Engine-Codes.com
Engine-Codes – Honda – P0335 2000 Honda Civic

P0335 2000 Honda Civic Code - Crankshaft Position Sensor 'A' No Signal

Quick Answer

The P0335 diagnostic trouble code (DTC) for a 2000 Honda Civic indicates that there is a problem with the Crankshaft Position Sensor 'A' not sending a signal to the Engine Control Module (ECM). Common causes include Faulty crankshaft position sensor, Damaged wiring or connectors related to the sensor, Sensor misalignment. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0335 2000 Honda Civic indicates Crankshaft Position Sensor 'A' No Signal.
Common causes
Common causes include Faulty crankshaft position sensor, Damaged wiring or connectors related to the sensor, Sensor misalignment.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 13, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0335 2000 Honda Civic Description

The P0335 diagnostic trouble code (DTC) for a 2000 Honda Civic indicates that there is a problem with the Crankshaft Position Sensor 'A' not sending a signal to the Engine Control Module (ECM). The crankshaft position sensor is a vital component in the engine management system, as it provides the ECM with information about the position and speed of the crankshaft. This information is crucial for proper fuel injection timing and ignition system operation. When the sensor fails to send a signal, the ECM may not be able to determine the correct timing for fuel injection and ignition, leading to poor engine performance, misfires, and potentially stalling.

OBDII Code P0335 2000 Honda Civic - Crankshaft Position Sensor 'A' No Signal
P0335 2000 Honda Civic Code - Crankshaft Position Sensor 'A' No Signal

Common Causes of P0335 2000 Honda Civic

  1. Faulty crankshaft position sensor
  2. Damaged wiring or connectors related to the sensor
  3. Sensor misalignment
  4. ECM software issues
  5. Engine vibrations causing sensor malfunction

Symptoms of P0335 2000 Honda Civic

  1. Engine misfires or rough idling
  2. Difficulty starting the engine
  3. Stalling or hesitation during acceleration
  4. Decreased fuel efficiency
  5. Check Engine Light illuminated on the dashboard

How to Fix P0335 2000 Honda Civic

  1. Begin by locating the crankshaft position sensor on the engine (consult vehicle repair manual if needed).
  2. Inspect the wiring and connectors for any damage or corrosion. Repair or replace as necessary.
  3. Test the sensor using a multimeter to check for proper resistance and signal output.
  4. If the sensor is faulty, replace it with a new OEM or high-quality aftermarket sensor.
  5. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P0335 2000 Honda Civic

The cost of repairing a P0335 code on a 2000 Honda Civic can vary depending on the location, labor rates, and the price of the sensor. On average, the cost of a crankshaft position sensor for a Honda Civic ranges from $50 to $150, while labor costs can range from $100 to $200. Therefore, the total repair cost could be between $150 and $350. It is recommended to contact local auto repair shops for accurate pricing based on your specific circumstances.

What does this mean?

Tech Notes for P0335 2000 Honda Civic

Sometimes and in some models, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replaced battery.

When is the Code Detected?

The crankshaft position sensor (POS) signal is not detected by the Electronic Control Module (ECM) during the first few seconds of engine cranking

Need more information about the P0335 2000 Honda Civic code?

Need more information on how to fix the P0335 2000 Honda Civic code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0335 2000 Honda Civic code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0335 2000 Honda Civic Code

1. What are the common symptoms of OBDII code P0335 on a 2000 Honda Civic?

- Common symptoms include difficulty starting the engine, engine stalling, rough idle, and loss of power while driving.

2. What does the code P0335 on a 2000 Honda Civic indicate?

- OBDII code P0335 indicates a malfunction in the crankshaft position sensor 'A', specifically that there is no signal being received from the sensor.

3. What are the possible causes of OBDII code P0335 on a 2000 Honda Civic?

- Possible causes include a faulty crankshaft position sensor, damaged wiring or connectors related to the sensor, or issues with the sensor's alignment or installation.

4. How can I diagnose the cause of OBDII code P0335 on my 2000 Honda Civic?

- To diagnose the issue, you can perform a visual inspection of the sensor and its wiring, test the sensor's voltage and resistance, and check for any related trouble codes in the system.

5. Can I continue driving my 2000 Honda Civic with OBDII code P0335?

- It is not recommended to continue driving the vehicle with this code as it can lead to potential engine performance issues and further damage if left unresolved.

6. How can I repair OBDII code P0335 on my 2000 Honda Civic?

- The most common repair for this code is to replace the crankshaft position sensor 'A' with a new, high-quality sensor that meets the manufacturer's specifications.

7. Is it possible to reset OBDII code P0335 on a 2000 Honda Civic without fixing the issue?

- While you can clear the code using an OBDII scanner, it is important to address the underlying problem causing the code to prevent further issues with the vehicle.

8. Can a DIY enthusiast replace the crankshaft position sensor on a 2000 Honda Civic?

- Yes, replacing the crankshaft position sensor can be a DIY task for those with some mechanical experience and the necessary tools. However, it is recommended to follow a repair manual or tutorial for guidance.

9. How much does it typically cost to repair OBDII code P0335 on a 2000 Honda Civic?

- The cost of repairing this code can vary depending on the labor rates in your area and the cost of the replacement sensor. On average, the total cost can range from $100 to $300.

10. Will fixing OBDII code P0335 improve the overall performance of my 2000 Honda Civic?

- Yes, resolving OBDII code P0335 by fixing the crankshaft position sensor issue can lead to improved engine performance, smoother idling, and better overall drivability of the vehicle.

Discuss the causes and fixes for P0335 2000 Honda Civic OBDII Code

Submit a New Comment

Code P0335 2000 Honda Civic comments

No comments found for this page.