Engine-Codes.com
Engine-Codes – Honda – P0335 1998 Honda Civic

P0335 1998 Honda Civic Code - Crankshaft Position Sensor 'A' No Signal

Quick Answer

The P0335 code for a 1998 Honda Civic indicates a problem with the Crankshaft Position Sensor 'A', specifically that there is no signal being received from the sensor. Common causes include Faulty crankshaft position sensor, Damaged or corroded wiring/connectors leading to the sensor, ECU malfunction or communication error. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0335 1998 Honda Civic indicates Crankshaft Position Sensor 'A' No Signal.
Common causes
Common causes include Faulty crankshaft position sensor, Damaged or corroded wiring/connectors leading to the sensor, ECU malfunction or communication error.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 10, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0335 1998 Honda Civic Description

The P0335 code for a 1998 Honda Civic indicates a problem with the Crankshaft Position Sensor 'A', specifically that there is no signal being received from the sensor. The crankshaft position sensor is a vital component in the engine management system, as it provides the ECU (Engine Control Unit) with the necessary information about the position and speed of the crankshaft. This data is crucial for determining the ignition timing and fuel injection timing, among other things.

OBDII Code P0335 1998 Honda Civic - Crankshaft Position Sensor 'A' No Signal
P0335 1998 Honda Civic Code - Crankshaft Position Sensor 'A' No Signal

Common Causes of P0335 1998 Honda Civic

  1. Faulty crankshaft position sensor
  2. Damaged or corroded wiring/connectors leading to the sensor
  3. ECU malfunction or communication error
  4. Crankshaft position sensor out of alignment
  5. Timing belt or chain issues affecting sensor operation

Symptoms of P0335 1998 Honda Civic

  1. Difficulty starting the engine or engine not starting at all
  2. Rough idling, misfires, or stalling
  3. Loss of power or hesitation during acceleration
  4. Check Engine Light illuminated on the dashboard
  5. Limp mode activation, limiting engine performance

How to Fix P0335 1998 Honda Civic

  1. Diagnose the issue by using a scan tool to confirm the P0335 code and checking the sensor's wiring and connections.
  2. Test the crankshaft position sensor using a multimeter to ensure it is functioning correctly.
  3. Replace the faulty crankshaft position sensor if it is found to be defective.
  4. Repair or replace any damaged wiring or connectors leading to the sensor.
  5. Clear the fault code from the ECU memory and perform a test drive to verify that the issue has been resolved.

Cost to Fix P0335 1998 Honda Civic

The cost of repairing a P0335 code on a 1998 Honda Civic can vary depending on the specific cause of the issue and the labor rates in your area. Typically, replacing a faulty crankshaft position sensor can cost between $100 and $300 for the part alone. Labor costs can range from $100 to $200, bringing the total repair cost to approximately $200 to $500. It's important to factor in additional diagnostic time and any other necessary repairs that may be identified during the diagnostic process. As always, it's advisable to obtain quotes from local auto repair shops to get a more accurate estimate for your specific situation.

What does this mean?

Tech Notes for P0335 1998 Honda Civic

Sometimes and in some models, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replaced battery.

When is the Code Detected?

The crankshaft position sensor (POS) signal is not detected by the Electronic Control Module (ECM) during the first few seconds of engine cranking

Need more information about the P0335 1998 Honda Civic code?

Need more information on how to fix the P0335 1998 Honda Civic code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0335 1998 Honda Civic code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0335 1998 Honda Civic Code

1. What are the common symptoms of OBDII code P0335 in a 1998 Honda Civic?

The common symptoms of OBDII code P0335 in a 1998 Honda Civic include stalling, rough idling, difficulty starting the engine, and potential loss of power while driving.

2. What does the OBDII code P0335 on a 1998 Honda Civic indicate?

OBDII code P0335 on a 1998 Honda Civic indicates a malfunction in the crankshaft position sensor 'A', specifically that there is no signal being received from this sensor.

3. What are the possible causes of OBDII code P0335 in a 1998 Honda Civic?

Possible causes of OBDII code P0335 in a 1998 Honda Civic include a faulty crankshaft position sensor, damaged sensor wiring, poor electrical connections, or a problem with the sensor's reluctor ring.

4. How can I diagnose the cause of OBDII code P0335 in my 1998 Honda Civic?

To diagnose the cause of OBDII code P0335 in a 1998 Honda Civic, you can start by checking the wiring and connections to the crankshaft position sensor, testing the sensor itself for proper function, and inspecting the reluctor ring for damage.

5. Can a faulty crankshaft position sensor cause OBDII code P0335 in a 1998 Honda Civic?

Yes, a faulty crankshaft position sensor is a common cause of OBDII code P0335 in a 1998 Honda Civic, as the sensor is responsible for providing the engine's computer with information about the crankshaft's position and speed.

6. How can I repair OBDII code P0335 in my 1998 Honda Civic?

To repair OBDII code P0335 in a 1998 Honda Civic, you may need to replace the crankshaft position sensor, repair or replace any damaged wiring or connections, or address any issues with the reluctor ring.

7. Is it safe to continue driving with OBDII code P0335 in a 1998 Honda Civic?

It is not recommended to continue driving with OBDII code P0335 in a 1998 Honda Civic, as it can lead to further engine problems, poor performance, and potential stalling while driving.

8. Can a DIY enthusiast fix OBDII code P0335 in a 1998 Honda Civic?

Depending on their skill level and access to tools, a DIY enthusiast may be able to fix OBDII code P0335 in a 1998 Honda Civic by following repair guides and using proper diagnostic equipment.

9. How much does it cost to repair OBDII code P0335 in a 1998 Honda Civic at a mechanic?

The cost to repair OBDII code P0335 in a 1998 Honda Civic at a mechanic can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.

10. Can a bad battery cause OBDII code P0335 in a 1998 Honda Civic?

While a bad battery can cause various electrical issues in a vehicle, it is less likely to directly cause OBDII code P0335 in a 1998 Honda Civic. It is more commonly related to the crankshaft position sensor or its components.

Discuss the causes and fixes for P0335 1998 Honda Civic OBDII Code

Submit a New Comment

Code P0335 1998 Honda Civic comments

No comments found for this page.