P0335 2002 Nissan Altima Sedan Code - Crankshaft Position Sensor Circuit
Quick Answer
The P0335 diagnostic trouble code (DTC) for a 2002 Nissan Altima Sedan indicates a problem with the crankshaft position sensor circuit. Common causes include Faulty crankshaft position sensor, Damaged wiring or connectors, Sensor misalignment. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2002 Nissan Altima Sedan indicates Crankshaft Position Sensor Circuit.
- Common causes
- Common causes include Faulty crankshaft position sensor, Damaged wiring or connectors, Sensor misalignment.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0335 2002 Nissan Altima Sedan Description
The P0335 diagnostic trouble code (DTC) for a 2002 Nissan Altima Sedan indicates a problem with the crankshaft position sensor circuit. The crankshaft position sensor is a vital component of the engine management system, as it provides the Engine Control Module (ECM) with data on the position and speed of the crankshaft. This information is crucial for the ECM to accurately control fuel injection, ignition timing, and other engine functions.
Common Causes of P0335 2002 Nissan Altima Sedan
- Faulty crankshaft position sensor
- Damaged wiring or connectors
- Sensor misalignment
- ECM issues
Symptoms of P0335 2002 Nissan Altima Sedan
- Rough idling
- Stalling
- Difficulty starting the engine
- Poor acceleration
- Misfiring
How to Fix P0335 2002 Nissan Altima Sedan
- Disconnect the battery to ensure safety.
- Locate the crankshaft position sensor on the engine.
- Remove the sensor and inspect it for any visible damage.
- Test the sensor's resistance and signal output using a multimeter.
- Replace the sensor if it is found to be faulty, and ensure proper alignment during installation.
Cost to Fix P0335 2002 Nissan Altima Sedan
The typical repair costs for addressing a P0335 code on a 2002 Nissan Altima Sedan can range from $100 to $300, depending on the exact cause of the issue and the cost of parts and labor in your area. It's important to note that diagnostic time and labor rates at auto repair shops can vary, so it's recommended to obtain quotes from multiple sources for a more accurate estimate.
When is the Code Detected?
Need more information about the P0335 2002 Nissan Altima Sedan code?
Need more information on how to fix the P0335 2002 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2002 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2002 Nissan Altima Sedan Code
1. What does the OBDII code P0335 mean on a 2002 Nissan Altima Sedan?
P0335 indicates a malfunction in the Crankshaft Position Sensor circuit, which is responsible for monitoring the crankshaft's position and engine speed.
2. What are the common symptoms of code P0335 in a 2002 Nissan Altima?
Symptoms may include difficulty starting the engine, stalling, rough idling, reduced power, and the Check Engine Light turning on.
3. What causes the P0335 code to appear on a 2002 Nissan Altima?
The code can be triggered by a faulty crankshaft position sensor, damaged wiring or connectors, a failed ECM (engine control module), or issues with the sensor’s reluctor ring.
4. Can a P0335 code cause the car not to start?
Yes, a faulty crankshaft position sensor can prevent the engine from starting because it affects ignition timing and fuel delivery.
5. How do you diagnose the P0335 code on a 2002 Nissan Altima?
Diagnosis typically involves using an OBDII scanner, inspecting the crankshaft position sensor, checking wiring and connectors for damage, and testing the sensor’s resistance with a multimeter.
6. Is it safe to drive a 2002 Nissan Altima with a P0335 code?
It’s not recommended to drive the car with this code active, as it can lead to stalling or further engine damage.
7. How much does it cost to fix a P0335 code on a 2002 Nissan Altima?
Replacing the crankshaft position sensor typically costs $100–$300, including parts and labor, depending on the repair shop.
8. Where is the crankshaft position sensor located on a 2002 Nissan Altima?
The sensor is typically located near the bottom of the engine, close to the crankshaft pulley or flywheel.
9. Can a bad crankshaft position sensor trigger other trouble codes?
Yes, a failing sensor may also trigger related codes like P0340 (Camshaft Position Sensor Circuit) if the ECM cannot synchronize the crankshaft and camshaft positions.
10. What tools are needed to replace the crankshaft position sensor on a 2002 Nissan Altima?
You’ll typically need a jack and jack stands, a socket set, a ratchet, and possibly a torque wrench to replace the sensor.
Discuss the causes and fixes for P0335 2002 Nissan Altima Sedan OBDII Code
Code P0335 2002 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.