Engine-Codes.com
Engine-Codes – Honda – P0335 1996 Honda Civic

P0335 1996 Honda Civic Code - Crankshaft Position Sensor 'A' No Signal

Quick Answer

The P0335 diagnostic trouble code (DTC) for a 1996 Honda Civic indicates that there is a problem with the crankshaft position sensor 'A' not sending a signal to the engine control module (ECM). Common causes include Faulty crankshaft position sensor, Damaged or corroded sensor wiring, Loose or disconnected sensor connector. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0335 1996 Honda Civic indicates Crankshaft Position Sensor 'A' No Signal.
Common causes
Common causes include Faulty crankshaft position sensor, Damaged or corroded sensor wiring, Loose or disconnected sensor connector.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 13, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0335 1996 Honda Civic Description

The P0335 diagnostic trouble code (DTC) for a 1996 Honda Civic indicates that there is a problem with the crankshaft position sensor 'A' not sending a signal to the engine control module (ECM). The crankshaft position sensor is a vital component in the engine management system, as it provides the ECM with information about the position and speed of the crankshaft. This information is crucial for the ECM to accurately control fuel injection timing and ignition timing. When the sensor fails to send a signal, the ECM may not be able to determine the correct timing for these processes, leading to poor engine performance, misfires, and potentially stalling.

OBDII Code P0335 1996 Honda Civic - Crankshaft Position Sensor 'A' No Signal
P0335 1996 Honda Civic Code - Crankshaft Position Sensor 'A' No Signal

Common Causes of P0335 1996 Honda Civic

  1. Faulty crankshaft position sensor
  2. Damaged or corroded sensor wiring
  3. Loose or disconnected sensor connector
  4. ECM software or hardware issues
  5. Engine timing belt or chain problems

Symptoms of P0335 1996 Honda Civic

  1. Engine misfires or runs rough
  2. Difficulty starting or no start condition
  3. Engine stalling while driving
  4. Loss of power or hesitation during acceleration
  5. Illumination of the Check Engine Light

How to Fix P0335 1996 Honda Civic

  1. Diagnose the issue by using a scan tool to check for the P0335 code and perform a visual inspection of the crankshaft position sensor and its wiring.
  2. Test the crankshaft position sensor using a multimeter to verify if it is sending a signal to the ECM.
  3. Replace the crankshaft position sensor if it is found to be faulty, ensuring proper installation and connection.
  4. Inspect and repair any damaged wiring or connectors associated with the sensor.
  5. Clear the DTC and test drive the vehicle to confirm that the issue has been resolved.

Cost to Fix P0335 1996 Honda Civic

The typical repair costs for addressing a P0335 code in a 1996 Honda Civic can vary depending on the specific cause of the issue. In general, the cost of a new crankshaft position sensor ranges from $50 to $150, depending on the brand and quality. Labor costs for sensor replacement and diagnostic testing can range from $100 to $300, depending on the shop's hourly rates and the complexity of the repair. Overall, the total cost for resolving a P0335 code in a 1996 Honda Civic may range from $150 to $450. It's important to note that these estimates are approximate, and actual costs may vary based on factors such as location, vehicle make and model, and the extent of the repair needed. It's recommended to obtain quotes from local auto repair shops for a more accurate cost estimate.

What does this mean?

Tech Notes for P0335 1996 Honda Civic

Sometimes and in some models, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replaced battery.

When is the Code Detected?

The crankshaft position sensor (POS) signal is not detected by the Electronic Control Module (ECM) during the first few seconds of engine cranking

Need more information about the P0335 1996 Honda Civic code?

Need more information on how to fix the P0335 1996 Honda Civic code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0335 1996 Honda Civic code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0335 1996 Honda Civic Code

1. What are the common symptoms of OBDII code P0335 in a 1996 Honda Civic?

- Common symptoms include engine stalling, rough idling, difficulty starting the vehicle, and a decrease in overall engine performance.

2. What does OBDII code P0335 indicate in a 1996 Honda Civic?

- This code indicates a problem with the Crankshaft Position Sensor 'A', specifically that there is no signal being received from the sensor.

3. What are some possible causes of OBDII code P0335 in a 1996 Honda Civic?

- Possible causes include a faulty crankshaft position sensor, damaged wiring or connectors related to the sensor, or issues with the sensor's alignment or mounting.

4. How can I diagnose the cause of OBDII code P0335 in my 1996 Honda Civic?

- To diagnose the issue, you can use a multimeter to test the crankshaft position sensor for proper voltage and resistance, visually inspect the sensor and its wiring for any damage, and check the sensor's alignment.

5. Can a faulty crankshaft position sensor cause other problems in a 1996 Honda Civic besides triggering code P0335?

- Yes, a faulty crankshaft position sensor can also lead to issues like misfiring, poor fuel economy, and problems with the vehicle's transmission.

6. How do I repair OBDII code P0335 in my 1996 Honda Civic?

- Repairing this code typically involves replacing the crankshaft position sensor with a new, OEM-quality sensor and ensuring that all wiring and connectors are in good condition.

7. Is it safe to continue driving my 1996 Honda Civic with OBDII code P0335 present?

- It is not recommended to continue driving your vehicle with this code, as it can lead to further engine damage and potential safety hazards on the road.

8. Can a DIY enthusiast fix OBDII code P0335 in a 1996 Honda Civic?

- Yes, if you have the necessary tools and mechanical skills, replacing the crankshaft position sensor can be a DIY project. However, if you are unsure, it's best to consult a professional mechanic.

9. How much does it cost to repair OBDII code P0335 in a 1996 Honda Civic at a repair shop?

- The cost of repairing this code at a repair shop can vary depending on the labor rates and the cost of parts, but it typically ranges from $150 to $300.

10. Will clearing the OBDII code P0335 in my 1996 Honda Civic make the issue go away?

- Clearing the code may temporarily turn off the check engine light, but if the underlying issue with the crankshaft position sensor is not addressed, the code is likely to reappear.

Discuss the causes and fixes for P0335 1996 Honda Civic OBDII Code

Submit a New Comment

Code P0335 1996 Honda Civic comments

No comments found for this page.