P0335 1999 Toyota Camry Code - Crankshaft Position Sensor 'A' Circuit
Quick Answer
The P0335 code for a 1999 Toyota Camry indicates a problem with the vehicle's Crankshaft Position Sensor 'A' Circuit. Common causes include Faulty crankshaft position sensor, Damaged wiring or connectors, Corrosion in the sensor circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 1999 Toyota Camry indicates Crankshaft Position Sensor 'A' Circuit .
- Common causes
- Common causes include Faulty crankshaft position sensor, Damaged wiring or connectors, Corrosion in the sensor circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0335 1999 Toyota Camry Description
The P0335 code for a 1999 Toyota Camry indicates a problem with the vehicle's Crankshaft Position Sensor 'A' Circuit. The crankshaft position sensor is a crucial component in the engine management system, as it monitors the position and rotational speed of the crankshaft. This information is used by the engine control module (ECM) to determine the ignition timing and fuel injection timing.
Common Causes of P0335 1999 Toyota Camry
- Faulty crankshaft position sensor
- Damaged wiring or connectors
- Corrosion in the sensor circuit
- Issues with the ECM
- Engine vibrations causing sensor malfunction
Symptoms of P0335 1999 Toyota Camry
- Engine misfires
- Rough idle
- Difficulty starting the engine
- Engine stalling
- Decreased fuel efficiency
How to Fix P0335 1999 Toyota Camry
- Diagnose the issue by using a scan tool to read the code and check the crankshaft position sensor's operation.
- Inspect the sensor, wiring, and connectors for any visible damage or corrosion.
- Replace the crankshaft position sensor if it is found to be faulty.
- Repair or replace any damaged wiring or connectors.
- Clear the diagnostic trouble codes and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0335 1999 Toyota Camry
The cost of repairing a Crankshaft Position Sensor 'A' Circuit issue in a 1999 Toyota Camry can vary depending on the specific cause of the problem. On average, the cost of replacing a crankshaft position sensor ranges from $50 to $200, while the cost of labor can range from $80 to $150 per hour. Therefore, the total repair cost can range from $150 to $400 or more. It's recommended to consult with a qualified mechanic or auto repair shop to get an accurate estimate based on your specific situation.
Tech Notes for P0335 1999 Toyota Camry
When is the Code Detected?
Need more information about the P0335 1999 Toyota Camry code?
Need more information on how to fix the P0335 1999 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 1999 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 1999 Toyota Camry Code
1. What are common symptoms of OBDII code P0335 in a 1999 Toyota Camry?
- Common symptoms include engine stalling, rough idling, difficulty starting the engine, and a decrease in fuel efficiency.
2. What does the OBDII code P0335 indicate in a 1999 Toyota Camry?
- The code P0335 indicates a problem with the Crankshaft Position Sensor 'A' Circuit in the 1999 Toyota Camry.
3. What are some possible causes of OBDII code P0335 in a 1999 Toyota Camry?
- Possible causes include a faulty crankshaft position sensor, damaged wiring or connectors in the sensor circuit, or issues with the sensor's alignment.
4. How can I diagnose the reason behind OBDII code P0335 in my 1999 Toyota Camry?
- You can diagnose the issue by checking the condition of the crankshaft position sensor, inspecting the wiring and connectors for damage, and performing a scan tool test to monitor sensor readings.
5. Is it safe to continue driving my 1999 Toyota Camry with OBDII code P0335?
- It is not recommended to drive the vehicle with this code as it can lead to potential engine issues and further damage if left unresolved.
6. Can I repair OBDII code P0335 in my 1999 Toyota Camry myself?
- Depending on your mechanical skills, you may be able to replace the crankshaft position sensor yourself. However, it is recommended to consult a professional mechanic for accurate diagnosis and repair.
7. How much does it typically cost to repair OBDII code P0335 in a 1999 Toyota Camry?
- The cost can vary depending on the exact cause of the issue, but typically, replacing the crankshaft position sensor can range from $100 to $300 including parts and labor.
8. Are there any preventive measures to avoid OBDII code P0335 in a 1999 Toyota Camry?
- Regular maintenance, such as checking the condition of the sensors and wiring, can help prevent issues related to the crankshaft position sensor.
9. Can a faulty Crankshaft Position Sensor 'A' Circuit affect the performance of my 1999 Toyota Camry?
- Yes, a faulty sensor can lead to engine misfires, poor acceleration, and other performance issues in the 1999 Toyota Camry.
10. How long does it take to repair OBDII code P0335 in a 1999 Toyota Camry?
- The repair typically takes around 1-2 hours, but the exact duration can vary depending on the complexity of the issue and the mechanic's expertise.
Discuss the causes and fixes for P0335 1999 Toyota Camry OBDII Code
Code P0335 1999 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.