P0333 GMC Code - Knock Sensor Circuit High Voltage Bank 2
Quick Answer
The P0333 GMC code refers to a problem with the knock sensor circuit in Bank 2 of the vehicle's engine. Common causes include Faulty knock sensor, Wiring issues or shorts in the knock sensor circuit, Engine mechanical problems causing excessive vibrations. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0333 GMC indicates Knock Sensor Circuit High Voltage Bank 2.
- Common causes
- Common causes include Faulty knock sensor, Wiring issues or shorts in the knock sensor circuit, Engine mechanical problems causing excessive vibrations.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0333 GMC Description
The P0333 GMC code refers to a problem with the knock sensor circuit in Bank 2 of the vehicle's engine. The knock sensor is responsible for detecting abnormal vibrations or knocking noises in the engine, which could indicate issues like pre-ignition or knocking. When the knock sensor circuit reports high voltage in Bank 2, it means that the sensor is detecting too much vibration or noise, even if it may not be present, leading to false readings. This can potentially lead to poor engine performance, reduced fuel efficiency, and in severe cases, engine damage due to incorrect ignition timing.
Common Causes of P0333 GMC
- Faulty knock sensor
- Wiring issues or shorts in the knock sensor circuit
- Engine mechanical problems causing excessive vibrations
- Faulty engine control module (ECM)
- Incorrect fuel octane levels causing pre-ignition
Symptoms of P0333 GMC
- Engine knocking or pinging noises
- Decreased engine performance
- Poor fuel efficiency
- Illuminated check engine light
- Engine misfires
How to Fix P0333 GMC
- Diagnose the issue by using a scan tool to pinpoint the exact cause of the high voltage reading in Bank 2.
- Inspect the wiring and connections related to the knock sensor for any damage or corrosion.
- Test the knock sensor using a multimeter to check for proper functionality.
- Replace the knock sensor if it is faulty or showing incorrect readings.
- Clear the diagnostic trouble codes, reset the ECM, and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0333 GMC
The cost of repairing a P0333 GMC code can vary depending on the exact cause of the issue and the labor rates in your area. Typically, replacing a knock sensor can cost between $100 and $300, including parts and labor. Additional costs may be incurred if wiring repairs or ECM replacement are necessary. It's recommended to consult with a mechanic or auto repair shop for an accurate estimate based on your specific vehicle and location.
Tech Notes for P0333 GMC
Need more information about the P0333 GMC code?
Need more information on how to fix the P0333 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0333 GMC code diagnosed by a professional: Find a repair shop in your area
Information for Specific GMC Models
- P0333 2014 GMC Sierra — Knock Sensor Circuit High Voltage Bank 2
- P0333 2015 GMC Sierra — Knock Sensor Circuit High Voltage Bank 2
- P0333 2016 GMC Sierra — Knock Sensor Circuit High Voltage Bank 2
- P0333 2017 GMC Sierra — Knock Sensor Circuit High Voltage Bank 2
- P0333 2018 GMC Sierra — Knock Sensor Circuit High Voltage Bank 2
Frequently Asked Questions about P0333 GMC Code
What does the OBDII code P0333 on a GMC mean?
P0333 indicates a high voltage condition in the knock sensor circuit on Bank 2, which monitors engine vibrations caused by detonation or pre-ignition.
What are common symptoms of the P0333 code?
Symptoms include engine knocking or pinging, reduced fuel efficiency, poor acceleration, and possibly an illuminated check engine light.
What causes the P0333 code on a GMC?
Common causes include a faulty knock sensor, damaged sensor wiring or connectors, issues with the engine control module (ECM), or excessive engine noise.
Can a bad knock sensor cause engine damage?
Yes, if the knock sensor fails to detect detonation, prolonged pre-ignition can lead to severe engine damage over time.
How is the P0333 code diagnosed?
Technicians typically use a scan tool to check for stored codes, inspect the knock sensor and wiring for damage, and test the sensor’s voltage output.
Can I drive my GMC with the P0333 code?
Driving with the P0333 code may be possible, but it’s not recommended due to potential engine damage from undetected knocking or inefficient performance.
How can I fix the P0333 code on my GMC?
Repairs may include replacing the faulty knock sensor, repairing or replacing damaged wiring, or reprogramming the ECM if necessary.
Where is the knock sensor located on a GMC vehicle?
The knock sensor is typically located on the engine block, cylinder head, or intake manifold, depending on the specific GMC model.
Will replacing the knock sensor clear the P0333 code?
Replacing the knock sensor may resolve the issue, but it’s important to check the wiring and connectors to ensure the problem doesn’t persist.
What tools are needed to fix the P0333 code?
Basic tools include a multimeter for testing voltage, a socket set for sensor removal, and possibly a scan tool to clear the fault code after repairs.
Discuss the causes and fixes for P0333 GMC OBDII Code
Code P0333 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.