Engine-Codes.com
Engine-Codes – Nissan – P0335 2005 Nissan Maxima

P0335 2005 Nissan Maxima Code - Crankshaft Position Sensor Circuit

Quick Answer

The P0335 diagnostic trouble code (DTC) indicates a problem with the crankshaft position sensor circuit in a 2005 Nissan Maxima. Common causes include Faulty crankshaft position sensor, Damaged or corroded sensor wiring, Poor electrical connections. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0335 2005 Nissan Maxima indicates Crankshaft Position Sensor Circuit.
Common causes
Common causes include Faulty crankshaft position sensor, Damaged or corroded sensor wiring, Poor electrical connections.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Aug 30, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0335 2005 Nissan Maxima Description

The P0335 diagnostic trouble code (DTC) indicates a problem with the crankshaft position sensor circuit in a 2005 Nissan Maxima. The crankshaft position sensor is a critical component that monitors the position and speed of the crankshaft, allowing the engine control module (ECM) to accurately control the ignition timing and fuel injection. When the sensor malfunctions or the circuit is disrupted, the ECM may not receive accurate data, leading to issues with engine performance, fuel efficiency, and emissions.

OBDII Code P0335 2005 Nissan Maxima - Crankshaft Position Sensor Circuit
P0335 2005 Nissan Maxima Code - Crankshaft Position Sensor Circuit

Common Causes of P0335 2005 Nissan Maxima

  1. Faulty crankshaft position sensor
  2. Damaged or corroded sensor wiring
  3. Poor electrical connections
  4. Issues with the ECM
  5. Mechanical damage to the crankshaft

Symptoms of P0335 2005 Nissan Maxima

  1. Engine stalling or rough idling
  2. Difficulty starting the engine
  3. Misfiring or hesitation during acceleration
  4. Decreased fuel efficiency
  5. Illumination of the check engine light

How to Fix P0335 2005 Nissan Maxima

  1. Begin by locating the crankshaft position sensor, typically located near the crankshaft pulley or flywheel.
  2. Inspect the sensor and wiring for any visible damage or corrosion. Replace the sensor if necessary.
  3. Check the sensor's electrical connections and ensure they are secure and free of debris.
  4. Clear the DTC from the ECM using a diagnostic tool and test drive the vehicle to verify that the issue has been resolved.
  5. If the problem persists, further diagnostics may be required to identify any underlying issues with the ECM or crankshaft.

Cost to Fix P0335 2005 Nissan Maxima

The typical cost to repair a crankshaft position sensor circuit issue on a 2005 Nissan Maxima can range from $100 to $300, including parts and labor. However, prices may vary depending on the specific diagnosis time, labor rates, and any additional repairs that may be needed. It is recommended to consult with local auto repair shops for a more accurate estimate based on your location and vehicle specifications.

What does this mean?

Tech Notes for P0335 2005 Nissan Maxima

Sometimes and in some models, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replace the battery.

When is the Code Detected?

The crankshaft position sensor (POS) signal is not detected by the Electronic Control Module (ECM) during the first few seconds of engine cranking

Need more information about the P0335 2005 Nissan Maxima code?

Need more information on how to fix the P0335 2005 Nissan Maxima code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0335 2005 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0335 2005 Nissan Maxima Code

1. What are the common symptoms of OBDII code P0335 in a 2005 Nissan Maxima?

- Common symptoms include engine stalling, difficulty starting the engine, rough idling, and a decrease in fuel efficiency.

2. What does the OBDII code P0335 indicate in a 2005 Nissan Maxima?

- OBDII code P0335 indicates a malfunction in the crankshaft position sensor circuit.

3. What are the possible causes of OBDII code P0335 in a 2005 Nissan Maxima?

- Possible causes include a faulty crankshaft position sensor, damaged wiring or connectors in the sensor circuit, or issues with the sensor's alignment or installation.

4. How can I diagnose the cause of OBDII code P0335 in my 2005 Nissan Maxima?

- You can diagnose the issue by checking the sensor's wiring and connectors for damage, testing the sensor's resistance, and ensuring proper alignment and installation.

5. Can I drive my 2005 Nissan Maxima with OBDII code P0335?

- It is not recommended to drive your vehicle with OBDII code P0335 as it can lead to engine performance issues and potential stalling, which can be dangerous.

6. How can I repair OBDII code P0335 in my 2005 Nissan Maxima?

- The repair typically involves replacing the faulty crankshaft position sensor, repairing any damaged wiring or connectors, and ensuring proper sensor alignment and installation.

7. Do I need special tools to fix OBDII code P0335 in my 2005 Nissan Maxima?

- Basic tools such as a wrench or socket set may be needed to access and replace the crankshaft position sensor, but no special tools are typically required for this repair.

8. Can a DIY enthusiast fix OBDII code P0335 in a 2005 Nissan Maxima?

- Yes, a DIY enthusiast with some mechanical knowledge and the right tools can typically replace the crankshaft position sensor and address wiring issues related to OBDII code P0335.

9. How much does it cost to repair OBDII code P0335 in a 2005 Nissan Maxima?

- The cost of repairing OBDII code P0335 can vary depending on the extent of the issue, but typically, the cost ranges from $100 to $300 for parts and labor.

10. Will resetting the OBDII code P0335 in my 2005 Nissan Maxima make it go away permanently?

- Resetting the code may temporarily clear the error, but if the underlying issue, such as a faulty sensor or wiring problem, is not addressed, the code is likely to reappear.

Discuss the causes and fixes for P0335 2005 Nissan Maxima OBDII Code

Submit a New Comment