P0332 Buick Code - Knock Sensor Circuit Low Voltage Bank 2
Quick Answer
The P0332 Buick code indicates a problem with the knock sensor circuit in Bank 2 of the vehicle. Common causes include Faulty knock sensor in Bank 2, Damaged or corroded wiring connecting the knock sensor to the ECM, ECM malfunction. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0332 Buick indicates Knock Sensor Circuit Low Voltage Bank 2.
- Common causes
- Common causes include Faulty knock sensor in Bank 2, Damaged or corroded wiring connecting the knock sensor to the ECM, ECM malfunction.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0332 Buick Description
The P0332 Buick code indicates a problem with the knock sensor circuit in Bank 2 of the vehicle. The knock sensor is a crucial component that detects engine vibrations caused by pre-ignition or knocking, allowing the engine control module (ECM) to adjust the ignition timing accordingly. A low voltage reading from the knock sensor in Bank 2 suggests that there may be an issue with the sensor itself, the wiring connecting the sensor to the ECM, or the ECM's ability to interpret the sensor's signals.
Common Causes of P0332 Buick
- Faulty knock sensor in Bank 2
- Damaged or corroded wiring connecting the knock sensor to the ECM
- ECM malfunction
- Engine overheating causing sensor damage
- Electrical system issues causing voltage drop
Symptoms of P0332 Buick
- Engine misfires
- Decreased acceleration
- Poor fuel economy
- Increased emissions
- Engine knocking or pinging
How to Fix P0332 Buick
- Diagnose the issue by using a scan tool to read the code and verify the knock sensor's voltage reading.
- Inspect the wiring harness connecting the knock sensor to the ECM for any damage or corrosion, repairing or replacing as needed.
- Test the knock sensor's functionality using a multimeter to ensure it is sending the correct signals to the ECM.
- If the knock sensor is faulty, replace it with a new sensor compatible with your vehicle's make and model.
- Clear the diagnostic trouble codes from the ECM's memory and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0332 Buick
The cost of repairing a P0332 Buick code can vary depending on the specific cause of the issue. In general, replacing a knock sensor can cost between $100 and $300, including parts and labor. If wiring repairs are needed, the cost may increase slightly. Additionally, diagnostic time and labor rates at auto repair shops can vary, typically ranging from $80 to $150 per hour. It's recommended to consult with a professional mechanic to get a more accurate estimate based on your vehicle's make and model.
Tech Notes for P0332 Buick
Need more information about the P0332 Buick code?
Need more information on how to fix the P0332 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0332 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0332 Buick Code
No Frequently Asked Questions about P0332 Buick Code found.
Discuss the causes and fixes for P0332 Buick OBDII Code
Code P0332 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.