issues over time.
Discuss the causes and fixes for P0335 2006 Nissan Pathfinder OBDII Code
-
I did replaced the two CKP sensor but still have the problem it was running for about 45 ml and motor stop. What is next. I did replaced the starter motor two months ago.
-
There is only one (1) "Crankshaft Position Sensor" and two (2) "Camshaft Position Sensors".
The P0335 code is for the "Crankshaft Position Sensor", is it possible that you replaced the "Camshaft Position Sensors" instead of the "Crankshaft Position Sensor"?
-
Yesterday morning my 2006 Pathfinder (240,000 miles) took a few extra seconds to start up. That has never happened before.
As I started down the road, the CEL came on as well as the VDC and SKID lights, all at once. The CEL codes were P0335 (crankshaft POS sensor), P0011 (camshaft sensor 1), and P0021 (camshaft sensor 2). I think the 0011 and 0021 codes are a "false positive" from the 0335 fault.
Later that afternoon it took nearly 5 minutes for the engine to start. The battery obviously had plenty of cranking power, so I'm ruling that simple explanation out. Any other thoughts before I pull the sensor?
-
With a hard start and the P0335 code, you probably have a bad Crankshaft Position Sensor. Since you also have the P0011 and P0021 codes, there is a small chance that low or dirty engine oil could also be the cause of the problem. When was the last time you check or change the engine oil?
-
Changed oil and filter this past December. I do it every 6 months (~5000 miles).
-
How is the engine oil level?
I would start with an oil change, it's been almost 6 months, so you will need an oil change soon anyways. -
The Crankshaft Position Sensor (CPS) of my 2003 Nissan Pathfinder SE was extremely easy to change. I hope this solves the problem.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.